Three Axle Articulated Trucks 730

Key Specs

Engine Model: Cat® C13; Cat® C13

Rated Payload: 31 ton (US); 28 t

Heaped (SAE 2:1): 23 yd³; 17.5 m³

730
Change model

Overview

Efficient Productivity

The Cat® 730 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Benefits

UP TO 50% LESS OPERATOR INPUT

A uniquely combined hoist and transmission lever allows for easy operation which suits a wide range of operator experience

IMPROVED OPERATOR COMFORT

Quieter, more spacious cab with improved visibility helps operators work more productively throughout the day

UNMATCHED SAFETY

Safety features help increase operator confidence by providing a safer operation - prevention of cab and body roll-over and safer cab entry

Features At A Glance

Every Tier 2/Stage II equivalent Cat engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components.
Proven electronic, fuel, air and aftertreament components for peak performance and longevity.
Emissions control and improved fuel economy.
Advanced MEUI-C injector platforms deliver increased injection pressures and more precise fuel rates. These durable injectors enhance responsiveness while controlling soot.
Innovative air management optimizes airflow, power, efficiency and reliability.

The Cat CX31 six-speed forward, single-speed reverse transmission features Advanced Productivity Electronic Control Strategy (APECS) and Electronic Clutch Pressure Control (ECPC) which deliver smooth gear changes with improved acceleration and higher productivity.
Speed hold/limiting function allows the machine speed to be limited in 1 km/h or 1 mph steps to conform to site speed restrictions.
Gearshifts have been significantly improved to maintain direct drive lock-up, and eliminate dropping into converter drive. Reducing the use of torque converter drive helps maintain ground speed and gradeability.
Variable shift points used based on the operating conditions, which also aid in maintaining ground speed during gear changes on grades.
Critical gearshifts maintain direct drive lock-up, and eliminate dropping into converter drive. This maintains ground speed during shifts on grades.
The transmission automatically modifies shift points to best suit operating conditions and performance.
Retarding levels are automatically reduced on lesser grades in lower gears.
Large capacity torque converter, configured for off-highway applications, allows the higher engine power to be transmitted more efficiently to the lower power train.
The engine compression brake improves retarding response and increases retarding power.

Advanced automatic traction control (AATC) is a proactive application of the inter- and cross-axle differential locks is ‘on-the-go’ and fully automatic. The operator does not have to think about when and where to engage either diff lock. Sensors monitor the machine and wheel speeds, enabling instant response in high rolling resistance conditions. Operation is seamless and smooth, eliminating wheel slip for maximum traction and therefore productivity.
AATC reduces tire and driveline abuse, eliminating lost machine efficiencies caused by improper manual operation of the differential clutches and reducing the cost of premature tire replacement.
Automatic retarder control (ARC) makes use of the retarder easier for the operator to use. As with AATC, a number of machine operating aspects are monitored. If required, the engine compression brake is engaged automatically to control machine speed when descending a grade. The system can help towards eliminating engine overspeed, improving safe machine operation and reducing cycle times, yet still having the flexibility of manual control if needed.
With the assisted dumping system, tipping of the dump body can be done automatically with the new Assisted Hoisting Control. Flick the new body raise/lower switch and the machine will apply the service brakes, switch the transmission to neutral and raise the body at the required engine rpm. Lowering the dump body is done the same way, flick the switch and the machine will lower the body and place it in float. Two flicks, one up, one down.
Hill Assist reduces potential ‘roll-back’ on grades. If an operator stops the machine on a grade, when taking his foot off the service brake pedal, the machine will automatically hold the service brakes to prevent machine rolling backwards.
Waiting brake applies the service brakes when neutral gear is selected, allowing quick and easy control of the machine at the load or dump area.

The new cab is designed to make all aspects of machine operation as simple as possible for every operator. The controls and gauges are easy to read and straightforward to use, allowing the operator to focus on safe machine operation while maintaining productivity.
Unique to Cat articulated trucks, the combined hoist/transmission lever provides easy, intuitive control of gears and hoist functions. The new assisted hoist system gives improved control to the operator, allowing for faster cycle times and less control movements.
Offering both automatic and manual options, the system gives operators flexibility to choose their preferred method of control. When using the automatic system to tip a load, the machine neutralizes the transmission, applies the service brakes and hoists the body to maximum angle at the required engine rpm. When lowering the body this feature prevents a hard stop onto the frame, eliminating shock loads and potential damage. Automatic use can reduce operator interactions by up to 50 percent, compared to the previous model, depending on the site tipping procedure.
Also incorporated into the lever are waiting brake, transmission hold, machine speed limiter and parking brake selection. This gives operating a more automotive feel. No separate switch is now needed; you just push the lever into park.
The newly styled and updated dash puts all controls within easy reach of the operator. It features LED illuminated rocker switches for easy use in all operating conditions. The fit and finish delivers an automotive feel with the industrial strength you would expect from Caterpillar.
The updated touchscreen dash mounted display allows the operator to monitor and adjust various levels of machine performance and conditions, as well as machine warning categories. These include configuration settings, operator and machine totals, service information, various machine status parameters, machine payload information (when fitted), stability assist, and the video feed from the rearview camera.
Make and receive hands free calls via the optional Bluetooth equipped stereo with clearer quality due to the quieter cab and upgraded speakers.

The large open cab offers a comfortable working space for both the operator and an additional person (e.g. training purposes). The second seat is fully padded with a backrest and a wide, retractable seat belt for a secure and comfortable ride. Positioned adjacent to the operator, the seat gives the trainer a clear view of the instrument panel, controls and the road ahead.
A new large side storage box is heated or cooled by the HVAC system depending on operator preference. Twin cup holders and multiple storage spaces have also been introduced to help give operators an uncluttered workspace.
The new air suspension seat gives an increased range of adjustments over previous offerings including fore/aft isolation, which dramatically reduces horizontal vibrations and jolts. This provides a greater number of operators with the ability to tailor their seating position for a more comfortable working day.
The improved automatic climate control system gives you the option to maintain the temperature desired by the operator. A reduction to in-cab noise 72 dB (–4 dB from previous model) contributes to a more comfortable working environment for the operator, all day, every day.

All three axles have oscillating A-frames with lateral tie rods, controlling sideways movement of the axle and providing stability. In conjunction with suspension system, it allows the operator to travel at speed over rough terrain and softens impact loads on structures and components.
The front suspension has large bore, low-pressure cylinders are purpose designed for off-road applications and offer a soft, smooth ride for the operator. The front suspension oscillates ±6° to assist in providing a smooth ride. Suspension mounting points are integrated into the axle housing, increasing reliability.
The rear suspension is comprised of a walking beam and Caterpillar designed long life rear suspension mounts; the rear suspension system provides a reliable and stable ride for excellent travel over rough terrain and aids load retention.
Introduced for the first time on this model, the oil-immersed wet brake system is a multi-disc, multi-plate design. Enclosing the brakes prevents the ingress of contaminants. This protects the system, extends life, and reduces replacement costs while improving machine uptime.

The front frame design features a large box section and wide, stiff frame beams to handle torque loads. The divergent frame design decreases stress in the hitch area and optimizes suspension geometry. The frame design makes maximum use of robotic welding for increased durability.
The rear frame twin-box construction minimizes stress concentrations and provides low weight with long service life.
The three-point oscillating axle front suspension provides excellent ride quality. It also protects the truck from adverse road conditions by absorbing shock loads that would reach the frame.
The articulating hitch provides the truck with steering articulation, and the oscillation helps provide all-wheel ground contact in rough terrain.
All machines have a large target area dump body design to provide consistently high load carrying capacity. The diverging flow design gives clean material discharge, which maximizes production and avoids the waste of carry-back.
The output transfer gear (OTG) distributes drive to the tractor and trailer and includes a wet clutch differential lock for optimum traction in poor underfoot conditions.
Dual-circuit, all wheel braking system. The full power hydraulic system actuates enclosed, oil immersed, multi-disc, multi-plate brakes with independent front and rear circuits and accumulators.

Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. The system tracks location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink user interface so you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
Cat Production Measurement brings payload weighing to the cab to help optimize job site efficiency and productivity. Operators can view real-time load weights on the integrated display and know precisely when target is achieved, while cab-mounted external payload lights on all four corners signal the loader operator when to stop, reducing the risk of machine overloading. Operators can track daily productivity from the cab, with quick access to truck payload weights, loads and cycle counts, and daily totals; or remotely via LINK technologies.
Cat Detect with Stability Assist warns the operator if machine is approaching a pre-set angle during operation; when driving and tipping. If using the assisted hoist, the machine will stop hoisting the body and give an audible and visual warning. The system monitors angles of tractor, trailer and grade independently. This increases operator awareness of machine stability during operation. All tractor and/or trailer rollover events are logged and reported via VisionLink.

Specifications Standard Equipment Optional Equipment

Product Specifications for 730

Engine

Engine Model	Cat® C13 Cat® C13
Gross Power (SAE J1995)	375 hp 280 kW
Net Power (SAE J1349)	367 hp 274 kW
Engine Power (ISO 14396)	370 hp 276 kW
Bore	5.1 in 130 mm
Stroke	6.2 in 157 mm
Displacement	762.8 in³ 12.5 l
Note (1)	Advertised power is tested at 1,800 rpm. Advertised power is tested at 1,800 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)	Equivalent to U.S. EPA Tier 2/EU Stage II or meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA. Equivalent to U.S. EPA Tier 2/EU Stage II or meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA.
No Engine De-rating Below	12500 ft 3810 m
Peak Engine Torque Gross (SAE J1995)	1579 lbf·ft 2141 N·m
Peak Engine Torque Net (SAE J1349)	1554 lbf·ft 2107 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

31 ton (US) 28 t

Body Capacities

Heaped (SAE 2:1)	23 yd³ 17.5 m³
Struck	17.4 yd³ 13.3 m³
Tailgate Heaped SAE 2:1	24.6 yd³ 18.8 m³
Tailgate Struck	18.2 yd³ 13.9 m³

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons).

Transmission

Forward - 1	5 mile/h 8 km/h
Forward - 2	9 mile/h 15 km/h
Forward - 3	14 mile/h 22 km/h
Forward - 4	21 mile/h 34 km/h
Forward - 5	29 mile/h 47 km/h
Forward - 6	34 mile/h 55 km/h
Reverse - 1	6 mile/h 9 km/h

Sound Levels

Interior Cab	72 dB(A) 72 dB(A)
Note (1)	The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)	Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty	33069 lb 15000 kg
Center Axle - Empty	10053 lb 4560 kg
Rear Axle - Empty	9568 lb 4340 kg
Total - Empty	52690 lb 23900 kg
Front Axle - Rated Load	7231 lb 3280 kg
Center Axle - Rated Load	27249 lb 12360 kg
Rear Axle - Rated Load	27249 lb 12360 kg
Total - Rated Load	61729 lb 28000 kg
Front Axle - Loaded	40300 lb 18280 kg
Center Axle - Loaded	37302 lb 16920 kg
Rear Axle - Loaded	36817 lb 16700 kg
Total - Loaded	114420 lb 51900 kg

Body Plate

Type

High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

Body Plate Thickness

Front Plate	0.28 in 7 mm
Base Plate	0.51 in 13 mm
Side Plates	0.43 in 11 mm

Service Refill Capacities

Fuel Tank	108.8 gal (US) 412 l
Cooling System	21.9 gal (US) 83 l
Hydraulic System	29.1 gal (US) 110 l
Engine Crankcase	10 gal (US) 38 l
Transmission	12.4 gal (US) 47 l
Final Drives/Differential	33 gal (US) 125 l
Output Transfer Gear Box	6.3 gal (US) 24 l

Body Hoist

Raise Time	12 s 12 s
Lower Time	8 s 8 s

Standards

Brakes	ISO 3450:2011 ISO 3450:2011
Cab - FOPS	ISO 3449:2005 Level II ISO 3449:2005 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010:2019 ISO 5010:2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	294 in 7470 mm
Turning Dimensions - Clearance Radius	318 in 8075 mm
Turning Dimensions - Inside Radius	153 in 3879 mm
Turning Dimensions - Aisle Width	210 in 5332 mm
Note	Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

Steering

Lock to Lock

4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavators: 349/352 - Passes	4-5 4-5
Hydraulic Excavators: 336 - Passes	5-6 5-6
Wheel Loaders: 972/972 XE - Passes	3-4 3-4
Wheel Loaders: 966/966 XE - Passes	4 4
Wheel Loader: 962 - Passes	4-5 4-5
Wheel Loader: 950 - Passes	5 5
Note	An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

730 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Heater and defroster with four-speed fan

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Combined gear selection and hoist control lever

Mirrors: exterior

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Windshield wiper and washer, two speed, intermittent (front)

Tilt and telescopic steering wheel

Touchscreen display incorporating the rearview camera video feed

Secondary steering – electro hydraulic

Sun visor

Windows opening both sides, tinted

Retractable belt: Operator seat and second seat

Adjustable air vents

Air conditioning

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

TECHNOLOGY

Cat® Detect with Stability Assist

Product Link Cellular PLE643

ELECTRICAL AND LIGHTING

Batteries (two) maintenance free

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators

Electrical system: 24-volt, 10A 24- to 12-volt converter

Remote starting receptacle (cables not included)

Main disconnect switch

POWERTRAIN

Cat C13 engine

Three axle, six-wheel drive

Retarder: engine compression brake

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Auto shift six-speed forward and single-speed reverse transmission

CX31 transmission

Dual circuit oil immersed, enclosed brakes – all wheels

SAFETY

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

GUARDS

Radiator

Crankcase

Rear window

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

Mud flaps: wheel arch and body mounted with transportation tiebacks

Tires, six 23.5R25, radial

Vandalism protection: lockable caps

S·O·S sampling valves

730 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Infrared glass – high ambient cab

Mirrors, heated motorized

Radio, Bluetooth® stereo system

Seat, heated/cooled

Operator seat belt, four-point

Window blinds

Windshield wiper and washer, two speed (rear)

TECHNOLOGY

Cat Payload

Machine Security System (MSS)

Product Link Dual PLE683

ELECTRICAL AND LIGHTING

Cold weather start attachment

Engine block heater

Ether start

Flashing LED beacon

Roof mounted LED work lights

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Bare chassis (no body) standard wheel base

Bare chassis (no body) long wheel base

Body liners

Exhaust heated body

Cold weather coolant –51° C (–60° F)

Fast fuel fill

Fuel additive – anti-waxing

Scissor tailgate

Sound suppression

Tires, six 750/65R25, radial

Wheel chocks

Product Specifications for 730

Download Print

Engine

Engine Model	Cat® C13 Cat® C13
Gross Power (SAE J1995)	375 hp 280 kW
Net Power (SAE J1349)	367 hp 274 kW
Engine Power (ISO 14396)	370 hp 276 kW
Bore	5.1 in 130 mm
Stroke	6.2 in 157 mm
Displacement	762.8 in³ 12.5 l
Note (1)	Advertised power is tested at 1,800 rpm. Advertised power is tested at 1,800 rpm.
Note (2)	Advertised power is tested per the specified standard in effect at the time of manufacture. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)	Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)	Equivalent to U.S. EPA Tier 2/EU Stage II or meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA. Equivalent to U.S. EPA Tier 2/EU Stage II or meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA.
No Engine De-rating Below	12500 ft 3810 m
Peak Engine Torque Gross (SAE J1995)	1579 lbf·ft 2141 N·m
Peak Engine Torque Net (SAE J1349)	1554 lbf·ft 2107 N·m
Peak Engine Torque Speed	1200 r/min 1200 r/min

Weights

Rated Payload

31 ton (US) 28 t

Body Capacities

Heaped (SAE 2:1)	23 yd³ 17.5 m³
Struck	17.4 yd³ 13.3 m³
Tailgate Heaped SAE 2:1	24.6 yd³ 18.8 m³
Tailgate Struck	18.2 yd³ 13.9 m³

Air Conditioning System

Air Conditioning

Transmission

Forward - 1	5 mile/h 8 km/h
Forward - 2	9 mile/h 15 km/h
Forward - 3	14 mile/h 22 km/h
Forward - 4	21 mile/h 34 km/h
Forward - 5	29 mile/h 47 km/h
Forward - 6	34 mile/h 55 km/h
Reverse - 1	6 mile/h 9 km/h

Sound Levels

Interior Cab	72 dB(A) 72 dB(A)
Note (1)	The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)	Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty	33069 lb 15000 kg
Center Axle - Empty	10053 lb 4560 kg
Rear Axle - Empty	9568 lb 4340 kg
Total - Empty	52690 lb 23900 kg
Front Axle - Rated Load	7231 lb 3280 kg
Center Axle - Rated Load	27249 lb 12360 kg
Rear Axle - Rated Load	27249 lb 12360 kg
Total - Rated Load	61729 lb 28000 kg
Front Axle - Loaded	40300 lb 18280 kg
Center Axle - Loaded	37302 lb 16920 kg
Rear Axle - Loaded	36817 lb 16700 kg
Total - Loaded	114420 lb 51900 kg

Body Plate

Type

High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

Body Plate Thickness

Front Plate	0.28 in 7 mm
Base Plate	0.51 in 13 mm
Side Plates	0.43 in 11 mm

Service Refill Capacities

Fuel Tank	108.8 gal (US) 412 l
Cooling System	21.9 gal (US) 83 l
Hydraulic System	29.1 gal (US) 110 l
Engine Crankcase	10 gal (US) 38 l
Transmission	12.4 gal (US) 47 l
Final Drives/Differential	33 gal (US) 125 l
Output Transfer Gear Box	6.3 gal (US) 24 l

Body Hoist

Raise Time	12 s 12 s
Lower Time	8 s 8 s

Standards

Brakes	ISO 3450:2011 ISO 3450:2011
Cab - FOPS	ISO 3449:2005 Level II ISO 3449:2005 Level II
Cab - ROPS	ISO 3471 – 2008 ISO 3471 – 2008
Steering	ISO 5010:2019 ISO 5010:2019

Turning Circle

Turning Dimensions - Steer Angle - Left/Right	45° 45°
Turning Dimensions - SAE Turning Radius	294 in 7470 mm
Turning Dimensions - Clearance Radius	318 in 8075 mm
Turning Dimensions - Inside Radius	153 in 3879 mm
Turning Dimensions - Aisle Width	210 in 5332 mm
Note	Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

Steering

Lock to Lock

4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching

Hydraulic Excavators: 349/352 - Passes	4-5 4-5
Hydraulic Excavators: 336 - Passes	5-6 5-6
Wheel Loaders: 972/972 XE - Passes	3-4 3-4
Wheel Loaders: 966/966 XE - Passes	4 4
Wheel Loader: 962 - Passes	4-5 4-5
Wheel Loader: 950 - Passes	5 5
Note	An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

730 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Heater and defroster with four-speed fan

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Combined gear selection and hoist control lever

Mirrors: exterior

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Windshield wiper and washer, two speed, intermittent (front)

Tilt and telescopic steering wheel

Touchscreen display incorporating the rearview camera video feed

Secondary steering – electro hydraulic

Sun visor

Windows opening both sides, tinted

Retractable belt: Operator seat and second seat

Adjustable air vents

Air conditioning

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

TECHNOLOGY

Cat® Detect with Stability Assist

Product Link Cellular PLE643

ELECTRICAL AND LIGHTING

Batteries (two) maintenance free

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators

Electrical system: 24-volt, 10A 24- to 12-volt converter

Remote starting receptacle (cables not included)

Main disconnect switch

POWERTRAIN

Cat C13 engine

Three axle, six-wheel drive

Retarder: engine compression brake

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Auto shift six-speed forward and single-speed reverse transmission

CX31 transmission

Dual circuit oil immersed, enclosed brakes – all wheels

SAFETY

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

GUARDS

Radiator

Crankcase

Rear window

Front dump body spill guard, integral part of fabricated body

OTHER STANDARD EQUIPMENT

Mud flaps: wheel arch and body mounted with transportation tiebacks

Tires, six 23.5R25, radial

Vandalism protection: lockable caps

S·O·S sampling valves

730 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Infrared glass – high ambient cab

Mirrors, heated motorized

Radio, Bluetooth® stereo system

Seat, heated/cooled

Operator seat belt, four-point

Window blinds

Windshield wiper and washer, two speed (rear)

TECHNOLOGY

Cat Payload

Machine Security System (MSS)

Product Link Dual PLE683

ELECTRICAL AND LIGHTING

Cold weather start attachment

Engine block heater

Ether start

Flashing LED beacon

Roof mounted LED work lights

OPTIONAL EQUIPMENT

Auto lube installation for automatic greasing of bearings

Bare chassis (no body) standard wheel base

Bare chassis (no body) long wheel base

Body liners

Exhaust heated body

Cold weather coolant –51° C (–60° F)

Fast fuel fill

Fuel additive – anti-waxing

Scissor tailgate

Sound suppression

Tires, six 750/65R25, radial

Wheel chocks

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Assist

Equipment Management

Payload

Productivity

Cat Stability Assist for Articulated Trucks

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Stability Assist for Articulated Trucks increases awareness of machine stability during operation by warning operator if machine is approaching an un-safe angle, ultimately resulting in machine safety and uptime.

Explore Technology

Cat Inspect

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
Cat Product Link

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology
Cat Remote Flash

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology
VisionLink®

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Payload for Articulated Trucks

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Production Measurement provides real-time payload weighing to help operators optimize hauling potential and maximize productivity. Automated tracking helps site managers monitor material movement and efficiency metrics to manage production, improve jobsite efficiency, and lower costs.

Explore Technology

VisionLink® Productivity

Technology Cookies are required
To enable this feature, you must accept the use of targeting, functional, and performance cookies.
Cookie Settings

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how 730 compares against frequently compared products.

Articulated Trucks

Selected

730

Engine Model: Cat® C13; Cat® C13
Rated Payload: 31 ton (US); 28 t
Heaped (SAE 2:1): 23 yd³; 17.5 m³

Articulated Trucks

745

Engine Model: Cat® C18; Cat® C18
Rated Payload: 45.2 t; 41 t
Heaped (SAE 2:1): 33.4 yd³; 26 m³

View Details

Articulated Trucks

730 EJ

Engine Model: Cat® C13; Cat® C13
Rated Payload: 30 ton (US); 27.1 t
Heaped (SAE 2:1): 22.1 yd³; 16.9 m³

View Details

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

360 View

730 Articulated Truck

Take the interactive virtual product tour to explore the great features and benefits of the 730

Start 730 Tour

Three Axle Articulated Trucks 730

Overview

Efficient Productivity

Benefits

UP TO 50% LESS OPERATOR INPUT

IMPROVED OPERATOR COMFORT

UNMATCHED SAFETY

Features At A Glance

Product Specifications for 730

Engine

Weights

Body Capacities

Air Conditioning System

Transmission

Sound Levels

Operating Weights

Body Plate

Body Plate Thickness

Service Refill Capacities

Body Hoist

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

730 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

POWERTRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

730 Optional Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

OPTIONAL EQUIPMENT

Product Specifications for 730

Engine

Weights

Body Capacities

Air Conditioning System

Transmission

Sound Levels

Operating Weights

Body Plate

Body Plate Thickness

Service Refill Capacities

Body Hoist

Standards

Turning Circle

Steering

Optimal Loader/Truck Pass Matching

730 Standard Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

POWERTRAIN

SAFETY

GUARDS

OTHER STANDARD EQUIPMENT

730 Optional Equipment

NOTE

OPERATOR ENVIRONMENT

TECHNOLOGY

ELECTRICAL AND LIGHTING

OPTIONAL EQUIPMENT

Compatible Technology and Services

Cat Stability Assist for Articulated Trucks

Cat Inspect

Cat Product Link

Cat Remote Flash

VisionLink®

Cat Payload for Articulated Trucks

VisionLink® Productivity

See how 730 compares against frequently compared products.

assignment Product Brochures and More Are Ready to Download!

Product Brochures and More Are Ready to Download!