Three Axle Articulated Trucks 745

Request A Price Find Dealer

Key Specs

Engine Model: Cat® C18; Cat® C18

Rated Payload: 45.2 ton (US); 41 t

Heaped (SAE 2:1): 33.4 yd³; 25.5 m³

745
Change model

Overview

Maximize Productivity

The Cat® 745 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Benefits

UP TO 50% LESS OPERATOR INPUT

A uniquely combined hoist and transmission lever allows for easy operation which suits a wide range of operator experience

IMPROVED OPERATOR COMFORT

Quieter, more spacious cab with improved visibility helps operators work more productively throughout the day

UNMATCHED SAFETY

Safety features help increase operator confidence by providing a safer operation - prevention of cab and body roll-over and safer cab entry

Features At A Glance

Every Cat engine equivalent to Tier 2/Stage II is equipped with a combination of proven electronic, fuel, air and aftertreatment components. The right technologies fine-tuned for the right applications result in:
Proven electronic, fuel, air and aftertreament components for peak performance, longevity and emissions control.
Improved fuel economy.
Reduced maintenance costs.
Advanced MEUI-C injector platforms deliver increased injection pressures and more precise fuel rates. These durable injectors enhance responsiveness while controlling soot.
Innovative air management optimizes airflow, power, efficiency and reliability.
The Cat High Density Power Shift (HDPS) nine-speed forward/two-speed reverse transmission designed specifically for Articulated Trucks, features Advanced Productivity Electronic Control Strategy (APECS) and Electronic Clutch Pressure Control (ECPC) that deliver smooth gear changes with improved acceleration and higher productivity.* Gear shifts are configured to maintain direct drive lock-up and minimize dropping into converter drive to maintain ground speed and gradeability.
Large capacity torque converter ensures maximum power delivered to drive train.
Engine compression brake improves retarding response and increases retarding power.

Advanced Automatic Traction Control (AATC) proactively applies inter- and cross-axle differential locks ‘on-the-go.’ Operators are freed from this function to concentrate on driving/loading/dumping. Sensors monitor the machine and wheel speeds, enabling instant response in high rolling resistance conditions. Operation is seamless and smooth, eliminating wheel slip for maximum traction and productivity.
Clutches are automatically disengaged when ground conditions allow, maximizing efficiency when steering or when on uneven ground.
AATC reduces tire and driveline abuse, eliminating lost machine efficiencies caused by improper manual operation of the differential clutches and reducing the tire wear.
Automatic Retarder Control (ARC) automates the retarder for the operator. Like AATC, a number of machine operating aspects are monitored. If required, the engine compression brake is engaged automatically to control machine speed when descending a grade. The system can help towards eliminating engine overspeed, improving safe machine operation and reducing cycle times, yet still having the flexibility of manual control if needed.
New Assisted Hoisting Control automates the dumping function. Flick the new body raise/lower switch and the machine will apply the service brakes, switch the transmission to neutral and raise the body at the required engine rpm. Lowering the dump body is done the same way, flick the switch and the machine will lower the body and place it in float.

All three axles promote stability using oscillating a-frames with lateral tie rods. Operate at productive speeds with confidence while virtually eliminating impact loads on truck components.
The front suspension oscillates controlled by large-bore, low-pressure cylinders to assist in a smooth ride. An A-frame with lateral tie rod controls sideways movement and aids stability.
The rear suspension features a walking beam and long-life suspension mounts optimizing ride and load retention.
New fully enclosed wet disc brake systems inside of axles keeps contaminants out extending machine life and ensuring uptime.
Hill assist reduces potential 'roll-back' on grades. If an operator stops the machine on a grade, when taking his foot off the service brake pedal the machine will automatically hold the service brakes on for a number of seconds to prevent the machine from rolling backwards.
Waiting brake applies the service brakes when neutral gear is selected, allowing quick and easy control of the machine at the load or dump area.

Spacious cab delivers comfort all shift long and is 7dB quieter than prior model.
Unique combination hoist/transmission lever is intuitive and enhances cycle times with fewer control movements.
Trainer/passenger seat is fully padded with wide, retractable seat belt for security and comfort.
New large side storage box is heated/cooled by the HVAC system.
Air-suspension seat offers greater comfort, with a greater range of adjustments. Fore/aft isolation dramatically reduces vibrations and jolts. Every operator will find a adjustments to ensure comfort and control all shift long.
Standard cooling/heating system ensures comfort in all conditions.
Optional four-point seat belt is available to help operator stay in position and comfortable in rugged terrain.
Integrated, wrap-around dash means all gauges and controls are easy to monitor and access. Automotive feel with Caterpillar's renowned industrial strength.
The updated touch screen dash mounted display allows the operator to monitor and adjust various levels of machine performance and condition, as well as machine warning categories. These include configuration settings, operator and machine totals, service information, various machine status parameters, machine payload information (when fitted), stability assist, and the video feed from the rearview camera.
Optional Bluetooth™ entertainment system allows operator to stay in hands-free phone contact.

Box section front frame absorb is stiff to handle torque loads. Frame design decreases stress at the hitch and optimizes suspension geometry.
Rear frame features twin-box construction minimizing stress points and enhancing service life.
The articulating hitch provides the truck with steering articulation, and the oscillation ensures all-wheel ground contact in rough terrain.
Field proven two-piece hitch construction features a durable cast steel head bolted to a hard wearing forged steel tube.
Dump body design provides a large target area for consistent high-load carrying capacity increasing productivity. Diverging flow when dumping aids material flow out of the body maximizing productivity and avoiding carry-back.
The output transfer gear distributes drive to the tractor and trailer and includes a wet clutch differential lock for optimum traction in poor underfoot conditions.
The full power hydraulic brake system actuates enclosed, oil-immersed, multi-disc, multi-plate brakes with independent front and rear circuits and accumulators. This dual-circuit, all wheel braking system provides the braking performance required to support maximum productivity.
The parking brake is located on the center axle in an elevated position, it is spring applied and hydraulically released.

Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. The system tracks location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink user interface so you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
Cat Production Measurement brings payload weighing to the cab to help optimize job site efficiency and productivity. Operators can view real-time load weights on the integrated display and know precisely when target is achieved, while cab-mounted external payload lights on all four corners signal the loader operator when to stop, reducing the risk of machine overloading. Operators can track daily productivity from the cab, with quick access to truck payload weights, loads and cycle counts, and daily totals; or remotely via LINK technologies.
Cat Detect with Stability Assist warns the operator if machine is approaching a pre-set angle during operation; when driving and tipping. If using the assisted hoist, the machine will stop hoisting the body and give an audible and visual warning. The system monitors angles of tractor, trailer and grade independently. This increases operator awareness of machine stability during operation. All tractor and/or trailer rollover events are logged and reported via VisionLink.

Caterpillar design, manufacturing and customer service help ensure peak performance and uptime.
Long service intervals keep your machine operating.
Lubrication points are grouped near the hitch for fast, easy routine maintenance.
Universal joints are sealed and lubed for long life.
Optional autolube system saves time and includes alerts via Product Link for low levels and fault codes.
Radiator package is located behind the cab for protection and uses extended-life coolant to stretch change intervals.
Electrical service center is located inside the cab and provides a power port, diagnostic connector and Cat Data Link connector for use with Electronic Technician (ET) software-equipped laptop computer.
Easy access to transmission, drive shafts, hydraulic pumps and electrical and hydraulic interfaces provided with tilt-to-side cab and access panel.
Service points are conveniently located on the left side of the engine, under the electrically raised hood.
Complete customer support is the goal of your Cat dealership. From counsel of product selection, operating costs, operation, maintenance all the way to help with decisions on when and whether to replace or rebuild, your dealer is with you all the way.

Caterpillar designs and functions with great concern for the environment.
Cat C18 engine incorporates the Cat Clean Emission Module (CEM) to meet Tier 4 Final/Stage IV emission standards. The system uses both Ultra-low-sulfur diesel (ULSD) fuel or up to B20 bio-diesel blended with ULSD.
All Cat C Series Articulated Trucks are designed for long lifecycles with machines using reman components and machine rebuilds to maximize use of every part, minimizing waste.
Volume of both hydraulic and engine oil systems has be reduced meaning less waste when oils are replaced.

Seat belt in use indicator (four-point seat belt available as an option)
Operator presence detection (prevents gear engagement when operator is not seated)
Additional mirror for front of machine visibility
Cab mounted, wide angled, folding mirrors
Heated mirrors (optional)
Body raised visual indicator
Cab integral Roll Over Protection System (ROPS) and Falling Object Protection System (FOPS)
Electro-hydraulic secondary steering system automatically activates in forward/reverse or when stationary if low pressure is sensed and can be manually selected for machine recovery purposes
Extensive handrails
External electrical system disconnect switch for easy access from outside of the machine
Fire extinguisher in-cab mounting point
Fully raised body locking pin
Ground level external engine fuel cut-off switch provides easy access outside of the machine
In-cab emergency brake switch (tertiary)
Internal and external grab handles
LED-flashing beacon (optional)
Maximum speed limiter
Multiple camera compatible
New access lights
Rearview camera system is fitted as standard
Reversing indicator
Slip resistant walkways – punched steel plate
The parking brake functions are spring applied and hydraulic released
Cat Detect with Stability Assist

Specifications Standard Equipment Optional Equipment

Product Specifications for 745

Engine

Engine Model	Cat® C18 Cat® C18
Gross Power - SAE J1995:2014	511 hp 381 kW
Net Power - SAE J1349:2011	496 hp 370 kW
Net Power - ISO 14396	504 hp 376 kW
Bore	5.7 in 145 mm
Stroke	7.2 in 183 mm
Displacement	1106 in³ 18.1 l
Note (1)	The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)	Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Emissions	Equivalent to Tier 2/Stage II. Equivalent to Tier 2/Stage II.
No Engine De-rating Required Below	10000 ft 3050 m
Peak Engine Torque Gross (SAE J1995)	1931 ft·lbf 2618 N·m
Peak Engine Torque Net (SAE J1349)	1887 ft·lbf 2558 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

45.2 ton (US) 41 t

Body Capacities

Heaped (SAE 2:1)	33.4 yd³ 25.5 m³
Struck	26 yd³ 19.9 m³
Tailgate Heaped SAE 2:1	35.7 yd³ 27.3 m³
Tailgate Struck	27.3 yd³ 20.9 m³

Transmission

Forward - 1	3.8 mile/h 6.1 km/h
Forward - 2	5 mile/h 8.1 km/h
Forward - 3	7 mile/h 11.2 km/h
Forward - 4	8.8 mile/h 14.1 km/h
Forward - 5	11.6 mile/h 18.7 km/h
Forward - 6	14.2 mile/h 22.9 km/h
Forward - 7	19.6 mile/h 31.5 km/h
Forward - 8	23.5 mile/h 37.9 km/h
Forward - 9	34 mile/h 54.8 km/h
Reverse - 1	4 mile/h 6.4 km/h
Reverse - 2	9.1 mile/h 14.6 km/h

Sound Levels

Interior Cab	72 dB(A) 72 dB(A)
Note (1)	The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty	42285 lb 19180 kg
Center Axle - Empty	15653 lb 7100 kg
Rear Axle - Empty	15058 lb 6830 kg
Total - Empty	72995 lb 33110 kg
Front Axle - Rated Load	12963 lb 5880 kg
Center Axle - Rated Load	38713 lb 17560 kg
Rear Axle - Rated Load	38713 lb 17560 kg
Total - Rated Load	90389 lb 41000 kg
Front Axle - Loaded	55248 lb 25060 kg
Center Axle - Loaded	54366 lb 24660 kg
Rear Axle - Loaded	53771 lb 24390 kg
Total - Loaded	163384 lb 74110 kg

Body Plate

Type	High Strength Brinell HB450 Wear Resistant Steel High Strength Brinell HB450 Wear Resistant Steel
Front	0.28 in 7 mm
Chute	0.55 in 14 mm
Side	0.43 in 11 mm
Base	0.55 in 14 mm

Body Hoist

Raise (manual)	12 s 12 s
Raise (automatic)	13 s 13 s
Lower (manual)	10 s 10 s
Lower (automatic)	10 s 10 s

Service Refill Capacities

Fuel Tank	145.3 gal (US) 550 l
Cooling System	23.7 gal (US) 90 l
Brake Cooling Tank	17.7 gal (US) 67 l
Steering/Hoist Hydraulic System	36.9 gal (US) 140 l
Engine Crankcase	13.7 gal (US) 52 l
Transmission - OTG	19.8 gal (US) 75 l
Final Drive - Each	1.3 gal (US) 5 l
Axles - Each	15.8 gal (US) 60 l

Standards

Brakes	ISO 3450 – 2011 ISO 3450 – 2011
Cab - FOPS	ISO 3449 Level II ISO 3449 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010 – 2019 ISO 5010 – 2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	340 in 8625 mm
Turning Dimensions - Clearance Radius	356 in 9082 mm
Turning Dimensions - Inside Radius	174 in 4413 mm
Turning Dimensions - Aisle Width	233 in 5917 mm
Note	Dimensions are for machines equipped with 29.5R25 tires. Dimensions are for machines equipped with 29.5R25 tires.

Steering

Lock to Lock

4.8 seconds @ 60 rpm 4.8 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavator: 390 - Passes	4 4
Hydraulic Excavator: 374 - Passes	5 5
Wheel Loader: 982 - Passes	4 4
Wheel Loader: 980 - Passes	4-5 4-5
Wheel Loader: 972 - Passes	4-5 4-5
Note	An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

745 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Mirrors: extensive arrangement for improved visibility

Seats:
– Fully adjustable, air suspension
– Padded trainer with lap belt

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Windshield wiper and washer, two speed (rear)

Adjustable air vents

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Air conditioning with R134A refrigerant

Sun visor

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure
– Seat belt warning
– Secondary steering failure
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Secondary steering – electro hydraulic

Window blinds

Windows opening side, tinted

Touch screen display incorporating the rearview camera video feed

Windshield wiper and washer, two speed, intermittent (front)

Two seat belts, operator's retractable

Tilt and telescopic steering wheel

Heater and defroster with variable speed fan

Combined gear selection and hoist control lever

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind seat storage
– Coat hook

CAT TECHNOLOGIES

Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement

Cat Detect with Stability Assist

ELECTRICAL AND LIGHTING

Batteries (two) maintenance free

Electrical system: 24-volt, 5A 24- to 12-volt converter

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Remote starting receptacle (cables not included)

POWER TRAIN

Auto shift nine-speed forward and two reverse transmission

Cat C18 engine

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Three axle, six-wheel drive

SAFETY

Reverse alarm

Rearview camera

ROPS/FOPS cab

GUARDS

Rear window

Radiator

Crankcase

Axle

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Tires, six 29.5R25, radial

Vandalism protection: lockable caps for fuel tank and hydraulic oil tank

745 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Bare chassis (no body) standard wheel base

Bare chassis (no body) long wheel base

Body liners

Bluetooth radio stereo system

Cat Production Measurement payload monitoring system

Cold weather coolant –51° C (–60° F)

Cold weather start attachment

Engine block heater

Ether start

Exhaust heated body

Fast fuel fill

Fender extension

Flashing LED beacon

Four-point seat belt

Fuel additive – anti-waxing

Heated rearview motorized mirrors

Machine Security System (MSS)

Product Link Elite: PLE631 (satellite), PLE641 (cellular)

Roof mounted High Intensity Discharge (HID) work lights

Scissor tailgate

Seat (deluxe) heated/cooled, half leather, air adjustable lumbar and air adjustable bolsters

Sound suppression

875/65 R29 wide tires

Product Specifications for 745

Download Print

Engine

Engine Model	Cat® C18 Cat® C18
Gross Power - SAE J1995:2014	511 hp 381 kW
Net Power - SAE J1349:2011	496 hp 370 kW
Net Power - ISO 14396	504 hp 376 kW
Bore	5.7 in 145 mm
Stroke	7.2 in 183 mm
Displacement	1106 in³ 18.1 l
Note (1)	The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)	Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Emissions	Equivalent to Tier 2/Stage II. Equivalent to Tier 2/Stage II.
No Engine De-rating Required Below	10000 ft 3050 m
Peak Engine Torque Gross (SAE J1995)	1931 ft·lbf 2618 N·m
Peak Engine Torque Net (SAE J1349)	1887 ft·lbf 2558 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

45.2 ton (US) 41 t

Body Capacities

Heaped (SAE 2:1)	33.4 yd³ 25.5 m³
Struck	26 yd³ 19.9 m³
Tailgate Heaped SAE 2:1	35.7 yd³ 27.3 m³
Tailgate Struck	27.3 yd³ 20.9 m³

Transmission

Forward - 1	3.8 mile/h 6.1 km/h
Forward - 2	5 mile/h 8.1 km/h
Forward - 3	7 mile/h 11.2 km/h
Forward - 4	8.8 mile/h 14.1 km/h
Forward - 5	11.6 mile/h 18.7 km/h
Forward - 6	14.2 mile/h 22.9 km/h
Forward - 7	19.6 mile/h 31.5 km/h
Forward - 8	23.5 mile/h 37.9 km/h
Forward - 9	34 mile/h 54.8 km/h
Reverse - 1	4 mile/h 6.4 km/h
Reverse - 2	9.1 mile/h 14.6 km/h

Sound Levels

Interior Cab	72 dB(A) 72 dB(A)
Note (1)	The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty	42285 lb 19180 kg
Center Axle - Empty	15653 lb 7100 kg
Rear Axle - Empty	15058 lb 6830 kg
Total - Empty	72995 lb 33110 kg
Front Axle - Rated Load	12963 lb 5880 kg
Center Axle - Rated Load	38713 lb 17560 kg
Rear Axle - Rated Load	38713 lb 17560 kg
Total - Rated Load	90389 lb 41000 kg
Front Axle - Loaded	55248 lb 25060 kg
Center Axle - Loaded	54366 lb 24660 kg
Rear Axle - Loaded	53771 lb 24390 kg
Total - Loaded	163384 lb 74110 kg

Body Plate

Type	High Strength Brinell HB450 Wear Resistant Steel High Strength Brinell HB450 Wear Resistant Steel
Front	0.28 in 7 mm
Chute	0.55 in 14 mm
Side	0.43 in 11 mm
Base	0.55 in 14 mm

Body Hoist

Raise (manual)	12 s 12 s
Raise (automatic)	13 s 13 s
Lower (manual)	10 s 10 s
Lower (automatic)	10 s 10 s

Service Refill Capacities

Fuel Tank	145.3 gal (US) 550 l
Cooling System	23.7 gal (US) 90 l
Brake Cooling Tank	17.7 gal (US) 67 l
Steering/Hoist Hydraulic System	36.9 gal (US) 140 l
Engine Crankcase	13.7 gal (US) 52 l
Transmission - OTG	19.8 gal (US) 75 l
Final Drive - Each	1.3 gal (US) 5 l
Axles - Each	15.8 gal (US) 60 l

Standards

Brakes	ISO 3450 – 2011 ISO 3450 – 2011
Cab - FOPS	ISO 3449 Level II ISO 3449 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010 – 2019 ISO 5010 – 2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	340 in 8625 mm
Turning Dimensions - Clearance Radius	356 in 9082 mm
Turning Dimensions - Inside Radius	174 in 4413 mm
Turning Dimensions - Aisle Width	233 in 5917 mm
Note	Dimensions are for machines equipped with 29.5R25 tires. Dimensions are for machines equipped with 29.5R25 tires.

Steering

Lock to Lock

4.8 seconds @ 60 rpm 4.8 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavator: 390 - Passes	4 4
Hydraulic Excavator: 374 - Passes	5 5
Wheel Loader: 982 - Passes	4 4
Wheel Loader: 980 - Passes	4-5 4-5
Wheel Loader: 972 - Passes	4-5 4-5
Note	An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

745 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Mirrors: extensive arrangement for improved visibility

Seats:
– Fully adjustable, air suspension
– Padded trainer with lap belt

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Windshield wiper and washer, two speed (rear)

Adjustable air vents

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Air conditioning with R134A refrigerant

Sun visor

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure
– Seat belt warning
– Secondary steering failure
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Secondary steering – electro hydraulic

Window blinds

Windows opening side, tinted

Touch screen display incorporating the rearview camera video feed

Windshield wiper and washer, two speed, intermittent (front)

Two seat belts, operator's retractable

Tilt and telescopic steering wheel

Heater and defroster with variable speed fan

Combined gear selection and hoist control lever

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind seat storage
– Coat hook

CAT TECHNOLOGIES

Product Link: PL631 (satellite) or PL641 (cellular) dependent on location and licensing agreement

Cat Detect with Stability Assist

ELECTRICAL AND LIGHTING

Batteries (two) maintenance free

Electrical system: 24-volt, 5A 24- to 12-volt converter

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Remote starting receptacle (cables not included)

POWER TRAIN

Auto shift nine-speed forward and two reverse transmission

Cat C18 engine

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Three axle, six-wheel drive

SAFETY

Reverse alarm

Rearview camera

ROPS/FOPS cab

GUARDS

Rear window

Radiator

Crankcase

Axle

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Tires, six 29.5R25, radial

Vandalism protection: lockable caps for fuel tank and hydraulic oil tank

745 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Bare chassis (no body) standard wheel base

Bare chassis (no body) long wheel base

Body liners

Bluetooth radio stereo system

Cat Production Measurement payload monitoring system

Cold weather coolant –51° C (–60° F)

Cold weather start attachment

Engine block heater

Ether start

Exhaust heated body

Fast fuel fill

Fender extension

Flashing LED beacon

Four-point seat belt

Fuel additive – anti-waxing

Heated rearview motorized mirrors

Machine Security System (MSS)

Product Link Elite: PLE631 (satellite), PLE641 (cellular)

Roof mounted High Intensity Discharge (HID) work lights

Scissor tailgate

Seat (deluxe) heated/cooled, half leather, air adjustable lumbar and air adjustable bolsters

Sound suppression

875/65 R29 wide tires

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Assist

Equipment Management

Payload

Productivity

Cat Stability Assist for Articulated Trucks

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

Cat Inspect

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
Cat Product Link

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology
Cat Remote Flash

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology
VisionLink®

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Payload for Articulated Trucks

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

VisionLink® Productivity

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how 745 compares against frequently compared products.

Articulated Trucks

Selected

745

Engine Model: Cat® C18; Cat® C18
Rated Payload: 45.2 ton (US); 41 t
Heaped (SAE 2:1): 33.4 yd³; 25.5 m³

Articulated Trucks

740 GC

Engine Model: Cat® C15; Cat® C15
Rated Payload: 40 ton (US); 36.3 t
Heaped (SAE 2:1): 29.7 yd³; 22.7 m³

View Details

Articulated Trucks

735

Engine Model: Cat® C13; Cat® C13
Rated Payload: 35.3 ton (US); 32 t
Heaped (SAE 2:1): 26.2 yd³; 20 m³

View Details

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

360 View

745 Articulated Truck

Take the interactive virtual product tour to explore the great features and benefits of the 745

Start 745 Tour

Three Axle Articulated Trucks 745

Overview

Maximize Productivity

Benefits

UP TO 50% LESS OPERATOR INPUT

IMPROVED OPERATOR COMFORT

UNMATCHED SAFETY

Features At A Glance

Product Specifications for 745

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Body Plate

Body Hoist

Service Refill Capacities

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

745 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

CAT TECHNOLOGIES

ELECTRICAL AND LIGHTING

POWER TRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

745 Optional Equipment

NOTE

OPTIONAL EQUIPMENT

Product Specifications for 745

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Body Plate

Body Hoist

Service Refill Capacities

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

745 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

CAT TECHNOLOGIES

ELECTRICAL AND LIGHTING

POWER TRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

745 Optional Equipment

NOTE

OPTIONAL EQUIPMENT

Compatible Technology and Services

Cat Stability Assist for Articulated Trucks

Cat Inspect

Cat Product Link

Cat Remote Flash

VisionLink®

Cat Payload for Articulated Trucks

VisionLink® Productivity

See how 745 compares against frequently compared products.

Tools And Expert Help At Every Turn

Payment Calculator

Current Offers

Rental Options

Used Options

Find Dealer

assignment Product Brochures and More Are Ready to Download!

Media Gallery

Photos

360 View

Take the interactive virtual product tour to explore the great features and benefits of the 745

Product Brochures and More Are Ready to Download!