Diesel Generator Sets C175-16 Tier 4 Final (60 Hz)

Product Specifications for C175-16 Tier 4 Final (60 Hz)

C175-16 Tier 4 Final (60 Hz) Standard Equipment

Control Panel

• - Warning/shutdown with common LED indication of shutdowns with indicating lights for:

• #NAME?

• Environmental sealed front face

• #NAME?

• Lamp test

• #NAME?

• Generator mounted - rear facing

• - Volts (L-L & L-N)

• - Amps (per phase & average)

• #NAME?

• Auto/start/stop control

• 24 Volt DC operation

• #NAME?

• - Overcurrent (50/51)

• Local annunciator option

• #NAME?

• Overspeed

• #NAME?

• #NAME?

• 12 Programmable digital inputs

• kW (per phase, average & percent)

• #NAME?

• True RMS AC metering, 3-phase, +/-0.25% accuracy

• #NAME?

• DC volts

• Low coolant level Over/under voltage (27/59)

• #NAME?

• Controls:

• #NAME?

• Amps (per phase & average)

• #NAME?

• #NAME?

• kVAr (per phase, average & percent)

• - kVA (per phase, average & percent)

• - Over/under voltage (27/59)

• #NAME?

• Failure to start (overcrank)

• #NAME?

• #NAME?

• Low coolant level (requires optional coolant sensor)

• 4 Programmable relay outputs (Form A)

• Power factor (per phase & average)

• Reverse reactive power (kVAr) (32RV)

• Emergency stop button

• #NAME?

• Over/under frequency (81 o/u)

• Volts (L-L & L-N)

• Warning/shutdown with common LED indication of shutdowns with indicating lights for:

• - Power factor (per phase & average)

• 2 Programmable digital outputs

• #NAME?

• #NAME?

• #NAME?

• #NAME?

• Digital indication for:

• Engine cool-down timer

• 6 Programmable digital inputs

• #NAME?

• Customer data link (Modbus RTU)

• #NAME?

• 2 Programmable PWM outputs

• #NAME?

• kVAr-hr (total)

• Low oil pressure

• - Over/under frequency (81 o/u)

• Accessory module data link

• Low coolant temperature

• 16 Programmable digital outputs

• - kVAr (per phase, average & percent)

• kVA (per phase, average & percent)

• - kW (per phase, average & percent)

• Serial annunciator module data link

• Cat ECS 100

• 2 Programmable relay outputs (Form C)

• Coolant temperature

• #NAME?

• Operating hours

• - Reverse reactive power (kVAr) (32RV)

• Programmable protective relaying functions:

• RPM

• #NAME?

• 3 Programmable analog outputs

• Overcurrent (50/51)

• Alarm acknowledge

• #NAME?

• - Reverse power (kW) (32)

• kW-hr (total)

• High coolant temperature

• #NAME?

• Communications

• #NAME?

• Engine cycle crank

• Cat ECS 100 controller includes:

• Reverse power (kW) (32)

• - True RMS AC metering, 3-phase, +/-0.25% accuracy

• Frequency (Hz)

• - 24 Volt DC operation

• Text alarm/event descriptions

• 3 Programmable analog inputs

• Speed adjust

• #NAME?

Cooling System

• Radiator group - shipped loose

• Fan and belt guards

• SCAC cooling

• Coolant sensor - (2 x shipped loose: 1/4-18 and 1/2-14 NPTF)

• Coolant drain line and valves

Exhaust System

• CEM dosing module Features include:

• Insulated CEM

• DEF filter

• CEM dosing module

• Harness from dosing module to CEM

• Air filter

• Anti-freeze protection

• 120 VAC

• Dry exhaust manifold

• Flanged faced outlets at CEM in (21.2") and out (25")

• Air and heated DEF lines from dosing module to CEM

Fuel System

• Secondary/tertiary fuel filters

• Primary fuel filter water/fuel water separator

• 3 Filters, shipped loose - can be mounted on frame rails (Requires dealer provided flex)

• 10 Micron spin on type

• 3 Filters, engine mounted

• 4 Micron Spin On Type

• 10 Micron spin on type

Generator and Attachments

• Caterpillar's digital voltage regulator (CDVR) includes:

• Permanent magnet excitation (PMG)

• (MV) Busbar connections, right side extension box, bottom cable entry: - 60 Hz models: NEMA standard hole pattern

• NEMA Class H insulation system, Class F temperature rise at 40C ambient (105C prime / 130C standby)

• RFI suppression

• 3000 Frame generators (MV/HV)

• 6 Lead

• Reactive droop capability

• Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Form wound

• 3 Phase voltage sensing

• KVAR / PF modes

• Right side extension box, bottom cable entry

• 3 Phase brushless, Salient pole

• Anti-condensation space heater

• IEC platinum stator RTDs (.00385 temperature coefficient)

• Exciter diode monitor

• 1800 Frame generators (LV/MV)

• Min / Max exciter limiter

• (LV) Busbar connections, top / center mounted, top cable entry 60 Hz models: NEMA standard hole pattern

• NEMA Class H insulation

Governing System

• ADEM A4

• Redundant shutdown (Overspeed protection through a duplicate speed sensing system)

Lube System

• Oil filter, filler and dipstick

• Gear type lube oil pump

• Integral lube Oil cooler

• Lubricating oil

• Prelube - required with prime and continuous; optional with standby

• Oil drain lines and valve

• Fumes disposal

Mounting System

• Batteries and battery rack w/cables

• Battery disconnect switch

• Rubber anti-vibration mounts - shipped loose

• Dual 24-volt Electric starting motors

• Rails - Engine/Generator

Service Instructions

• Two PM Inspections

General

• * For HV applications, customer to provide 120V secondary sensing, 5A secondary current sensing and harness between package and EMCP4.3 (drawing provided). CDVR is installed in wall mount.

• Paint - Caterpillar yellow with high gloss black rails & radiator

• *For HV Cat ECS: Includes wall mount control panel, shipped loose, for customer mounting and 7.5 meter interconnect harness.

• RH service (except oil filter service 60 Hz models: left hand service)

• SAE standard rotation

• Flywheel and flywheel housing-SAE No. 00

Air Inlet System

• Air cleaner; 4 x single element canister with service indicator(s).

• Single stage air cleaner

C175-16 Tier 4 Final (60 Hz) Optional Equipment

Air Inlet System

• Single stage air cleaner

Control Panels

• Customer interface options

• Customer AC-DC connection mounting location - LV / MV

• EMCP 4.4 (requires 1800 frame Low voltage package)s

• Remote speed adjust

• Modbus monitoring of packages

• Vandal proof panel door

• E-Stop - Only for use with 3000 frame generators and EMCP4.3

• Generator temperature monitoring

• Controller mounting location - LV / MV (requires 1800 frame generator)

• Load share module

• Load share governor / auxiliary plate and auxiliary box (LV)

• Annunciator modules

Cooling System

• SCAC circuits

• Package mounted radiator

• Remote radiators

• Fuel cooler

Exhaust

• Exhaust collectors/manifold

Fuel System

• Primary fuel filter

General

• Paint - colors (other than Caterpillar yellow) or high performance paints

• US aid emblem

Generator and Attachments

• Differential current transformers (DCT): - 5, 9 and 15 kV class DCTs

• Space heater kit

• 480 Volts, Generators (MV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 Leads, pitch = 0.6667 -- 1800, 3000 frame

• Thermostat for space heater

• 480 Volts, Generators (LV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 Leads, pitch = 0.6667 - 1800 frame

Instrumentation

• Harness - ECM interconnect

• Pyrometer and thermocouples

Lube System

• Electric prelube pumps

• Lubricating oil

• Standard sump oil pan

• Oil pan drain valve

• Oil filters

• Lube oil heater

Crankcase Systems

• Explosion relief valves

Mounting System

• Spring-type linear vibration isolators

• Rubber anti-vibration mounts

• IBC vibration isolators - shipped loose

Power Connections

• 5000 Amp, 3 Pole, UL-100% rated Circuit breakers

• Side/rear mounted busbars (LV)

• MV Power Connection Options: 1800 Frame generator side / rear mounted busbars - Left hand MV nema busbar - Right hand MV nema busbar

• 5000 Amp, 3 Pole, IEC-rated Circuit breakers

• Center post busbarss (LV) connections

• Neutral ground - (MV)

• Cable entry options (LV)

• Masterpack breaker connections

• Circuit breaker harnesses

• Power connection covers

• Cable entry options - 1800 frame (MV)

• Control packaging (LV) - Enclosures

• Optional package mounted circuit breakers (LV)

• 4000 Amp, 3 Pole, UL-100% rated Circuit breakers

• 4000 Amp, 3 Pole, IEC-Rated Circuit breakers

Service Tools - Barring Groups

• Control GP - air powered bar group

• Engine group

• Group manual

• Engine air powered

Special Tests / Reports

• Standard genset torsional vibration analysis (TVA) report

• Custom generator TVA report

• Standard engine test charge

• PGS Test report @ 0.8 power factor

• Generator test report

• PGS Test report @ 1.0 power factor

• Fuel consumption test

Starting/Charging

• Heavy duty battery set with rack

• Jacket water heater wiring groups

• Jacket water heaters

• 24 Volt power distribution box

• 35 and 50 Amp Battery chargers

• Covers - starter locations

• 24 Volt electric starting motor

• Air starting motor

• 24 Volt battery set - dry