Height: Ground to Cab**
|
8.08 ft
2468 mm
|
Height: Ground to Beacon**
|
8.67 ft
2651 mm
|
Height: Ground Axle Center**
|
1.58 ft
480 mm
|
Height: Ground Clearance**
|
1 ft
300 mm
|
Length: Overall*
|
17.58 ft
5369 mm
|
Length: Rear Axle to Bumper
|
4.58 ft
1391 mm
|
Length: Hitch to Front Axle
|
3.58 ft
1085 mm
|
Length: Wheel Base
|
7.08 ft
2170 mm
|
Clearance: Bucket at 45° *
|
8.25 ft
2510 mm
|
Clearance: Load over Height**
|
9.5 ft
2902 mm
|
Clearance: Level Bucket**
|
9.92 ft
3037 mm
|
Height: Bucket Pin**
|
10.67 ft
3251 mm
|
Height: Overall**
|
13.5 ft
4122 mm
|
Reach: Bucket at 45° *
|
2.42 ft
725 mm
|
Carry Height: Bucket Pin
|
1.08 ft
321 mm
|
Dig Depth**
|
0.33 ft
113 mm
|
Width: Bucket
|
6.17 ft
1890 mm
|
Width: Tread Center
|
4.67 ft
1420 mm
|
Turning Radius: Over Bucket
|
14.17 ft
4327 mm
|
Width: Over Tires
|
6.08 ft
1848 mm
|
Turning Radius: Outside of Tires
|
12.92 ft
3925 mm
|
Turning Radius: Inside of Tires
|
6.75 ft
2057 mm
|
Rack Angle at Full Lift
|
56°
56°
|
Dump Angle at Full Lift
|
45°
45°
|
Rack Angle at Carry
|
51°
51°
|
Departure Angle - Degrees
|
30°
30°
|
Articulation Angle - Degrees
|
39°
39°
|
Operating Weight: Bucket ^
|
12632 lb
5730 kg
|
Tipping Load - Straight - ISO 14397-1 †
|
9760 lb
4427 kg
|
Tipping Load - Full Turn - ISO 14397-1 †
|
8225 lb
3731 kg
|
Operating Weight: Carriage and Tines ^^
|
12240 lb
5552 kg
|
Tipping Load - Straight †
|
7748 lb
3514 kg
|
80% of Tip: Firm and Level EN474-3 ††
|
5211 lb
2364 kg
|
Note (1)
|
*Vary with bucket
*Vary with bucket
|
Note (2)
|
**Vary with tire
**Vary with tire
|
Note (3)
|
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
|
Note (4)
|
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
|
Note (5)
|
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
|
Note (6)
|
††Full compliance to EN474-3 and SAE J1197.
††Full compliance to EN474-3 and SAE J1197.
|
Note (7)
|
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
|
Note (8)
|
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines (tire supplier variability can impact dimensions by 2%).
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines (tire supplier variability can impact dimensions by 2%).
|
Note (9)
|
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
|
Length: Front Axle to Front of Coupler
|
3.5 ft
1065 mm
|
Tipping Load - Full Turn †
|
6514 lb
2955 kg
|