STEP 2: CLIMB ON BOARD CORRECTLY.

Once you’re confident your machine’s in good shape for the shift ahead, you’re ready to get in the cab. Did you know this is where most heavy equipment injuries occur? To avoid a fall, maintain three points of contact — two hands and a foot, or two feet and a hand — on the machine as you mount or dismount. And never try to get on or off equipment with tools or other items in your hands.

STEP 3: BUCKLE UP.

Now that you’re safely on board, it’s time to strap yourself in for the day’s work. As you buckle up, check the condition of the seat belt. Caterpillar recommends replacing seat belts at least every three years because they can degrade in tough applications (like waste). If yours is showing signs of wear, let your supervisor know immediately that it needs replacement. Then, confirm all systems, controls and the backup alarm are in good working order before you put the machine in motion.

STEP 4: NEVER STOP SCANNING.

During your shift, you’ve got plenty to focus on — but don’t get so caught up in the job you forget to take note of your surroundings. Operating equipment safely in a waste environment requires constant scanning of the work area. Be vigilant as you keep an eye out for airborne material, potential fire hazards and, most importantly, other machines and people in the vicinity. Also:

• Employ the three-point scan technique: Check your backup camera, check your mirrors, then check for yourself by turning and looking in the direction you plan to move.
  
  
• Look in reverse before you move in reverse. The natural tendency, especially with joystick control, is to hit reverse, then turn to look behind — but on average, about 3-5 seconds pass before you get your eyes behind you. Think about how far your machine can move in those few seconds.
  
  
• Don’t let cameras or technology make you complacent. Almost every piece of equipment today comes with a backup camera, and some offer cameras on the sides as well for a 360-degree view. Systems like Object Detection and Cat® Detect Personnel use radar to alert you when your machine gets too close to objects or people. They’re all great tools to improve safety, but they’re just that — tools. Never let them take the place of looking and double-checking for yourself.
  
  

STEP 5: END YOUR DAY THE WAY YOU STARTED.

When the shift’s over, everyone’s naturally in a hurry to get out of the machine and head home. Don’t let this be moment you let your guard down. Instead, slow down and make sure you always:

• Put your machine in neutral or park, engage the parking brake and lower the implement BEFORE you get out of the seat. (You should do this every time you get out of the seat during your shift, even if you don’t physically leave the machine.)
  
  
•  Maintain three points of contact as you dismount the machine.
  
  
• Do a quick visual scan of your machine once you’re on the ground. Look for any damage or other indicators that a problem may be imminent.
  
  
• Check your surroundings for other machines or vehicles on the move before you walk away.

For more tips on how to keep yourself and others safe at the landfill, MRF(material recovery facility) or transfer station, head to safety.cat.com. There you’ll find Toolbox Talks, start-up and shut-down checklists for various machines and other helpful resources. This waste-specific safety video is another great tool.