Wheel Excavators M315

Request A Price Find Dealer

Key Specs

Operating Weight Maximum: 34610 lb; 15700 kg

Maximum Travel Speed: 23 mile/h; 37 km/h

Engine Model: Cat C3.6; Cat C3.6

M315
Change model

Overview

Increase Production with Low Operating Costs

The Cat® M315 Wheeled Excavator provides top performance with up to 15 percent more swing torque and technology options to boost productivity. Save time and money with up to 10 percent savings in maintenance costs, longer service intervals, and daily ground level maintenance. The M315 gives you the power to work longer while putting money in your pocket.

Benefits

Enhanced Comfort

Operate with ease in cab comfort options of your choice and better visibility with 360° machine view.

Maximize Performance

Operate with ease in cab comfort options of your choice and better visibility with 360° machine view.

Up To 10% Lower Maintenance Costs

Reduced maintenance costs combined with 100 percent daily ground level maintenance, and shareable work tools increase uptime and keep costs down.

Features At A Glance

Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material--with a bucket and thumb combination or grapple and clamshell attachments--and get a real-time weight estimate without swinging.
New optional auxiliary relay powers on and turns off CB radios, beacon lights, and other attachments without you taking your hands off the joysticks.
Remote Flash and Remote Troubleshoot now standard.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07C

HIGH PERFORMANCE WITH LOWER FUEL CONSUMPTION

The Cat engine matches to your performance and production needs. The engine meets U.S. EPA Tier 3 and EU Stage IIIA emission standards.
Travel between sites easier with travel speeds up to 37 kph (23 mph).
From dirt to asphalt, the excavator matches your needs to get the job done in a timely, efficient manner.
The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise working requirements.
With up to 15 percent more swing torque, you can get the job done faster to move on to the next one. The dedicated swing pump provides consistent power for better multitasking capabilities.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
Don't let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52°C (125°F) and cold start capability of -18°C (0°F).

Boost Efficiency and Productivity with Integrated Cat Technologies

Boost productivity versus traditional grading withoptional Cat Grade with 2D system.
Optional Cat Payload on-board weighing system: Achieve precise load targets and increase loading efficiency with on-the-go weighing and real-time estimates of your payload without swinging.
Combine Payload with VisionLink® and remotely manage your production targets or take payload data with you. The monitorâ€™s USB port lets you download your results from one shift all the way up to 30 days of work so can manage your progress without needing an internet connection or VisionLink subscription.
Upgrade to optional Cat Grade with Advanced 2D: Create and edit grade designs with ease on a second high-resolution 254 mm (10 in) touchscreen monitor.
Upgrade to optional Cat Grade with 3D: Create and edit designs with ease and see the front linkage's full range of motion on a second high-resolution touchscreen monitor.
Optional 2D E-fence is integrated right out of the factoryto prevent the excavator from moving outside operator defined set points.
All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

Choose between Comfort and Deluxe cab options.
The Deluxe seat is heated and air adjustable.
Get in and out of the cab easier using the tip-up left console.
Feel more comfortable in the cab while you work with reduced cab vibrations from advanced viscous mounts.
Control the excavator comfortably with easy-to-reach controls.

Quickly check and service your machine with daily maintenance points accessible from ground level.
Check the engine oil level quickly and safely from the ground.
Save up to 10 percent in maintenance parts with the new, longer lasting filters.
Track your machine's filter life and maintenance intervals on the in-cab monitor.
Two levels of fuel filtration protect the engine from dirty diesel.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval - 50 percent longer than previous filter designs.
S•O•SSM ports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, bottle holder, and coat hook are also provided.
Bluetooth® integrated radio allows for seamless mobile phone connection to listen to music and podcasts and for hands-free calling.
Easily adjust to your ideal temperature with the touchscreen monitor or jog dial.

Start the engine with the push-to-start button, a Bluetooth key fob, or the unique Operator ID function.
Program your power mode and joystick preferences using Operator ID; the excavator remembers your settings each time you go to work.
Navigate quickly on the standard high-resolution 203 mm (8 in) or optional 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
Not sure how a function works or how to maintain the excavator? Simply access the operator's manual on the touchscreen monitor.
The auto axle lock presses the pedal for you to reduce your overall number of actions. The machine automatically detects when the service brake and axle need to be locked or unlocked. It releases automatically when you press the travel pedal.

Access daily maintenance points from ground level.
Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the pushbutton starting feature.
The standard ROPS cab meets ISO 12117-2:2008 requirements.
Enjoy better visibility into trenches, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design. Rearview and sideview cameras are standard.
The service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
Swing lock prevents front linkage from moving as you travel.
Ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.

Specifications Standard Equipment Optional Equipment

Product Specifications for M315

Engine

Engine Model	Cat C3.6 Cat C3.6
Bore	3.9 in 98 mm
Displacement	221 in³ 3.6 l
Stroke	5 in 120 mm
Engine Emissions	Meets Tier 3 and Stage IIIA emission standards. Meets Tier 3 and Stage IIIA emission standards.
Note (1)	The M315 meets Tier 3 and Stage IIIA emission standards. Net power is tested per ISO 9249:2007. Standards in effect at the time of manufacture. Net power available at flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,000 rpm. The M315 meets Tier 3 and Stage IIIA emission standards. Net power is tested per ISO 9249:2007. Standards in effect at the time of manufacture. Net power available at flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,000 rpm.
Note (2)	No engine power derating required below 3,000 m (9,843 ft) altitude. No engine power derating required below 3,000 m (9,843 ft) altitude.
Note (3)	Recommended for use up to 3000 m (9,843 ft) altitude with engine power derate above 3000 m (9,843 ft). Recommended for use up to 3000 m (9,843 ft) altitude with engine power derate above 3000 m (9,843 ft).
Note (4)	Rated speed at 2,000 rpm. Rated speed at 2,000 rpm.

Hydraulic System

Maximum Pressure - Equipment	5076 psi 35000 MPa
Maximum Pressure - Swing	5149 psi 35500 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa

Swing Mechanism

Maximum Swing Torque	28860 ft·lbf 39 kN·m
Swing Speed	9.1 r/min 9.1 r/min

Machine Weight

Operating Weight Maximum	34610 lb 15700 kg
Note (1)	Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and 9.00-20 dual pneumatic tires. Weight varies depending on configuration. Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and 9.00-20 dual pneumatic tires. Weight varies depending on configuration.
Operating Weight Minimum	33290 lb 15100 kg

Service Refill Capacities

Cooling System	5.3 gal (US) 20 l
Diesel Exhaust Fluid (DEF)	5.3 gal (US) 20 l
Fuel Tank	77.9 gal (US) 295 l
Hydraulic System - Including Tank	58.1 gal (US) 220 l
Hydraulic Tank	23.8 gal (US) 90 l

Dimensions

Boom	4650 mm (15' 3") 4650 mm (15' 3")
Bucket	GD 0.76 m3 (0.99 yd3) GD 0.76 m3 (0.99 yd3)
Stick	2.2m (7' 3") 2.2m (7' 3")
Counterweight Clearance	4 ft 1230 mm
Ground Clearance	1 ft 305 mm
Undercarriage Length	16.1 ft 4920 mm
Wheel Base	8.2 ft 2500 mm

Working Ranges and Forces

Boom Type	One-Piece Boom One-Piece Boom
Bucket	0.76m3 (0.99 y3) GD 0.76m3 (0.99 y3) GD
Stick	R2.2CB (7' 3") R2.2CB (7' 3")
Digging Height	28.6 ft 8730 mm
Dump Height	19.7 ft 6000 mm
Reach at Ground Level	26.9 ft 8190 mm
Vertical Wall Digging Depth	14.1 ft 4320 mm
Note (1)	Range values are calculated with a GD bucket (CW) and CW-20-D.4.N quick coupler with a tip radius of 1387 mm (4' 7"). Range values are with dual pneumatic tires (9.00-20). Range values are calculated with a GD bucket (CW) and CW-20-D.4.N quick coupler with a tip radius of 1387 mm (4' 7"). Range values are with dual pneumatic tires (9.00-20).

Air Conditioning System

Note

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Drive

Maximum Travel Speed

23 mile/h 37 km/h

M315 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

CAB

ROPS, Sound Suppression

Comfort cab

High-resolution 203 mm (8 in) LCD touchscreen monitor

CAT TECHNOLOGIES

Produck Link

Remote Flash/Troubleshoot Capability

ENGINE

Power Mode Selector

One-touch low idle with auto engine speed control

Auto engine idle shutdown

52° C (125° F) high-ambient cooling capacity

Cold start capability -18° C (0° F)

Double element air filter with integrated precleaner

Biodiesel capability up to B20

HYDRAULIC SYSTEM

Boom and stick regeneration circuits

Auto hydraulic warm up

Boom and stick drift reduction valve

BOOM AND STICKS

4650 mm (15' 3") one-piece boom

UNDERCARRIAGE AND STRUCTURES

Tires, 9.00-20 14 PR, dual

All wheel drive

Automatic brake/axle lock

3100 kg (6,834 lb) counterweight

ELECTRICAL SYSTEM

Maintenance free batteries

Roading and indicator lights, front and rear

Programmable time-delay LED working lights

SERVICE AND MAINTENANCE

Sampling ports for Scheduled Oil Sampling (S·O·S)

Ground-level and platform-level engine oil dipsticks

SAFETY AND SECURITY

Wide angle mirrors

Ground-level engine shutoff switch

Anti-skid plate

Signaling/warning horn

M315 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

HYDRAULIC SYSTEM

One-Slider joysticks

Advanced tool control (one/two way high-pressure flow with drift reduction)

Quick coupler circuit

BOOM AND STICKS

2500 mm (8' 2") stick

2200 mm (7' 3") stick

ELECTRICAL SYSTEM

Electrical refueling pump

LED chassis light, left-hand/right-hand boom lights, cab lights

CAT TECHNOLOGIES

Cat Grade with 2D

Cat Payload

2D E-Fence

Cat Grade with 3D

Cat Grade with Advanced 2D

CAB

High-Resolution 254 mm (10 in) LCD touchscreen monitor

Auxiliary relay

SAFETY AND SECURITY

Rear and side view cameras

Rear and side view cameras

Product Specifications for M315

Download Print

Engine

Engine Model	Cat C3.6 Cat C3.6
Bore	3.9 in 98 mm
Displacement	221 in³ 3.6 l
Stroke	5 in 120 mm
Engine Emissions	Meets Tier 3 and Stage IIIA emission standards. Meets Tier 3 and Stage IIIA emission standards.
Note (1)	The M315 meets Tier 3 and Stage IIIA emission standards. Net power is tested per ISO 9249:2007. Standards in effect at the time of manufacture. Net power available at flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,000 rpm. The M315 meets Tier 3 and Stage IIIA emission standards. Net power is tested per ISO 9249:2007. Standards in effect at the time of manufacture. Net power available at flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 2,000 rpm.
Note (2)	No engine power derating required below 3,000 m (9,843 ft) altitude. No engine power derating required below 3,000 m (9,843 ft) altitude.
Note (3)	Recommended for use up to 3000 m (9,843 ft) altitude with engine power derate above 3000 m (9,843 ft). Recommended for use up to 3000 m (9,843 ft) altitude with engine power derate above 3000 m (9,843 ft).
Note (4)	Rated speed at 2,000 rpm. Rated speed at 2,000 rpm.

Hydraulic System

Maximum Pressure - Equipment	5076 psi 35000 MPa
Maximum Pressure - Swing	5149 psi 35500 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa

Swing Mechanism

Maximum Swing Torque	28860 ft·lbf 39 kN·m
Swing Speed	9.1 r/min 9.1 r/min

Machine Weight

Operating Weight Maximum	34610 lb 15700 kg
Note (1)	Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and 9.00-20 dual pneumatic tires. Weight varies depending on configuration. Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and 9.00-20 dual pneumatic tires. Weight varies depending on configuration.
Operating Weight Minimum	33290 lb 15100 kg

Service Refill Capacities

Cooling System	5.3 gal (US) 20 l
Diesel Exhaust Fluid (DEF)	5.3 gal (US) 20 l
Fuel Tank	77.9 gal (US) 295 l
Hydraulic System - Including Tank	58.1 gal (US) 220 l
Hydraulic Tank	23.8 gal (US) 90 l

Dimensions

Boom	4650 mm (15' 3") 4650 mm (15' 3")
Bucket	GD 0.76 m3 (0.99 yd3) GD 0.76 m3 (0.99 yd3)
Stick	2.2m (7' 3") 2.2m (7' 3")
Counterweight Clearance	4 ft 1230 mm
Ground Clearance	1 ft 305 mm
Undercarriage Length	16.1 ft 4920 mm
Wheel Base	8.2 ft 2500 mm

Working Ranges and Forces

Boom Type	One-Piece Boom One-Piece Boom
Bucket	0.76m3 (0.99 y3) GD 0.76m3 (0.99 y3) GD
Stick	R2.2CB (7' 3") R2.2CB (7' 3")
Digging Height	28.6 ft 8730 mm
Dump Height	19.7 ft 6000 mm
Reach at Ground Level	26.9 ft 8190 mm
Vertical Wall Digging Depth	14.1 ft 4320 mm
Note (1)	Range values are calculated with a GD bucket (CW) and CW-20-D.4.N quick coupler with a tip radius of 1387 mm (4' 7"). Range values are with dual pneumatic tires (9.00-20). Range values are calculated with a GD bucket (CW) and CW-20-D.4.N quick coupler with a tip radius of 1387 mm (4' 7"). Range values are with dual pneumatic tires (9.00-20).

Air Conditioning System

Note

Drive

Maximum Travel Speed

23 mile/h 37 km/h

M315 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

CAB

ROPS, Sound Suppression

Comfort cab

High-resolution 203 mm (8 in) LCD touchscreen monitor

CAT TECHNOLOGIES

Produck Link

Remote Flash/Troubleshoot Capability

ENGINE

Power Mode Selector

One-touch low idle with auto engine speed control

Auto engine idle shutdown

52° C (125° F) high-ambient cooling capacity

Cold start capability -18° C (0° F)

Double element air filter with integrated precleaner

Biodiesel capability up to B20

HYDRAULIC SYSTEM

Boom and stick regeneration circuits

Auto hydraulic warm up

Boom and stick drift reduction valve

BOOM AND STICKS

4650 mm (15' 3") one-piece boom

UNDERCARRIAGE AND STRUCTURES

Tires, 9.00-20 14 PR, dual

All wheel drive

Automatic brake/axle lock

3100 kg (6,834 lb) counterweight

ELECTRICAL SYSTEM

Maintenance free batteries

Roading and indicator lights, front and rear

Programmable time-delay LED working lights

SERVICE AND MAINTENANCE

Sampling ports for Scheduled Oil Sampling (S·O·S)

Ground-level and platform-level engine oil dipsticks

SAFETY AND SECURITY

Wide angle mirrors

Ground-level engine shutoff switch

Anti-skid plate

Signaling/warning horn

M315 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

HYDRAULIC SYSTEM

One-Slider joysticks

Advanced tool control (one/two way high-pressure flow with drift reduction)

Quick coupler circuit

BOOM AND STICKS

2500 mm (8' 2") stick

2200 mm (7' 3") stick

ELECTRICAL SYSTEM

Electrical refueling pump

LED chassis light, left-hand/right-hand boom lights, cab lights

CAT TECHNOLOGIES

Cat Grade with 2D

Cat Payload

2D E-Fence

Cat Grade with 3D

Cat Grade with Advanced 2D

CAB

High-Resolution 254 mm (10 in) LCD touchscreen monitor

Auxiliary relay

SAFETY AND SECURITY

Rear and side view cameras

Rear and side view cameras

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Detect

Equipment Management

Grade

Payload

Productivity

Cat 2D E-fence for Excavators

Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards like traffic. 2D E-fence uses data from position sensors to automatically stop motion when the front linkage reaches the defined boundaries.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards like traffic. 2D E-fence uses data from position sensors to automatically stop motion when the front linkage reaches the defined boundaries.

Explore Technology

Cat Inspect

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
Cat Product Link

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology
Cat Remote Flash

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology
Cat Remote Troubleshooting

Remote Troubleshoot allows your Cat dealer to run testing while the machine is operating. Once the problem is identified, a technician can fix it with the correct parts and tools the first time, saving time and money. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency.

Explore Technology
VisionLink®

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology

Remote Troubleshoot allows your Cat dealer to run testing while the machine is operating. Once the problem is identified, a technician can fix it with the correct parts and tools the first time, saving time and money. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency.

Explore Technology

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Grade with 2D for Excavators

Cat Grade with 2D helps excavator operators work up to 35% more efficiently in a wide variety of applications. Delivering real-time guidance for accurate vertical and horizontal control, Grade with 2D helps to ensure that cuts and fills are made to exact specifications – without under or overcutting.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Grade with 2D helps excavator operators work up to 35% more efficiently in a wide variety of applications. Delivering real-time guidance for accurate vertical and horizontal control, Grade with 2D helps to ensure that cuts and fills are made to exact specifications – without under or overcutting.

Explore Technology

Cat Payload for Excavators

Next generation excavators take on all kinds of tasks - loading, stockpiling, material handling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Next generation excavators take on all kinds of tasks - loading, stockpiling, material handling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

VisionLink® Productivity

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how M315 compares against frequently compared products.

Excavators

Selected

M315

Operating Weight Maximum: 34610 lb; 15700 kg
Maximum Travel Speed: 23 mile/h; 37 km/h
Engine Model: Cat C3.6; Cat C3.6

Excavators

M317

Engine Power - ISO 14396:2002: 145 hp; 108 kW
Operating Weight Maximum: 38580 lb; 17500 kg
Engine Model: Cat® C4.4; Cat® C4.4

View Details

Excavators

M320

Operating Weight Maximum: 42990 lb; 19500 kg
Maximum Travel Speed: 23 mile/h; 37 km/h
Engine Model: Cat® C7.1; Cat® C7.1

View Details

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

Videos

360 View

M315 Wheeled Excavator

Stick Steer for Cat® Excavators

Take the interactive virtual product tour to explore the great features and benefits of the M315

Start M315 Tour

Wheel Excavators M315

Overview

Increase Production with Low Operating Costs

Benefits

Enhanced Comfort

Maximize Performance

Up To 10% Lower Maintenance Costs

Features At A Glance

Product Specifications for M315

Engine

Hydraulic System

Swing Mechanism

Machine Weight

Service Refill Capacities

Dimensions

Working Ranges and Forces

Air Conditioning System

Drive

M315 Standard Equipment

NOTE

CAB

CAT TECHNOLOGIES

ENGINE

HYDRAULIC SYSTEM

BOOM AND STICKS

UNDERCARRIAGE AND STRUCTURES

ELECTRICAL SYSTEM

SERVICE AND MAINTENANCE

SAFETY AND SECURITY

M315 Optional Equipment

NOTE

HYDRAULIC SYSTEM

BOOM AND STICKS

ELECTRICAL SYSTEM

CAT TECHNOLOGIES

CAB

SAFETY AND SECURITY

Product Specifications for M315

Engine

Hydraulic System

Swing Mechanism

Machine Weight

Service Refill Capacities

Dimensions

Working Ranges and Forces

Air Conditioning System

Drive

M315 Standard Equipment

NOTE

CAB

CAT TECHNOLOGIES

ENGINE

HYDRAULIC SYSTEM

BOOM AND STICKS

UNDERCARRIAGE AND STRUCTURES

ELECTRICAL SYSTEM

SERVICE AND MAINTENANCE

SAFETY AND SECURITY

M315 Optional Equipment

NOTE

HYDRAULIC SYSTEM

BOOM AND STICKS

ELECTRICAL SYSTEM

CAT TECHNOLOGIES

CAB

SAFETY AND SECURITY

Compatible Technology and Services

Cat 2D E-fence for Excavators

Cat Inspect

Cat Product Link

Cat Remote Flash

Cat Remote Troubleshooting

VisionLink®

Cat Grade with 2D for Excavators

Cat Payload for Excavators

VisionLink® Productivity

See how M315 compares against frequently compared products.

Tools And Expert Help At Every Turn

Payment Calculator

Current Offers

Product Brochures and More Are Ready to Download!