MD6310

Drills MD6310

Request A Price Find Dealer

Key Specs

Pull-Down Capacity
Up to 39 009 kg (86,000 lb)
Up to 39 009 kg (86,000 lb)
Hole Diameter
229-311 mm (9-12.25 in)
229-311 mm (9-12.25 in)
Engine
Cat® C32B
Cat® C32B

Overview

Precision Performance to Drive Costs Down and Profitability Up

The Cat® MD6310 is a powerful, flexible rotary blasthole drill that offers a wide variety of features and options designed to meet your site’s specific needs and challenges. A world-class cab helps keep operators safe and comfortable while increasing performance. And it’s infused with the latest technologies that increase productivity and allow for autonomous drilling—improving the efficiency of all downstream operations. ​Designed to drill holes from 229-311 mm (9-12.25 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes.

Benefits

Better Hole Quality

Achieve higher-quality collars and straighter holes that are more conducive to precision blasting

Better Penetration Rate

Improve your drilling efficiency and machine utilization with onboard Drill Assist tecnology

Low Total Cost of Ownership (TCO)

100% Cat components deliver reliable, long life and extended service intervals reduce downtime

Product Specifications for MD6310

Pull-Down Capacity Up to 39 009 kg (86,000 lb) Up to 39 009 kg (86,000 lb)
Hole Diameter 229-311 mm (9-12.25 in) 229-311 mm (9-12.25 in)
Engine Cat® C32B Cat® C32B
Bit Load Up to 42 149 kg (Up to 92,922 lb) Up to 42 149 kg (Up to 92,922 lb)
Body Length - Standard Cab 43.54 ft 13.27 m
Length - Mast Down - Extended Cab 83.33 ft 25.43 m
Length - Mast Down - Standard Cab 81.69 ft 24.9 m
Width - Front 17.68 ft 5.39 m
Body Length - Extended Cab 42.24 ft 13.79 m
Height - Mast Up 77.99 ft 23.77 m
Width - Rear 20.73 ft 6.32 m
13.7 m (44.9 ft) Mast - Hoist Speed 122.7 ft/min 37.4 m/min
17.5 m (57.4 ft) Mast - Hoist Speed 122.7 ft/min 37.4 m/min
Emissions (Equivalent to Tier 2): Engine C32B @ 1,800 rpm C32B @ 1,800 rpm
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth Down to 74.6 m (Down to 244.9 ft) Down to 74.6 m (Down to 244.9 ft)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth Down to 47.9 m (Down to 157.4 ft) Down to 47.9 m (Down to 157.4 ft)
17.5 m (57.4 ft) Mast - Pulldown Capacity Up to 39 009 kg (Up to 86,000 lb) Up to 39 009 kg (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth 57.4 ft 17.5 m
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) 203-311 mm (8-12.25 in)
Angle Drilling Vertical to 30° (in 5° increments) Vertical to 30° (in 5° increments)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) 203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast - Bit Load - Single Pass Up to 42 149 kg (Up to 92,922 lb) Up to 42 149 kg (Up to 92,922 lb)
13.7 m (44.9 ft) Mast - Hoist Capacity Up to 22 113 kg (Up to 48,750 lb) Up to 22 113 kg (Up to 48,750 lb)
Compressor - Rotary Drilling (1) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Compressor - Rotary Drilling (2) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
13.7 m (44.9 ft) Mast - Pulldown Capacity Up to 39 009 kg (Up to 86,000 lb) Up to 39 009 kg (Up to 86,000 lb)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth 44.9 ft 13.7 m
Emissions (U.S. EPA Tier 4 Final): Engine C32B @ 1,800 rpm C32B @ 1,800 rpm
Compressor - DTH Drilling 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
17.5 m (57.4 ft) Mast - Hoist Capacity Up to 22 113 kg (Up to 48,750 lb) Up to 22 113 kg (Up to 48,750 lb)
13.7 m (44.9 ft) Mast - Bit Load - Single Pass Up to 41 165 kg (Up to 90,753 lb) Up to 41 165 kg (Up to 90,753 lb)
Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 1007 hp 751 kW
Emissions (Equivalent to Tier 2): Power Rating ISO 14396 1031 hp 769 kW
Drawbar Pull 122971 lbf 547000 N
Track chain guards and guides Level two Level two
Travel Speed 1.5 mile/h 2.45 km/h
Lower rollers Fourteen (14) Fourteen (14)
Model Cat® 349E EL Excavator type Cat® 349E EL Excavator type
Carrier Rollers Three (3) Three (3)
Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) 29.5 in 750 mm
Components (10) In-deck mounted battery box In-deck mounted battery box
Components (9) Self-closing, gates secure egress ladder locations Self-closing, gates secure egress ladder locations
Components (12) Air hose retention devices Air hose retention devices
Components (2) Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Components (6) Guards for exhaust pipes and turbo lines Guards for exhaust pipes and turbo lines
Feature Approach angle of 14 degrees facilitates loading and unloading on a lowboy Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Components (7) Mast access ladder with mast grating (option) Mast access ladder with mast grating (option)
Components (4) Tram alarm is automatic and audible Tram alarm is automatic and audible
Components (11) Ground level keyed battery disconnect/starter lockout with remote jump start terminals Ground level keyed battery disconnect/starter lockout with remote jump start terminals
Components (1) Alloy drill deck covers, with storage provision Alloy drill deck covers, with storage provision
Components (5) Hinged protective guard for full front drill window Hinged protective guard for full front drill window
Components (3) Electric horn activated by push button in the cab Electric horn activated by push button in the cab
Components (8) Three egress points on deck areas in addition to main access Three egress points on deck areas in addition to main access
Components (10) Filter indicators for hydraulic, compressor and engine Filter indicators for hydraulic, compressor and engine
Components (14) ECM controlled proportional fan speed control system ECM controlled proportional fan speed control system
Components (23) Data logging of machine health with warnings, and fault code records; export capability Data logging of machine health with warnings, and fault code records; export capability
Components (20) Cabin pressure manometer with indicator (option) Cabin pressure manometer with indicator (option)
Components (3) Rotation torque control Rotation torque control
Components (12) Dust suppression control Dust suppression control
Components (17) Tram interlock, mast up and locked or down and parked Tram interlock, mast up and locked or down and parked
Components (1) All electric controls for drilling, tramming, leveling plus auxiliary functions All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (22) Prewired for Terrain and autonomous operation Prewired for Terrain and autonomous operation
Components (8) Delayed engine shut down Delayed engine shut down
Components (19) Cab environment controls (AC, filter, heat, fan speeds) Cab environment controls (AC, filter, heat, fan speeds)
Components (7) Drill performance and display system Drill performance and display system
Components (13) Mast lock indicator Mast lock indicator
Components (6) Drill depth meter Drill depth meter
Components (2) Electronic compressor control Electronic compressor control
Components (4) Virtual rotary head travel stops and interlocks Virtual rotary head travel stops and interlocks
Components (11) Jack pressure sensors in the display Jack pressure sensors in the display
Components (5) Pipe positioner engaged/disengaged indicator Pipe positioner engaged/disengaged indicator
Components (18) Tram interlock, jacks retracted Tram interlock, jacks retracted
Components (16) Tram interlock, pipe in hole Tram interlock, pipe in hole
Components (21) Dust curtain lifting system – auto hydraulic raise front and rear (option) Dust curtain lifting system – auto hydraulic raise front and rear (option)
Components (15) Tram interlock, machine stability limits Tram interlock, machine stability limits
Components (9) Rotary head rpm gauge – (digital display in screen) Rotary head rpm gauge – (digital display in screen)
Body Length - Standard Cab 43.54 ft 13.27 m
Body Length - Extended Cab 42.24 ft 13.79 m
Width - Rear 20.74 ft 6.32 m
Length - Mast Down - Standard Cab 69.23 ft 21.1 m
Length - Mast Down - Extended Cab 70.87 ft 21.62 m
Height - Mast Up 65.39 ft 19.93 m
Width - Front 17.68 ft 5.39 m
Note (2) Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling
Features (12) Pipe catcher; manual or optional hydraulically actuated Pipe catcher; manual or optional hydraulically actuated
Features (4) Feed system accommodates multiple pipe diameters Feed system accommodates multiple pipe diameters
Note (1) Hydraulic, indexing pipe carousels accept various pipe diameters Hydraulic, indexing pipe carousels accept various pipe diameters
Features (13) Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)
Features (2) Pulldown/hoist system is a single cylinder Pulldown/hoist system is a single cylinder
Features (1) 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel
Features (9) Drill pipe positioner Drill pipe positioner
Features (10) Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)
Features (3) Auto tensioning of pull down and hoist cables Auto tensioning of pull down and hoist cables
Features (6) Sliding deck wrench assembly Sliding deck wrench assembly
Features (11) Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Features (15) Mast access ladder and grating (option) Mast access ladder and grating (option)
Features (5) Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters
Features (7) Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (14) Mast lanyard mounting provisions (option) Mast lanyard mounting provisions (option)
Features (8) Angle drilling 0-30°; in 5° increments Angle drilling 0-30°; in 5° increments
Components (4) Ether starting aid; ether bottle supplied locally Ether starting aid; ether bottle supplied locally
Components (2) Scheduled oil sampling (S∙O∙SSM) ports Scheduled oil sampling (S∙O∙SSM) ports
Components (1) Dual starter motors Dual starter motors
Components (3) Common air intake filters provide +500 hour service interval in normal operating conditions Common air intake filters provide +500 hour service interval in normal operating conditions
Package (1) Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Package (2) Standard – Fast Fill for fuel and water; Automatic Lubrication System Standard – Fast Fill for fuel and water; Automatic Lubrication System
Package (3) Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose
Water injection and dry dust collector (option) – Water tank capacity 1514 L (400 gal)
– 204 m³/min (7,200 cfm) dry dust collector
– Self-cleaning filters, with auto-eject dust chute
– Water tank capacity 1514 L (400 gal)
– 204 m³/min (7,200 cfm) dry dust collector
– Self-cleaning filters, with auto-eject dust chute
Water Injection - Standard – Water tank capacity 1514 L (400 gal) – Water tank capacity 1514 L (400 gal)
Choices (1) Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)
Choices (3) Static dust curtains, four sides boxed in (standard) Static dust curtains, four sides boxed in (standard)
High Volume Water Injection System - Not Compatible with Basic Service Package – Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices (2) Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)
Components (4) Top Sub, or Shock sub and cross over adapter (option) Top Sub, or Shock sub and cross over adapter (option)
Components (3) Deck wrench, sliding Deck wrench, sliding
Components (5) Bit sub Bit sub
Components (1) Roller deck bushing Roller deck bushing
Components (6) Pipe wiper seal Pipe wiper seal
Components (2) Pipe positioner inserts Pipe positioner inserts
Rotary Drilling (2) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)
Receiver Tank Choice (1) Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE
Rotary Drilling (1) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
DTH Drilling - Includes Tool Lubrication and Hammer Storage 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)
Note With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption
– Both high and low pressure compressors contain this feature
With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption
– Both high and low pressure compressors contain this feature
Receiver Tank Choice (2) High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE
Choice Electronic compressor control and regulation with purged air lines Electronic compressor control and regulation with purged air lines
Components (5) Four (4) lift lugs, for use with cables or chains Four (4) lift lugs, for use with cables or chains
Components (7) Bit storage box in-deck with hinged cover (option) Bit storage box in-deck with hinged cover (option)
Components (6) Walkway around cab to drill deck (option) Walkway around cab to drill deck (option)
Features (2) Slip resistant surface Slip resistant surface
Features (3) Fuel tank capacity 1609 L (425 gal) Fuel tank capacity 1609 L (425 gal)
Components (1) Stationary rear deck; for vertical and angle drilling Stationary rear deck; for vertical and angle drilling
Components (2) Four leveling jacks to provide leveling on a 7° bench (any orientation) Four leveling jacks to provide leveling on a 7° bench (any orientation)
Features (6) Three egress points on deck areas in addition to main access Three egress points on deck areas in addition to main access
Components (10) Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)
Features (7) Sturdy guardrails, toe guards, self closing gates Sturdy guardrails, toe guards, self closing gates
Components (4) Heavy duty tow hooks (front end) Heavy duty tow hooks (front end)
Components (3) Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)
Components (8) DTH hammer storage on drill deck with high pressure configuration (option) DTH hammer storage on drill deck with high pressure configuration (option)
Features (4) Fuel capacity expansion for additional +1609 L (425 gal) Fuel capacity expansion for additional +1609 L (425 gal)
Features (5) Bolt-on platform for cold weather generator or fire suppression bottles (option) Bolt-on platform for cold weather generator or fire suppression bottles (option)
Components (9) Hydraulically operated viewing hatch in drill deck with spotlight (option) Hydraulically operated viewing hatch in drill deck with spotlight (option)
Features (1) Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (2) Separate engine cooling module Separate engine cooling module
Components (1) Coolers with easy cleaning access Coolers with easy cleaning access
Components (3) Replaceable cooler core sections Replaceable cooler core sections
Components (4) Automatic variable speed fan control Automatic variable speed fan control
Features Functional in ambient temperature of 52° C (125° F) Functional in ambient temperature of 52° C (125° F)
Components (6) Wiring for third party interface Wiring for third party interface
Components (3) Drill assist (single or multipass auto drill) (options) Drill assist (single or multipass auto drill) (options)
Components (5) Optional Command for Drilling enables each operator to manage more than one machine Optional Command for Drilling enables each operator to manage more than one machine
Type Autonomy ready Autonomy ready
Components (2) Auto level, auto retract, auto mast Auto level, auto retract, auto mast
Components (1) Drill depth indicator and interlocks Drill depth indicator and interlocks
Optional Cat Terrain for Drills - Mining System Interface – Production
– Navigation
– Production
– Navigation
Components (4) Product Link Elite (hardware from factory, subscription package via dealer) Product Link Elite (hardware from factory, subscription package via dealer)
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) 8 in 203 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH 7 in 178 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH 7.625 in 194 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) 8.625 in 219 mm
7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary 9.25 in 235 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) 8.625 in 219 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) 8 in 203 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH 7 in 178 mm
12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH 7.625 in 194 mm
Note Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters
Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters
Climate Level 2 Arctic Fluids and Lubricants Rated down to –18° C (–0.4° F) temperatures Rated down to –18° C (–0.4° F) temperatures
Climate Level 1 Standard Fluids and Lubricants (1) Rated down to –1° C (30° F) temperatures Rated down to –1° C (30° F) temperatures
Climate Level 1 Standard Fluids and Lubricants (2) Withstands high heat to 52° C (125° F) Withstands high heat to 52° C (125° F)
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) Rated down to –40° C (–40° F) temperatures Rated down to –40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks
Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank
Cable Diameter 0.5 in 13 mm
Winch Reach - Past The Drill Deck 20 ft 6.1 m
Capacity Rating 4000 lb 1814 kg
Note Variable speed control Variable speed control
Lighting – LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area lights and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens
– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)
– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)
– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area lights and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens
– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)
– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)
Components (7) Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port
Components (4) Drill performance touchscreen display Drill performance touchscreen display
Components (3) Cab perimeter walkway available for both cab sizes Cab perimeter walkway available for both cab sizes
Components (1) Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station
Components (13) Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Components (9) Power convertor 24V to 12V Power convertor 24V to 12V
Components (2) Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave
HVAC – Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window
– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller window
Components (6) Two swing-out hinged doors with windows and Cat keyed locks Two swing-out hinged doors with windows and Cat keyed locks
Components (14) Trainer’s seat that folds away and has retractable seat belt (optional) Trainer’s seat that folds away and has retractable seat belt (optional)
Cameras – Mounted on the front and left sides to provide 360° view from operator's seat
– Camera on the mast to view pipe carousel/top drive operation
– Mounted on the front and left sides to provide 360° view from operator's seat
– Camera on the mast to view pipe carousel/top drive operation
Components (5) Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Components (10) Radio-ready for communication and entertainment radio Radio-ready for communication and entertainment radio
Cab - Premium – Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Additional in-cab storage box
– Additional windshield wipers on front and rear windows
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
Components (11) Cab roof access ladder (option) Cab roof access ladder (option)
Cab - Standard – Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shades (option)
– Foldaway trainer’s seat (option)
– Removable floor mat
Components (8) Additional display screen for cc cameras; color, high-definition 254 mm (10 in) Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
Components (12) Literature holder Literature holder
Components (4) Virtual rotary head travel stops and interlocks Virtual rotary head travel stops and interlocks
Components (3) Rotary torque control Rotary torque control
Components (2) Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components (1) Spindle with 168 mm (6.625 in) API regular thread and splined collar Spindle with 168 mm (6.625 in) API regular thread and splined collar
Components (2) One (1) auxiliary circuit pump – 110 cc (piston, load sensing) One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3) Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)
Components (1) Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)
Components (4) Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
Components (5) Scheduled Oil Sampling (S∙O∙S) ports Scheduled Oil Sampling (S∙O∙S) ports
Components (1) Two piece bushing Two piece bushing
Components (6) Pipe wiper seal Pipe wiper seal
Components (4) Shock sub and top sub adapter Shock sub and top sub adapter
Components (5) Cross over hammer adapter Cross over hammer adapter
Components (3) Deck wrench, sliding Deck wrench, sliding
Components (2) Pipe positioner inserts Pipe positioner inserts
Choice (1) Fixed access ladder to the cab area Fixed access ladder to the cab area
Choice (2) Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down
Choice (3) Cab perimeter walkway available with either choice Cab perimeter walkway available with either choice
Mast Accessories Hydraulic (2) One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Mast Accessories Hydraulic (1) One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
Angle Drilling Included with either mast Included with either mast
Mast Accessories Manual, 17.5 m (57.4 ft) Mast Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket
Mast Accessories Manual, 13.7 m (44.9 ft) Mast One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters 194 mm (7.625 in), 219 mm (8.625 in) 194 mm (7.625 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter 9.25 in 235 mm
17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
Note 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters
13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
  • Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters
Option Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter
Lifting Bails (Available on Request) – 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
Working Weight Range - Minimum/Maximum 75 800/97 000 kg (167,110/213,848 lb) 75 800/97 000 kg (167,110/213,848 lb)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) 235 mm (9.25 in) 235 mm (9.25 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) 178-219 mm (7.0-8.625 in) 178-219 mm (7.0-8.625 in)
Working Weight Range - Minimum/Maximum 75 500/97 500 kg (166,449/214,950 lb) 75 500/97 500 kg (166,449/214,950 lb)

MD6310 Optional Equipment

FRAME

  • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages

MAST

  • Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
  • Rotary tool lubrication, 113.5 L (30 gal) oil injection system
  • Mast access ladder, mast grating and lanyard posts

OPERATOR ENVIRONMENT

  • Trainer seat that folds away
  • Window shades
  • Cabin pressure manometer gauge
  • Cab roof access ladder

SERVICE TOOL OPTIONS

  • Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
  • Lifting bails (available on request; required for commissioning)
    – 114 mm (4.5 in) API reg thread
    – 140 mm (5.5 in) API reg thread
    – 168 mm (6.625 in) for top sub/shock sub API reg thread
    – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
    – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread

TECHNOLOGY PRODUCTS

  • Product Link Elite – cellular
  • Product Link Elite – Dual (cellular and satellite)
  • Terrain for Drilling

GROUND ENGAGING TOOLS

  • Drill bits, rotary tricone
    – 228 mm (9.0 in), OPT 1, (S3)
    – 228 mm (9.0 in), OPT 2, (M2)
    – 228 mm (9.0 in), OPT 3, (H1)
    – 251 mm (9.875 in), OPT 1, (M1)
    – 251 mm (9.875 in), OPT 2, (M3)
    – 251 mm (9.875 in), OPT 3, (H1)
    – 270 mm (10.625 in), OPT 1, (S3)
    – 270 mm (10.625 in), OPT 2, (M3)
    – 270 mm (10.625 in), OPT 3, (H1)
    – 311 mm (12.25 in), OPT 1, (M1)
    – 311 mm (12.25 in), OPT 2, (M3)
    – 311 mm (12.25 in), OPT 3, (H1)

DUST SUPPRESSION

  • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
  • Tram off spray system

DRILL PIPE

  • 12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
    – DTH – 178 mm (7 in)
    – Rotary/DTH – 194 mm (7.625 in)
    – Rotary – 203 mm (8 in)
    – Rotary – 219 mm (8.625 in)
  • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
    – DTH – 178 mm (7 in)
    – Rotary/DTH – 194 mm (7.625 in)
    – Rotary – 203 mm (8 in)
    – Rotary – 219 mm (8.625 in)
    – Rotary – 235 mm (9.25 in) Carousel accepts quantity of two
  • 9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
    – Accepts 194 mm (7.625 in) pipe
  • Contact factory for additional pipe diameters

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

  • Cat Command for Drilling

    Cat® MineStar™ Command for drilling delivers cost-effective, high precision drilling through automation — which will ultimately reduce operating costs, increase safety and improve productivity. Command for drilling ensures that every hole is accurately placed, drilled to the proper elevation and angle, and able to stand up until blasting. A range of capabilities lets site managers configure and automate the drilling system to their budgets and needs. From predrill planning to blasting, Command impacts the bottom line all the way through the crusher and mill.

1 - 8 of 9 Items items
Previous Next

Cat® MineStar™ Command for drilling delivers cost-effective, high precision drilling through automation — which will ultimately reduce operating costs, increase safety and improve productivity. Command for drilling ensures that every hole is accurately placed, drilled to the proper elevation and angle, and able to stand up until blasting. A range of capabilities lets site managers configure and automate the drilling system to their budgets and needs. From predrill planning to blasting, Command impacts the bottom line all the way through the crusher and mill.

Explore Technology
  • Cat MineStar Edge

    Cat® MineStar Edge™ is a technology platform that delivers more connected, integrated, scalable and intuitive products that extend further up and down the value chain. Edge makes it possible for you to use proven MineStar technologies across your entire mining organization and creates an operational ecosystem that provides visibility to every aspect of your operation. Edge delivers near-real-time access to data that was up to 98% accurate and enables you to make changes in-shift while already knowing the impact those changes will have further down the value chain?

1 - 8 of 9 Items items
Previous Next

Cat® MineStar Edge™ is a technology platform that delivers more connected, integrated, scalable and intuitive products that extend further up and down the value chain. Edge makes it possible for you to use proven MineStar technologies across your entire mining organization and creates an operational ecosystem that provides visibility to every aspect of your operation. Edge delivers near-real-time access to data that was up to 98% accurate and enables you to make changes in-shift while already knowing the impact those changes will have further down the value chain?

Explore Technology
  • Cat Fleet for Surface

    Cat® MineStar Fleet is the single best source for fleet management information. An integrated fleet monitoring and management system, it can be used with any machine or system to measure, manage and maximize every facet of an operation, no matter the size or type. Fleet provides real-time visibility to cycle time, payload and other key operational parameters. It monitors machine locations and material movement and provides alerts of misroutes to ensure material is moved to the proper location.

1 - 8 of 9 Items items
Previous Next

Cat® MineStar Fleet is the single best source for fleet management information. An integrated fleet monitoring and management system, it can be used with any machine or system to measure, manage and maximize every facet of an operation, no matter the size or type. Fleet provides real-time visibility to cycle time, payload and other key operational parameters. It monitors machine locations and material movement and provides alerts of misroutes to ensure material is moved to the proper location.

Explore Technology
  • Cat Health

    Through regular monitoring of machine conditions, mines can adopt a more proactive approach to maintenance and repair. Equipment health data is a key contributor to that approach. Data helps mines identify equipment problems long before failure.

    Accessing the right data at the right time is critical to improving operational intelligence and machine predictive analysis. Cat® MineStar™ Health helps you meet that need by connecting you to your machines and delivering that important information. The MineStar Health portfolio set consists of Connectivity Enablers that collect, convert and transmit equipment data; and Applications that visualize, analyze and report health equipment data.

1 - 8 of 9 Items items
Previous Next

Through regular monitoring of machine conditions, mines can adopt a more proactive approach to maintenance and repair. Equipment health data is a key contributor to that approach. Data helps mines identify equipment problems long before failure.

Accessing the right data at the right time is critical to improving operational intelligence and machine predictive analysis. Cat® MineStar™ Health helps you meet that need by connecting you to your machines and delivering that important information. The MineStar Health portfolio set consists of Connectivity Enablers that collect, convert and transmit equipment data; and Applications that visualize, analyze and report health equipment data.

Explore Technology
  • Cat Terrain for Drilling

    Effective mining starts with accurate drilling. That means drilling every hole precisely to plan, at the proper angle and the correct depth. Cat® MineStar™ Terrain for drilling provides precision guidance that helps operators complete patterns accurately and productively. It pays other dividends, as well, by improving safety, reducing costs and recording data about drilled stratification to aid in planning blasts and improving fragmentation. And it works with all brands of drills and communicates seamlessly with MineStar and other mine management systems.

1 - 8 of 9 Items items
Previous Next

Effective mining starts with accurate drilling. That means drilling every hole precisely to plan, at the proper angle and the correct depth. Cat® MineStar™ Terrain for drilling provides precision guidance that helps operators complete patterns accurately and productively. It pays other dividends, as well, by improving safety, reducing costs and recording data about drilled stratification to aid in planning blasts and improving fragmentation. And it works with all brands of drills and communicates seamlessly with MineStar and other mine management systems.

Explore Technology

Media Gallery

MD6310 Rotary Blasthole Drill

MD6310 Rotary Blasthole Drill

MD6310 Rotary Blasthole Drill

MD6310 Rotary Blasthole Drill

MD6310 Rotary Blasthole Drill

MD6310 Rotary Blasthole Drill
MD6310 Rotary Blasthole Drill
MD6310 Rotary Blasthole Drill
MD6310 Rotary Blasthole Drill
MD6310 Rotary Blasthole Drill

MD6310 Next-Gen Overview

MD6310 Walkaround

MD6310 Launch Video

Thiess Review of Terrain for Drilling on MD6310

Thiess Review of MD6310 Drill

MD6310 Next-Gen Overview
MD6310 Walkaround
MD6310 Launch Video
Thiess Review of Terrain for Drilling on MD6310
Thiess Review of MD6310 Drill

360 View
360 View

Take the interactive virtual product tour to explore the great features and benefits of the MD6310

Start MD6310 Tour
close

See how MD6310 compares against frequently compared products.