Diesel Generator Sets 3516B (60 Hz)

Product Specifications for 3516B (60 Hz)

3516B (60 Hz) Standard Equipment

Air Inlet System

• Air cleaner; single element canister type

Cooling

• Package mounted radiator

Exhaust

• Exhaust flange outlet

Fuel

• Primary fuel filter with integral water separator

• Secondary fuel filters

• Fuel priming pump

Generator

• IP23 Protection

• Matched to the performance and output characteristics of Cat engines

Power Termination

• Busbar

Control Panel

• Cat ECS Genset controller

General

• Paint - Caterpillar yellow except rails and radiators gloss black

Control Panels

• Speed adjust

• Text alarm/event descriptions

• Generator set packages include Caterpillar's voltage regulator

• Auto/start/stop control

• 24 Volt DC operation

• Cat ECS 100

• Generator mounted - Rear facing

• Controls:

• Environmental sealed front face

• Engine cool-down timer

• Emergency stop pushbutton

• Limiter and exciter diode monitor

• Engine cycle crank

• Lamp test

• Alarm acknowledge

• Customizable screens

• PLC functionality

• Load histogram feature

• 0 True RMS AC metering, 3-phase, +/-2% accuracy

• Operating hours

• Digital indication for:

• DC volts

• RPM

• Coolant temperature

• Amps (per phase & average)

• Oil pressure (psi, kPa or bar)

• Volts (L-L & L-N)

• Frequency (Hz)

• Power factor (per phase & average)

• kW (per phase, average & percent)

• High coolant temperature

• Low oil pressure

• Warning/shutdown with common LED indication of shutdowns for01/10/2018:

• kVAr (per phase, average & percent)

• kVA (per phase, average & percent)

• kVAr (per phase, average & percent)

• Emergency stop

• Overspeed

• Failure to start (overcrank)

• Programmable protective relaying functions:

• Low coolant temperature

• Generator phase sequence

• Low coolant level

• 1 Programmable digital outputs

• Gear type lube oil pump

• Battery disconnect switch

• Caterpillar yellow with high gloss black rails and radiator

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Medium voltage: Form wound - Permanent magnet excitation (PMG) - Winding temperature detectors - NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby) - Busbar connections, right side extension box, bottom cable entry - NEMA standard hole pattern

• Fumes disposal

• Permanent magnet excitation (PMG)

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Permanent magnet excitation (PMG)

• NEMA standard hole pattern

• Reverse reactive power (kVAr) (32RV)

• Over/under voltage (27/59)

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Permanent magnet excitation (PMG)

• Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

• Permanent magnet excitation (PMG)

• SAE standard rotation

• Internal excitation (IE)

• Flexible fuel lines - shipped loose

• IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min / max exciter

• Busbar connections, right side extension box, bottom cable entry

• Medium voltage:

• Communications:

• NEMA standard hole pattern

• Lubricating oil

• Oil drain lines and valve

• 3 Phase brushless, Salient pole

• 24 Volt electric starting motor

• 6 Customer programmable digital inputs

• Dry exhaust manifold

• Accessory module data link

• ADEM A3

• Form wound

• ATAAC - 3516E package radiators shipped installed

• Busbar connections, top center mounted, top cable entry

• High voltage:

• 4 Programmable relay outputs (Form A)

• Anti-condensation space heater

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Controls: Speed adjust - Auto/start/stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy

• NEMA standard hole pattern

• 45 Amp Charging alternator

• 3 Analog inputs

• Random wound

• Anti-vibration mounts (shipped loose)

• Cat connect

• Oil filter, filler and dipstick

• Rails - Engine/generator/radiator mounting

• Customer data link (Modbus RTU)

• Flywheel and flywheel housing - SAE No. 00

• English

• Busbar connections, right side extension box, bottom cable entry

• Serial annunciator module data link

• Integral lube oil cool

• Certified standard PGS provided

• Winding temperature detectors

• 1 Programmable relay outputs (Form C)

• Reverse power (kW) (32)

• Form wound - Permanent magnet excitation (PMG)

• Right hand servicing

• Overcurrent (50/51)

• 6 Lead

• Flanged faced outlet(s)

• Low voltage:

• Number of I/O varies on options selected

• Battery and battery rack w/cables

• Over/under frequency (81 o/u)

• Fuel cooler; not included with packages without radiator

• Busbar connections, right side extension box, bottom cable entry

• Rubber anti-vibration mounts - shipped loose

• NEMA standard hole pattern

3516B (60 Hz) Optional Equipment

Control System

• EMCP 4.4

Air Inlet System

• Single element filter

• Dual element air cleaner

Exhaust

• Exhaust mufflers

Generator

• Permanent magnet excitation (PMG)

• Internal excitation (IE)

• Anti-condensation heater

• Oversize and premium generators

Cooling System

• Water level switch gauges

• Standard ambient radiators

• Coolant

• Standard ambient ATAAC radiators

• Optional installed ATAAC radiators

• Air inlet protection including air shut off magnetic switch

• Optional installed radiator

Power Termination

• Circuit breakers, IEC compliant

• Circuit breakers, UL listed

Control Panels

• Generator temperature monitoring & protection

• Remote monitoring software

• Load share module

• Digital I/O module

Exhaust System

• Exhaust Offset

• Flanges

• Elbows

• Y Adapters

• Flange and exhaust expanders

• Clean emission parets

• Mufflers

• Flexible fittings

Fuel System

• Primary fuel filter

General

• Special paint

• US aid emblem

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

• EEC Declaration of Conformity

• Integral & sub-base fuel tanks

• Enclosures: Sound attenuated, weather protective

• Integral & sub-base UL listed dual wall fuel tanks

• EU Certificate of Conformance (CE)

• The following options are based on regional and product configuration:

• Automatic transfer switches (ATS)

• UL 2200 package

Mounting

• Rubber anti-vibration mounts

• Spring type vibration isolators

• IBC isolators

Generators and Attachments

• Generator conversions - IE and PM

• 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 Frame

• 380, 440, 480, 600 Volts, 3 phase, 1800 rpm, RW, IE, No. of leads: 6, Picth: 0.6667 - 1600 Frame

• 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 phase, 1800 rpm, RW, PM, No. of leads: 6, Picth: 0.6667 - 1600 and 1800 Frames

• Alternator air cleaner

• Space heater

Intrumentation

• Pyrometer and thermocouples

Lube System

• Prelube pump groups

• Oil lever regulator

• Lube oil

Starting/Charging

• Battery chargers

• Air starting motor with control and silencer

• Heavy duty starting system

• Oversize batteries

• Charging alternator

Crankcase Systems

• Crankcase protection group: No explosion relief valves; Explosion relief valves

• Crankcase ventilation system

Mounting System

• Spring type vibration isolators

• IBC vibration isolators

• Puck style low efficiency isolators

Power Connections

• Neutral ground connections

• Center post busbarss

• Right, left side and rear power connections

• Grounding groups

Special Tests / Reports

• Standard engine test charge

• IBC Certification

• Special package tests: PGS Test report @ 1.0 and 0.8 power factors

• Generator set test report

• CSA Certification

• Torsional vibration analysis TVA report

• Fuel consumption test

Starting / Charging Sytem

• Jacket water heaters