316 GC

Small Excavators 316 GC

Request A Price Find Dealer

Key Specs

Net Power - ISO 9249: 91 hp; 68.2 kW

Operating Weight: 31750 lb; 14400 kg

Maximum Digging Depth: 18.3 ft; 5580 mm

316 GC
Change model

Overview

BEST IN CLASS PERFORMANCE AND RELIABILITY

If you need reliability, durability, high productivity, and low cost, the Cat® 316 GC is made for you. This excavator is designed, built, and uniquely supported to put you on the fast track to prosperity.

Benefits

INCREASED PERFORMANCE

Lower fuel consumption, more swing torque, and increased drawbar pull give you the power you need to improve productivity.

UP TO 25% LOWER MAINTENANCE COSTS

With extended, synchronized maintenance intervals, you get more done at a lower cost.

DESIGNED FOR DAILY WORK

The 316 GC is easy to own and operate and provides the reliability and durability you expect from Cat® products.

Features At A Glance

The redesigned 316 GC allows you to be more productive than the previous 313D2 model.
The C4.4 engine delivers more power, is more fuel-efficient, and meets emission standards equivalent to U.S. EPA Tier 3, EU Stage III, and China Nonroad Stage III.
Breakout force is increased and a redesigned swing drive gives you improved swing torque and smoothness, increasing your productivity.
The main hydraulic pump is electronically controlled for greater efficiency and provides nearly twice the fluid flow of the previous model, improving control and productivity.
Undercarriage and track design better meet high production needs and deliver excellent stability.
A reinforced upper frame gives the 316 GC even greater durability.
A wide range of bucket and tool options lets you take on more tasks.
Reinforced bucket linkage pin allows for greater digging force.
Reinforced stick with tailor-made rebar makes the 316 GC reliable enough to handle any tough application.

Match the power to the job with two working modes: Eco for lowest fuel burn, and Power for highest productivity.
The 316 GC is designed for easier and less expensive maintenance, lowering costs up to 25%.
Hydraulic and air filters have increased service life, while the pilot and case drain filters have been eliminated.
Most daily maintenance can be performed from ground level, decreasing the amount of time you spend on daily tasks.
Swing drive operates on the hydraulic system, eliminating the need to check or refill a different oil system.
Both the hydraulic and engine oil refill amounts have been reduced with no change in performance or service life.
When hydraulic demand is low, the Automatic Engine Control (AEC) system reduces RPM, lowering your fuel costs.
Cat Product Link™ comes standard so you can remotely monitor fuel consumption, machine health, location, and hours on demand through VisionLink®.

Start the engine with a pushbutton.
One-button sticks (with adjustable joystick response and gain) make control easy for any operator.
Navigate quickly through simplified control menus on the high-resolution 203 mm (8 in) touchscreen monitor.
Easily move soft, wet, and sticky material with a new, optional shallow profile bucket.
Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.

Wide seat (larger than previous models) adjusts for operators of all sizes.
Standard automatic climate control keeps you at the right temperature all shift long.
Convenience features include a radio, headphone port, and a USB port for connecting and charging devices.
Cup holder and storage space forward of the controls can hold large cups and wide cell phones; storage behind the seat can hold a hard hat, large lunchbox, and other items.

Nearly all major mechanical components are accessed from the ground or the service platform.
Radiator screens can be removed easily, are simple to clean, and keep the radiators free of small debris that can be difficult to remove, such as grass clippings.
Engine compartment is easily accessed from the service platform; fluid caps and gauges are easily reached, and an automatic tensioner ensures you will never need to make belt adjustments.
Cat technology helps you monitor your machine, and the Caterpillar service network helps you maximize uptime.

Emergency engine and electrical shut offs are also at ground level.
Handrails meet ISO 2867:2011 requirements; steps and platforms use anti-skid plates with countersunk bolts to help prevent slipping and tripping.
Operator can exit in an emergency through either the rear window or the steel top hatch.
An updated cab has larger windows and smaller cab posts, providing excellent visibility into the trench and in every direction.
Bright exterior LED lights and an optional rearview camera ensure you have total visibility on the jobsite.
Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.

Specifications Standard Equipment Optional Equipment

Product Specifications for 316 GC

Engine

Net Power - ISO 9249	91 hp 68.2 kW
Engine Model	C4.4 C4.4
Engine Power - ISO 14396:2002	100 hp 74.5 kW
Bore	4 in 105 mm
Stroke	4 in 127 mm
Displacement	268.5 in³ 4.4 l
Biodiesel Capability	Up to B20 Up to B20
Emissions	Meets emission standards equivalent to U.S. EPA Tier 3, EU Stage IIIA, Japan 2006 (Tier 3), and China Nonroad Stage III. Meets emission standards equivalent to U.S. EPA Tier 3, EU Stage IIIA, Japan 2006 (Tier 3), and China Nonroad Stage III.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to 100% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. For use of blends higher than 20% biodiesel, consult your Cat dealer. Lower-carbon intensity fuels do not significantly reduce GHGs ¹Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels* up to 100% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. For use of blends higher than 20% biodiesel, consult your Cat dealer. *Lower-carbon intensity fuels do not significantly reduce GHGs

Hydraulic System

Main System - Maximum Flow	247 L/min (65 gal/min) 247 L/min (65 gal/min)
Maximum Pressure - Equipment	5076 psi 35000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa
Maximum Pressure - Swing	3756 psi 25900 kPa
Bucket Cylinder - Stroke	37 in 939 mm
Boom Cylinder - Bore	4 in 105 mm
Stick Cylinder - Stroke	47 in 1197 mm
Stick Cylinder - Bore	5 in 120 mm
Bucket Cylinder - Bore	4 in 100 mm
Boom Cylinder - Stroke	40 in 1015 mm

Swing Mechanism

Swing Speed	11.5 r/min 11.5 r/min
Maximum Swing Torque	25151 ft·lbf 34.1 kN·m

Weights

Operating Weight

31750 lb 14400 kg

Service Refill Capacities

Fuel Tank Capacity	63 gal (US) 237 l
Cooling System	4.8 gal (US) 18 l
Engine Oil	4.2 gal (US) 16 l
Final Drive - Each	0.8 gal (US) 3 l
Hydraulic System - Including Tank	38.3 gal (US) 145 l
Hydraulic Tank	20.3 gal (US) 77 l

Dimensions

Boom	HD 4.65 m (15'3") HD 4.65 m (15'3")
Stick	HD 2.5 m (8'2") HD 2.5 m (8'2")
Bucket	HD 0.76 m³ (0.99 yd³) HD 0.76 m³ (0.99 yd³)
Shipping Height - Top of Cab	9.1 ft 2790 mm
Handrail Height	9.3 ft 2840 mm
Shipping Length	25.8 ft 7870 mm
Tail Swing Radius	7.8 ft 2350 mm
Counterweight Clearance	3.1 ft 900 mm
Ground Clearance	1.4 ft 430 mm
Track Length	12.3 ft 3750 mm
Length to Center of Rollers	10 ft 3040 mm
Track Gauge	6.5 ft 1990 mm
Transport Width	8.2 ft 2490 mm
Length - Center of Rollers	10 ft 3040 mm

Working Ranges & Forces

Maximum Digging Depth	18.3 ft 5580 mm
Boom	HD 4.65 m (15'3") HD 4.65 m (15'3")
Stick	HD 2.5 m (8'2") HD 2.5 m (8'2")
Bucket	HD 0.76 m³ (0.99 yd³) HD 0.76 m³ (0.99 yd³)
Maximum Reach at Ground Level	27 ft 3220 mm
Maximum Cutting Height	27.9 ft 8520 mm
Maximum Loading Height	19.9 ft 6060 mm
Minimum Loading Height	6.5 ft 1970 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	17.6 ft 5380 mm
Maximum Vertical Wall Digging Depth	16.6 ft 5050 mm
Bucket Digging Force - ISO	22120 lbf 98.4 kN
Stick Digging Force - ISO	15470 lbf 68.8 kN

316 GC Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOM AND STICKS

4.65 m (15'3") Reach boom

CAB

Sound suppressed with viscous mounts

High-resolution 203 mm (8") LCD touchscreen monitor

Mechanically adjustable seat with headrest

Automatic bi-level air conditioner

Keyless push-to-start engine control

Floor-mounted adjustable consoles

1-button joystick

AM/FM radio with USB and aux port

24V DC outlet

Cup holder and storage compartments

70/30 tempered glass windshield

Upper radial wiper with washer

Openable steel hatch

Dome light

Washable floor mat

CAT TECHNOLOGY

Cat Product Link

ELECTRICAL SYSTEM

750 CCA maintenance-free batteries (x2)

Electrical disconnect switch

LED left-side boom and chassis lights

LED cab light

Cat C3.6 single turbo diesel engine

ENGINE

Three selectable modes: Power, Smart, Eco

52°C (125°F) high-ambient cooling capability

-18°C (0°F) cold start capability

Biodiesel capability up to B20

Electric fuel priming pump

Two-stage fuel filtration system

Sealed double-element air filter with precleaner

HYDRAULIC SYSTEM

Electronic main control valve, hammer ready

Electronic control pump

Boom and stick regeneration circuits

Automatic hydraulic oil warm up

Automatic two-speed travel

High performance hydraulic return filter

SAFETY AND SECURITY

Anti-skid plating with countersunk bolts

Handrail and handhold

Lockable external tool/storage box

Mirror package

Signaling/warning horn

Hydraulic lockout lever

SERVICE AND MAINTENANCE

Grouped location of filters

Radiator screen

S·O·S sampling ports

UNDERCARRIAGE AND STRUCTURES

Center track guiding guard

Grease lubricated track link

Bottom guards

Travel motor guards

3.2 mt (7,055 lb) counterweight

Tie-down points

316 GC Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOM AND STICKS

2.5 m (8'2") Reach stick

3.0 m (9'10") Reach stick

CAB

3-button joystick

ELECTRICAL SYSTEM

LED right-side boom light

ENGINE

-25°C (-13°F) cold start capability

HYDRAULIC SYSTEM

Hammer lines

Hammer floor pedal kit

SAFETY AND SECURITY

Rearview camera

Swing alarm

Travel alarm with cancel switch

UNDERCARRIAGE AND STRUCTURES

500 mm (20") triple grouser shoes

600 mm (24") triple grouser shoes

700 mm (28") triple grouser shoes with additional steps

770 mm (30") triple grouser shoes with additional steps

Swivel guard

Product Specifications for 316 GC

Download Print

Engine

Net Power - ISO 9249	91 hp 68.2 kW
Engine Model	C4.4 C4.4
Engine Power - ISO 14396:2002	100 hp 74.5 kW
Bore	4 in 105 mm
Stroke	4 in 127 mm
Displacement	268.5 in³ 4.4 l
Biodiesel Capability	Up to B20 Up to B20
Emissions	Meets emission standards equivalent to U.S. EPA Tier 3, EU Stage IIIA, Japan 2006 (Tier 3), and China Nonroad Stage III. Meets emission standards equivalent to U.S. EPA Tier 3, EU Stage IIIA, Japan 2006 (Tier 3), and China Nonroad Stage III.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to 100% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. For use of blends higher than 20% biodiesel, consult your Cat dealer. Lower-carbon intensity fuels do not significantly reduce GHGs ¹Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels* up to 100% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. For use of blends higher than 20% biodiesel, consult your Cat dealer. *Lower-carbon intensity fuels do not significantly reduce GHGs

Hydraulic System

Main System - Maximum Flow	247 L/min (65 gal/min) 247 L/min (65 gal/min)
Maximum Pressure - Equipment	5076 psi 35000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa
Maximum Pressure - Swing	3756 psi 25900 kPa
Bucket Cylinder - Stroke	37 in 939 mm
Boom Cylinder - Bore	4 in 105 mm
Stick Cylinder - Stroke	47 in 1197 mm
Stick Cylinder - Bore	5 in 120 mm
Bucket Cylinder - Bore	4 in 100 mm
Boom Cylinder - Stroke	40 in 1015 mm

Swing Mechanism

Swing Speed	11.5 r/min 11.5 r/min
Maximum Swing Torque	25151 ft·lbf 34.1 kN·m

Weights

Operating Weight

31750 lb 14400 kg

Service Refill Capacities

Fuel Tank Capacity	63 gal (US) 237 l
Cooling System	4.8 gal (US) 18 l
Engine Oil	4.2 gal (US) 16 l
Final Drive - Each	0.8 gal (US) 3 l
Hydraulic System - Including Tank	38.3 gal (US) 145 l
Hydraulic Tank	20.3 gal (US) 77 l

Dimensions

Boom	HD 4.65 m (15'3") HD 4.65 m (15'3")
Stick	HD 2.5 m (8'2") HD 2.5 m (8'2")
Bucket	HD 0.76 m³ (0.99 yd³) HD 0.76 m³ (0.99 yd³)
Shipping Height - Top of Cab	9.1 ft 2790 mm
Handrail Height	9.3 ft 2840 mm
Shipping Length	25.8 ft 7870 mm
Tail Swing Radius	7.8 ft 2350 mm
Counterweight Clearance	3.1 ft 900 mm
Ground Clearance	1.4 ft 430 mm
Track Length	12.3 ft 3750 mm
Length to Center of Rollers	10 ft 3040 mm
Track Gauge	6.5 ft 1990 mm
Transport Width	8.2 ft 2490 mm
Length - Center of Rollers	10 ft 3040 mm

Working Ranges & Forces

Maximum Digging Depth	18.3 ft 5580 mm
Boom	HD 4.65 m (15'3") HD 4.65 m (15'3")
Stick	HD 2.5 m (8'2") HD 2.5 m (8'2")
Bucket	HD 0.76 m³ (0.99 yd³) HD 0.76 m³ (0.99 yd³)
Maximum Reach at Ground Level	27 ft 3220 mm
Maximum Cutting Height	27.9 ft 8520 mm
Maximum Loading Height	19.9 ft 6060 mm
Minimum Loading Height	6.5 ft 1970 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	17.6 ft 5380 mm
Maximum Vertical Wall Digging Depth	16.6 ft 5050 mm
Bucket Digging Force - ISO	22120 lbf 98.4 kN
Stick Digging Force - ISO	15470 lbf 68.8 kN

316 GC Standard Equipment

Print

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOM AND STICKS

4.65 m (15'3") Reach boom

CAB

Sound suppressed with viscous mounts

High-resolution 203 mm (8") LCD touchscreen monitor

Mechanically adjustable seat with headrest

Automatic bi-level air conditioner

Keyless push-to-start engine control

Floor-mounted adjustable consoles

1-button joystick

AM/FM radio with USB and aux port

24V DC outlet

Cup holder and storage compartments

70/30 tempered glass windshield

Upper radial wiper with washer

Openable steel hatch

Dome light

Washable floor mat

CAT TECHNOLOGY

Cat Product Link

ELECTRICAL SYSTEM

750 CCA maintenance-free batteries (x2)

Electrical disconnect switch

LED left-side boom and chassis lights

LED cab light

Cat C3.6 single turbo diesel engine

ENGINE

Three selectable modes: Power, Smart, Eco

52°C (125°F) high-ambient cooling capability

-18°C (0°F) cold start capability

Biodiesel capability up to B20

Electric fuel priming pump

Two-stage fuel filtration system

Sealed double-element air filter with precleaner

HYDRAULIC SYSTEM

Electronic main control valve, hammer ready

Electronic control pump

Boom and stick regeneration circuits

Automatic hydraulic oil warm up

Automatic two-speed travel

High performance hydraulic return filter

SAFETY AND SECURITY

Anti-skid plating with countersunk bolts

Handrail and handhold

Lockable external tool/storage box

Mirror package

Signaling/warning horn

Hydraulic lockout lever

SERVICE AND MAINTENANCE

Grouped location of filters

Radiator screen

S·O·S sampling ports

UNDERCARRIAGE AND STRUCTURES

Center track guiding guard

Grease lubricated track link

Bottom guards

Travel motor guards

3.2 mt (7,055 lb) counterweight

Tie-down points

316 GC Optional Equipment

Print

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOM AND STICKS

2.5 m (8'2") Reach stick

3.0 m (9'10") Reach stick

CAB

3-button joystick

ELECTRICAL SYSTEM

LED right-side boom light

ENGINE

-25°C (-13°F) cold start capability

HYDRAULIC SYSTEM

Hammer lines

Hammer floor pedal kit

SAFETY AND SECURITY

Rearview camera

Swing alarm

Travel alarm with cancel switch

UNDERCARRIAGE AND STRUCTURES

500 mm (20") triple grouser shoes

600 mm (24") triple grouser shoes

700 mm (28") triple grouser shoes with additional steps

770 mm (30") triple grouser shoes with additional steps

Swivel guard

Tools And Expert Help At Every Turn

Payment Calculator

Payment Calculator

Current Offers

Rental Options

Used Options

Find Dealer

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

360 View

316 GC

316 GC

316 GC

316 GC

316 GC