MH3024 Wheel Material Handler | Cat

Engine

Engine Model	Cat C4.4 Cat C4.4
Net Power - ISO 9249	171 hp 128 kW
Net Power - ISO 9249 (DIN)	174 hp (metric) 174 hp (metric)
Engine Power - Maximum - ISO 14396	174 hp 129 kW
Engine Power - ISO 14396 (DIN)	176 hp (metric) 176 hp (metric)
Bore	4.1 in 105 mm
Stroke	5.3 in 135 mm
Displacement	268.5 in³ 4.4 l
Biodiesel Capability	Up to B20¹ Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Maximum Gross - ISO 14396	129.4 kW (174 hp [176 hp/PS]) 129.4 kW (174 hp [176 hp/PS])

Transmission

Maximum Gradeability (23 500 kg/51,810 lb)	65 65
Maximum Travel Speed (with steering wheel)	12.4 mile/h 20 km/h
Maximum Travel Speed (with joysticks)	9.3 mile/h 15 km/h
Drawbar Pull	28551 lb/ft 127 kN

Hydraulic System

Maximum Pressure - Implements	5366 psi 37000 kPa
Maximum Pressure - Travel	5075 psi 35000 kPa
Maximum Pressure - Swing	5656 psi 39000 kPa

Machine Weights

Maximum Operating Weight	59100 lb 26800 kg
Minimum Operating Weight	50050 lb 22700 kg

Service Refill Capacities

Fuel Tank Capacity	92.5 gal (US) 350 l
Engine Oil	3.4 gal (US) 13 l
Hydraulic Tank	40.9 gal (US) 155 l
Hydraulic System - Including Tank	91.1 gal (US) 345 l
Rear Axle - Housing (Differential)	3.7 gal (US) 14 l
Front Steering Axle - Differential	2.8 gal (US) 10.5 l
Powershift Transmission	0.7 gal (US) 2.5 l

Service Refill Capabilities

Diesel Exhaust Fluid Tank	7.9 gal (US) 30 l
Cooling System	9.5 gal (US) 36 l
Final Drive - Each	0.7 gal (US) 2.5 l
Hydraulic Tank Capacity	40.4 gal (US) 153 l
Fuel Tank	87 gal (US) 330 l
Hydraulic System Capacity	66.8 gal (US) 253 l

Swing Mechanism

Maximum Swing Torque	42631 ft·lbf 58 kN·m
Swing Speed	8.2 r/min 8.2 r/min

Dimensions

Boom	MH Boom 7.45 m (24'5") MH Boom 7.45 m (24'5")
Stick	Drop Nose 5 m (16'5") Drop Nose 5 m (16'5")
Undercarriage Width	9.8 ft 2990 mm
Shipping Height (with OPG, without stick)	11 ft 3350 mm
Shipping Length	35 ft 10670 mm
Shipping Length (with push blade)	36.5 ft 11130 mm
Machine Length	17.3 ft 5290 mm
Machine Length (with push blade)	18.8 ft 5740 mm
Tail Swing Radius	8.5 ft 2600 mm
Counterweight Clearance	4.3 ft 1300 mm
Cab Height- Lowered	11 ft 3350 mm
Cab Height-Lowered with OPG	11 ft 3350 mm
Cab Height-Raised	18.9 ft 5750 mm
Cab Height-Raised with OPG	18.9 ft 5750 mm
Wheel Base	9 ft 2750 mm
Shipping Width	9.8 ft 2990 mm
Ground Clearance	1.1 ft 320 mm
Undercarriage Length	17.4 ft 5300 mm
Undercarriage Length (with push blade)	18.8 ft 5740 mm
Upper Frame Width (including handrails)	8.3 ft 2540 mm

Air Conditioning System

Note (1)

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg of refrigerant, which has a CO2 equivalent of 1.502 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg of refrigerant, which has a CO2 equivalent of 1.502 metric tonnes.

Working Ranges

Maximum Reach	39.4 ft 12010 mm
Boom	MH Boom 7.45 m (24'5") MH Boom 7.45 m (24'5")
Stick	Drop Nose 5 m (16'5") Drop Nose 5 m (16'5")
Maximum Height	42.8 ft 13030 mm
Minimum Dump Height	14.8 ft 4520 mm
Maximum Reach at Ground Line	38.9 ft 11870 mm
Maximum Depth	9.9 ft 3010 mm
Boom Pin Height	30.4 ft 9260 mm