Power Rating
| Maximum Power | 690 hp 515 kW |
| Maximum Torque | 2360 lb-ft @ 1300 rpm 3200 Nm @ 1300 rpm |
| Rated Speed | 1800-2100 rpm 1800-2100 rpm |
| Minimum Power | 456 hp 340 kW |
Industrial Diesel Engines C13D
C13D
Request A Price Find DealerKey Specs
- Maximum Power
- 690 hp
- 515 kW
- Maximum Torque
- 2360 lb-ft @ 1300 rpm
- 3200 Nm @ 1300 rpm
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Overview
The Cat?� C13D is a rugged and power-dense engine made for machines that continuously tackle tough jobs in a number of industries including mining, construction, materials handling, aircraft ground support and more. With a variable turbocharged, common rail direct injection industrial engine that meets U.S. EPA Tier 4 Final, EU Stage V and other equivalent emissions standards, you get the power you need while also helping you save valuable time and costs on the job.
Features At A Glance
High Power Density
With power density as high as 53.5 hp/L (40 kW/L), and a power-to-weight ratio as high as 0.45 kW/kg (0.27 hp/lb), you can look to downsize the displacement and weight of the engine that’s currently powering your application.
Fuel Efficiency
Our electronically optimized engines are precisely engineered with up to 20% less fuel consumption than their predecessors so you can save costs at the pump. In fact, our advanced controls algorithm optimizes fuel consumption to as low as 185 g/kW-hr and can match operating cycles of a wide range of equipment and applications while maintaining low operating costs – even over various altitude and ambient conditions.The C13D engine also offers up to 3dB quieter operation than its predecessors.
Building on sustainability, the C13D is compatible with B20 biofuels and HVO, helping to save you cost, reduce lifecycle CO2 emissions, while improving performance.
Ideal Applications
Industrial, agricultural and construction applications such as:• compressors
• trenchers
• chippers
• grinders
• irrigation equipment
• bore rigs
• drill rigs
• pumps
• hydraulic power units.
The C13D has high ambient and altitude and low cold start capability so is suitable for use in applications where there are harsher climates.
Low-cost Maintenance
The C13D offers extended service intervals: 1,000 hour oil and fuel change intervals and 5,000 hour diesel particulate filter (DPF) ash service intervals. Therefore,you’ll spend less time and costs maintaining your machine andless time servicing your engine and more time focusing on your work.
Cat Dealer Product Support
No matter where in the world the Cat C13D is, it’s backed by the reliable and extensive support the Cat dealer network offers across 192 countries. And for even more peace of mind, your Cat engine comes under warranty. See your Cat dealer for details.
Safety
At Caterpillar, safety is a priority. It's why we put all our engines through rigorous rounds of testing and validation. We make our engines reliable, so operators can focus on keeping their work site safe, secure and in service.Product Specifications for C13D
Emission Standards
| Emissions | EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV |
General
| Engine Configuration | In-Line 6 In-Line 6 |
| Bore | 5.1 in 130 mm |
| Stroke | 6.4 in 162 mm |
| Displacement | 787.2 in³ 12.9 l |
| Compression Ratio | 18:1 18:1 |
| Aspiration | Turbocharged-Aftercooled (TA) Turbocharged-Aftercooled (TA) |
| Combustion System | Direct Injection Direct Injection |
| Rotation from Flywheel End | Counterclockwise Counterclockwise |
| Aftertreatment | DOC+DPF+SCR DOC+DPF+SCR |
Engine Dimensions - Approximate
| Length | 54 in 1381 mm |
| Width | 38 in 969 mm |
| Height | 50 in 1273 mm |
| Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 2544 lb 1154 kg |
C13D Standard Equipment
Air Inlet System
- Variable turbocharger
- Air-to-Air Aftercooled
- Front or rear exhaust configurations available
Control System
- Advanced controls - electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
Cooling System
- Fluids module, which includes: water pump, oil cooler, top-service cartridge oil filter (optional), dual coolant thermostats, and single oil thermostat
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Remote oil filter variant of the fluids module available
Flywheels and Flywheel Housing
- Multiple Flywheel Housing configurations, featuring a basic, standard and heavy duty PTO setup
- Standard SAE No. 1 flywheel housing with SAE No. 14 or 140 flywheels
Fuel System
- Common rail direct injection fuel system with zero-static leak injectors
- Fuel module, which includes: primary and secondary cartridge filters, and a manual or electric priming pump
- Remote fuel module available
- Fuel manifold which allows for outboard or rearward fuel return-to-tank plumbing, as well as coolant supply
- Oil-lubricated high pressure fuel and mechanical fuel transfer pump combination
Lube System
- No-service-needed passive open crankcase ventilation filtration system built into the valve cover (required for EU Stage V certification engines)
- No-mess service oil filter drainback feature built into fluids module
- Oil filler
- Oil level sensor
- Oil dipstick
- Gear-driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (OCV filter system required for EU Stage V certification engines)
Power Take Off (PTO)
- Up to 5 additional power take-offs: 2 rear facing (SAE B, C, or D), 2 forward-facing (SAE A or SAE B), and an additional low-mount forward-facing (SAE B)
General
- Caterpillar yellow paint, with optional colors available on request
- Vibration damper
- Lifting eyes
See how C13D compares against frequently compared products.
Industrial
C13D
C13D
Selected
- Maximum Power
- 690 hp
- 515 kW
- Maximum Torque
- 2360 lb-ft @ 1300 rpm
- 3200 Nm @ 1300 rpm
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Industrial
C13B
- Maximum Power
- 577 hp
- 430 kW
- Maximum Torque
- 1943 lb-ft @ 1400 rpm
- 2634 Nm @ 1400 rpm
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
Industrial
C15
- Maximum Power
- 580 hp
- 433 kW
- Maximum Torque
- 1958 lb-ft @ 1400 rpm
- 2655 Nm @ 1400 rpm
- Emissions
- U.S. EPA Tier 4 Final
- U.S. EPA Tier 4 Final
Use the comparison tool to compare detailed specs of Cat and competitor models.
Compare All Modelsassignment Product Brochures and More Are Ready to Download!
Caterpillar product brochures and other informational documents are available for your growing business.
Take the interactive virtual product tour to explore the great features and benefits of the C13D
Start C13D Tour
close