725C2 Bare Chassis

Ganesh_Folder 725C2 Bare Chassis

Minta Penawaran Temukan Dealer

Spesifikasi Utama

Standard Wheel Base
156.7 in
3979 mm
Long Wheel Base
215.2 in
5465 mm
Rated Payload
26 t
23.6 t

Ikhtisar

The 725C2 Bare Chassis is a strong, durable Cat C9.3 ACERT engine platform with U.S. EPA Tier 4 Final/EU Stage IV engine emission solution. Advanced Productivity Electronics Control Strategy (APECS) delivers a smooth shifting transmission, improving acceleration with higher productivity.

Keunggulan

Up to 50%

Cat certified parts with additionalwarranty

Up to 25%

Less maintenaionace

Up to 20%

Less Fuel using lower engine speed and larger hydraulic pump.

Spesifikasi Produk untuk 725C2 Bare Chassis

Standard Wheel Base 156.7 in 3979 mm
Long Wheel Base 215.2 in 5465 mm
Engine Model Cat C13 ACERT Cat C13 ACERT
Gross Power - SAE J1995 320 HP 239 kW
Net Power - SAE J1349 314 HP 234 kW
Bore 5.1 in 129.54 mm
Stroke 6.2 in 157.48 mm
Displacement 762.8 in³ 12.5 l
No Engine De-rating Required Below 7500 ft 2286 m
Peak Engine Torque Net (ISO 14396) 1262 lb/ft 1711 N·m
Peak Engine Torque Gross (SAE J1995) 1275 lb/ft 1729 N·m
Peak Engine Torque Speed 1200 r/min 1200 r/min
Net Power - ISO 14396 316 HP 236 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3 ACERT™ Cat® C9.3 ACERT™
Rated Payload 26 t 23.6 t
Forward - 1 5 mile/h 8 km/h
Forward - 2 9 mile/h 15 km/h
Forward - 3 14 mile/h 22 km/h
Forward - 4 21 mile/h 34 km/h
Forward - 5 29 mile/h 47 km/h
Forward - 6 36 mile/h 58 km/h
Reverse - 1 6 mile/h 9 km/h
Interior Cab 76 dB(A) 76 dB(A)
Fuel Tank 108.8 gal (US) 412 l
Cooling System 21.9 gal (US) 83 l
Hydraulic System 29.1 gal (US) 110 l
Engine Crankcase 10 gal (US) 38 l
Transmission 12.4 gal (US) 47 l
Final Drives/Differential 33 gal (US) 125 l
Output Transfer Gear Box 6.3 gal (US) 24 l
DEF Tank (ISO 2224-1) 5.2 gal (US) 19.6 l
Lock to Lock 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm
Brakes ISO 3450 - 2011 ISO 3450 - 2011
Cab - FOPS ISO 3449 Level II - 2005 ISO 3449 Level II - 2005
Cab - ROPS ISO 3471 - 2008 ISO 3471 - 2008
Steering ISO 5010 - 2007 ISO 5010 - 2007
Turning Dimensions - Clearance Radius 318 in 8075 mm
Turning Dimensions - Inside Radius 153 in 3879 mm
Turning Dimensions - SAE Turning Radius 294 in 7470 mm
Turning Dimensions - Steer Angle - Left/Right 45 ° 45 °
Turning Dimensions - Aisle Width 210 in 5332 mm
Note Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.

725C2 Bare Chassis Perlengkapan Standar

For bare chassis standard and optional equipment, please reference the 725C2 Articulated Truck.
For more information on 725C2 Bare Chassis options, please contact Caterpillar OEM Solutions at oemsolutions@cat.com.

Peralatan dan Bantuan Pakar Setiap Saat

Brosur Produk dan Lainnya Siap Di-download!