Move more with less fuel

Eco Mode saves fuel while maintaining productivity.

Maintain cross slope

Cat Grade Control helps operator maintain desired cross slope.

Manage your fleet

Cat MineStar helps manage your fleet to optimize quality and operating costs.

Motor Graders 16

16 Motor Grader

Request A Price Find Dealer

Key Specs

Base Power (1st Gear) - Net: 290 hp; 216 kW

Operating Weight - Typically Equipped: 71454 lb; 32411 kg

Blade Width: 16 ft; 4.9 m

16
Change model

Overview

Keep Haul Roads Productive and Efficient

Specially configured for mine operation and haul road development and maintenance, the Cat® 16 maximizes availability and controls operating costs. Fuel efficient technologies and legendary Cat robust design and construction ensure these machines help your operation optimize profits.

Benefits

Move more with less fuel

Eco Mode saves fuel while maintaining productivity.

Maintain cross slope

Cat Grade Control helps operator maintain desired cross slope.

Manage your fleet

Cat MineStar helps manage your fleet to optimize quality and operating costs.

Features At A Glance

Reduce downtime and operating cost through improved serviceability, fuel economy and reduced maintenance, maximizing availability.
Major components are modular, so most can be removed and reinstalled without disturbing other components for peak repair efficiency.
C13 engine has been optimized to be as efficient without compromising performance. Eco mode can be activated to control high engine idle speed and ensure the engine is performing as efficiently as possible, offering additional fuel savings.
Center shift section of the front frame is a heavy-duty steel casting improving stress distribution for enhanced durability.
Rear frame structure is lengthened providing easy access to components in the engine enclosure as well as improved machine balance.
Front axle steering cylinder enhances durability and hydraulic lines are routed to improve reliability.
Modular cooling package provides simple removal and installation of components on the cooling system reducing service time.
Engine enclosure doors provide complete access to the engine without any enclosure post.
Extended maintenance intervals reduce the number of touches and downtime.
Fluid monitoring systems help prevent critical components from damage when levels are low.
Information Display in cab shows service/maintenance concerns and diagnostic codes are logged.

Motor graders have a direct impact on how productively all other mining machines operate – in particular in their role in haul road maintenance. The 16is optimized exactly to this goal:
Additional weight along with adjusted weight balance offers enhanced performance improving traction and the ability to keep ground speed, especially when carrying a large load.
Available with three variations of the C13 engine depending upon sales region.
Emissions reduction technology is transparent, with no action required from the operator.
Multi-color / touch screen information display is the operator's gateway to monitoring machine performance and provides convenient way of modifying machine parameters to tailor performance to the current task. Assist in providing service information for troubleshooting.
Cat Product Link™ Elite integrates into the machine, taking guesswork out of equipment management. Provides easy access to machine location, hours, fuel usage, idle time and event codes via the online VisionLink® user interface helping you manage your fleet and operating costs.
Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.

Caterpillar considers the safety of everyone in, on or around Cat equipment when developing products or enhancing safety features.
The 16has safety features including -

Access to Tandem
Rear View Camera
Seat Belt Indicator
Access Platform – optional
Service Access Platform – optional
Fire Suppression Ready System – optional

Cat dealers are committed to helping you succeed, ensuring you have the right machine for the job, making parts available, operator training and providing a wide range of versatile work tools.

Specifications Standard Equipment Optional Equipment

Product Specifications for 16

Engine

Base Power (1st Gear) - Net	290 hp 216 kW
Engine Model	Cat® C13 Cat® C13
Bore	5.1 in 130 mm
Stroke	6.2 in 157 mm
Speed at Rated Power	2,000 rpm 2,000 rpm
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	12176 ft 3711 m
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	1270 lb/ft 1721 N·m
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4)	1306 lb/ft 1771 N·m
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	1270 lb/ft 1721 N·m
Emissions (2)	Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4)	43% 43%
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	39% 39%
Standard - Ambient Capability	122 °F 50 °C
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	12973 ft 3954 m
VHP Range - Net - Metric	216-259 kW (294-353 hp) 216-259 kW (294-353 hp)
Base Power (1st Gear) - Net - Metric	294 hp 216 kW
Standard - Fan Speed - Minimum	550 rpm 550 rpm
Standard - Fan Speed - Maximum	1,450 rpm 1,450 rpm
Emissions (3)	Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	39% 39%
Emissions (1)	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
VHP Range - Net	216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4)	12500 ft 3810 m
Optimized VHP Range - Net	216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
Displacement	763 in³ 12.5 l
Number of Cylinders	6 6

Weights

Operating Weight - Typically Equipped

71454 lb 32411 kg

Moldboard

Blade Width	16 ft 4.9 m
Arc Radius	16.3 in 413 mm
Throat Clearance	5 in 126 mm
Thickness	1 in 25 mm
End Bit - Width	6 in 152 mm
*Blade Pull - Base GVW**	41039 lb 18615 kg
Cutting Edge Width	8 in 203 mm
Cutting Edge Thickness	1 in 25 mm
Down Force - Maximum GVW	43861 lb 19895 kg
Height	31 in 787 mm
Width	16 ft 4.9 m
Down Force - Base GVW	30743 lb 13945 kg
*Blade Pull - Maximum GVW**	52878 lb 23985 kg
End Bit - Thickness	0.75 in 19 mm
Note	Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

Service Refill

Fuel Capacity	131 gal (US) 496 l
Cooling System	18.5 gal (US) 70 l
DEF Tank	4.2 gal (US) 16 l
Hydraulic System - Total	38.6 gal (US) 146 l
Hydraulic System - Tank	18.5 gal (US) 70 l
Engine Oil	9.5 gal (US) 36 l
Transmission - Differential - Final Drives	34 gal (US) 98.5 l
Tandem Housing - Each	34 gal (US) 129 l
Front Wheel Spindle Bearing Housing	0.24 gal (US) 0.9 l
Circle Drive Housing	2.6 gal (US) 10 l

Power Train

Forward/Reverse Gears	8 Forward/6 Reverse 8 Forward/6 Reverse
Transmission	Direct drive, power shift, countershaft Direct drive, power shift, countershaft
Brakes - Dynamic Brake Torque per Wheel	27069.27 lb/ft 36701 N·m
Brakes - Secondary	Oil-actuated, oil-disc Oil-actuated, oil-disc
Brakes - Service	Oil-actuated, oil disc Oil-actuated, oil disc
Brakes - Parking	Spring applied, hydraulically released Spring applied, hydraulically released

Hydraulic System

Circuit Type	Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
Pump Type	Variable piston Variable piston
Maximum System Pressure	3590 psi 24750 kPa
Standby Pressure	856 psi 5900 kPa
Pump Output*	74 gal/min 280 l/min
Note	Pump output measured at 2,150 rpm. Pump output measured at 2,150 rpm.

Blade Range

Maximum Blade Position Angle	65° 65°
Maximum Lift Above Ground	15.7 in 400 mm
Maximum Depth of Cut	18.5 in 470 mm
Maximum Shoulder Reach Outside of Tires - Right	91 in 2311 mm
Moldboard Sideshift - Left	29.1 in 740 mm
Circle Centershift - Right	22 in 560 mm
Circle Centershift - Left	27.2 in 690 mm
Moldboard Sideshift - Right	31.1 in 790 mm
Maximum Shoulder Reach Outside of Tires - Left	91 in 2311 mm
Blade Tip Range - Forward	40° 40°
Blade Tip Range - Backward	5° 5°

Operating Specifications

Steering Range - Left/Right	47.5° 47.5°
Forward - 6th	16 mile/h 25.8 km/h
Forward - 4th	7.6 mile/h 12.3 km/h
Forward - 5th	11.8 mile/h 19 km/h
Turning Radius - Outside Front Tires	30.5 ft 9.3 m
Forward - 7th	22 mile/h 35.5 km/h
Top Speed - Forward	32.1 mile/h 51.7 km/h
Forward - 3rd	5.5 mile/h 8.9 km/h
Reverse - 6th	25.3 mile/h 40.8 km/h
Reverse - 5th	17.4 mile/h 28 km/h
Reverse - 2nd	4.1 mile/h 6.6 km/h
Reverse - 3rd	6 mile/h 9.7 km/h
Forward - 8th	32.1 mile/h 51.7 km/h
Reverse - 1st	2.2 mile/h 3.6 km/h
Forward - 1st	2.8 mile/h 4.5 km/h
Top Speed - Reverse	25.4 mile/h 40.8 km/h
Forward - 2nd	3.8 mile/h 6.1 km/h
Reverse - 4th	9.3 mile/h 15 km/h
Articulation Angle - Left/Right	20Â° 20Â°
Note	Calculated with no slip and 23.5 R25 L-3 tires. Calculated with no slip and 23.5 R25 L-3 tires.

Frame

Front Frame Structure - Height	18.1 in 460 mm
Front Frame Structure - Width	14 in 356 mm
Drawbar - Width	3 in 76 mm
Drawbar - Height	8 in 203 mm
Front Axle - Total Oscillation per Side	35° 35°
Circle - Diameter	71.7 in 1822 mm
Circle - Blade Beam Thickness	2 in 50 mm
Front Frame Structure - Thickness	0.6 in 14 mm
Front Axle - Wheel Lean	18° Left/17° Right 18° Left/17° Right
Front Axle - Height to Center	26.4 in 670 mm

Tandems

Tandem Oscillation - Front Up	15° 15°
Sidewall Thickness - Outer	0.9 in 22 mm
Sidewall Thickness - Inner	0.9 in 22 mm
Tandem Oscillation - Front Down	25° 25°
Height	25.5 in 648 mm
Width	9.3 in 236 mm
Drive Chain Pitch	2.5 in 63.5 mm
Wheel Axle Spacing	72.5 in 1841 mm

Ripper

Ripping Depth - Maximum	17.8 in 452 mm
Shank Holder Spacing - Minimum	17.5 in 445 mm
Shank Holder Spacing - Maximum	20 in 500 mm
Ripper Shank Holders	7 7
Penetration Force	30311 lb 13749 kg
Pry-Out Force	43700 lb 19822 kg
Machine Length Increase, Beam Raised	63.4 in 1610 mm

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

Gross Vehicle Weight - Maximum Tested - Total	84877 lb 38500 kg
Gross Vehicle Weight - Base - Total**	63528 lb 28816 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle	52201 lb 23678 kg
Gross Vehicle Weight - Typically Equipped - Total	71454 lb 32411 kg
Gross Vehicle Weight - Maximum Tested - Front Axle	26125 lb 11850 kg
Gross Vehicle Weight - Typically Equipped - Front Axle	19253 lb 8733 kg
Gross Vehicle Weight - Maximum Tested - Rear Axle	58753 lb 26650 kg
Gross Vehicle Weight - Base - Front Axle**	17932 lb 8134 kg
Gross Vehicle Weight - Base - Rear Axle**	45596 lb 20682 kg
Note (1)	For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note (2)	Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

Dimensions (Approximate)

Ground Clearance - Rear Axle	15.6 in 396 mm
Length - Counterweight to Ripper	474.4 in 12051 mm
Length - Front Axle to Moldboard	120.7 in 3066 mm
Length - Front Axle to Mid Tandem	290 in 7365 mm
Height - Top of Cylinders	121.6 in 3088 mm
Width - Tire Center Lines	106.4 in 2703 mm
Width - Outside Rear Tires	134.3 in 3411 mm
Length - Between Tandem Axles	72.5 in 1841 mm
Height - Top of Cab	146.4 in 3719 mm
Width - Outside Front Tires	134.3 in 3411 mm
Height - Front Axle Center	28.9 in 733 mm
Length - Front Tire to Rear of Machine - Including Tow Hitch	417 in 10593 mm
Height - Exhaust Stack	140 in 3557 mm

Standards

Steering	ISO 5010:2007 ISO 5010:2007
Brakes	ISO 3450:2011 ISO 3450:2011
Sound	ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
ROPS/FOPS	ISO 3471:2008/ISO 3449:2005 ISO 3471:2008/ISO 3449:2005
Note (1)	The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system. The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
Note (2)	The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system. The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

Gear - Reverse 3rd-6th	298 hp 222 kW
Gear - Forward 8th	348 hp 259 kW
Gear - Forward 3rd	298 hp 222 kW
Gear - Forward 6th	320 hp 239 kW
Gear - Forward 5th	311 hp 232 kW
Gear - Reverse 1st	290 hp 216 kW
Gear - Reverse 2nd	290 hp 216 kW
Gear - Forward 4th	304 hp 227 kW
Gear - Forward 7th	328 hp 244 kW
Gear - Forward 1st	290 hp 216 kW
Gear - Forward 2nd	290 hp 216 kW

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

Gear - Forward 4th	309 hp 227 kW
Gear - Reverse 1st	294 hp 216 kW
Gear - Forward 3rd	302 hp 222 kW
Gear - Reverse 3rd-6th	302 hp 222 kW
Gear - Reverse 2nd	294 hp 216 kW
Gear - Forward 7th	332 hp 244 kW
Gear - Forward 6th	325 hp 239 kW
Gear - Forward 8th	353 hp 259 kW
Gear - Forward 1st	294 hp 216 kW
Gear - Forward 5th	315 hp 232 kW
Gear - Forward 2nd	294 hp 216 kW

Optional Tire Arrangements

Wheel Group - 19.5×25 MP (1)	Tires: 23.5R25 Bridgestone VKT 2 Star Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (2)	Tires: 23.5R25 Bridgestone VKT 1 Star Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (3)	Tires: 23.5R25 Bridgestone VJT 1 Star Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)	Tires: 23.5R25 Michelin XHA 2 Star Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)	Tires: 23.5R25 Michelin XLDD 2 Star L5 Tires: 23.5R25 Michelin XLDD 2 Star L5

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

16 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Adjustable Electric Arm rest

Adjustable wrist rest

Air conditioner with heater

Articulation, automatic Return-to-Center

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)

Gauges, machine level

Information display touch screen

Joystick gear selection

Joystick hydraulic controls for implements, steering, transmission

Ladders, cab, left and right side

Lights, left and right side lights

Lights, night time cab

Meter, hour, digital

Mirror, inside rearview, wide angle

Power port, 12V

Radio ready, entertainment

ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)

Seat, cloth-covered, comfort air suspension

Storage compartments

Throttle control, electronic

POWER TRAIN

Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector

Air-to-air after cooler (ATAAC)

Auto Diff Lock

Belt, serpentine, automatic tensioner

Brake wear indication

Brakes, oil disc, four-wheel, hydraulic

Consistent Power to ground

Critically Low Fluid Level Monitoring System

Differential, lock/unlock

Drain, engine oil, high speed

Electronic over speed protection

Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards

Engine, compression brake

Ether starting aid

Fuel tank, fast fill, ground level

Fuel-water separator

Hydraulic Demand Fan

Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)

OK-to-Start

Optimized VHP

Parking brake – multi disc, sealed, oil-cooled

Priming pump, fuel

Rear axle, modular

Sediment drain, fuel tank

Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.

Transmission, 8F/6R, power shift

VIMS no telematics

ELECTRICAL

Alternator, 150 ampere, sealed

Batteries, maintenance free, heavy duty, 1,400 CCA

Breaker panel

Electrical system, 24V

Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front

Product Link

Starter, electric, heavy duty

SAFETY

Alarm, back up

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Lockout, hydraulic implement for roading

Operator not present monitoring System

Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders

Rearview camera

Seat belt indicator

Seat belt, retractable 76 mm (3 in)

Secondary steering

Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)

Windows, tempered: – Left and right side wipers – Rear with intermittent wiper

OTHER STANDARD EQUIPMENT

3-Bolt blade Bracket

AccuGrade ARO

Accumulators, blade lift

Brake accumulators, dual certified

Cat Grade Control Cross Slope

CD ROM Parts Book

Clutch, circle drive slip

Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts

Doors (four), engine compartment, (two left, two right hand) locking

Doors, two service, left and right side

Drawbar – six shoe with replaceable wear strips

End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts

Fast fill fuel, 567.8 L/min (150 gpm)

Fluid check

Frame, articulated, with safety lock

Hydraulics, load-sensing

Metallic Fuel tank, 496 L (131 gal)

Metallic DCM wear strips

Modular cooling package

Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip

Radiator, two cleanout access doors

Rear bumper

Rear tandem access steps and hand bars

S∙O∙S ports: engine, hydraulic, transmission, coolant

Tandem walkway

Top adjust circle wear strips

Tow hitch (not available with ripper)

TIRES, RIMS, AND WHEELS

A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

Extended Life Coolant to –35° C (–31° F)

WORK TOOLS/G.E.T.

4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

16 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Air horn

Comfort package

Heated door

Mirrors high visibility

Mirrors, outside heated 24V

Mirrors, outside mounted

Seat heated

Seat heated/ventilated

Windows cleaning platform and ladders left-right hand side

POWER TRAIN

Transmission, autoshift

GUARDS

Debris guard

Front axle cylinder guard

Rear fenders

Sound suppression, engine enclosure and transmission

Transmission guard

ELECTRICAL

Light, LED, warning strobe

Lights front LED

Lights, front headlights high

Lights, front headlights low

Mounting, for warning light

Service lights

Working lights halogen

Working lights LED

SAFETY

Additional monitor for rearview camera

Enhanced access platform

Fire suppression ready

Machine Security System Key

Service access platform

OTHER ATTACHMENTS

Auto-lube, Centro-matic

Auto-lube, ripper enhancement

Control, blade, variable float

Heater, engine coolant, 120V

Heater, engine coolant, 240V

Hydraulic arrangements with additional hydraulic valves Base+1

Hydraulic arrangements with additional hydraulic valves Base+5

Product Link Elite dual

Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)

Weather, Cold Plus package

WORK TOOLS/G.E.T.

4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)

Push block, counterweight

Ripper, rear

Tooth, ripper

FLUIDS

Coolant, –51° C (–60° F)

Product Specifications for 16

Download Print

Engine

Base Power (1st Gear) - Net	290 hp 216 kW
Engine Model	Cat® C13 Cat® C13
Bore	5.1 in 130 mm
Stroke	6.2 in 157 mm
Speed at Rated Power	2,000 rpm 2,000 rpm
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	12176 ft 3711 m
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	1270 lb/ft 1721 N·m
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4)	1306 lb/ft 1771 N·m
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	1270 lb/ft 1721 N·m
Emissions (2)	Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4)	43% 43%
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent	39% 39%
Standard - Ambient Capability	122 °F 50 °C
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	12973 ft 3954 m
VHP Range - Net - Metric	216-259 kW (294-353 hp) 216-259 kW (294-353 hp)
Base Power (1st Gear) - Net - Metric	294 hp 216 kW
Standard - Fan Speed - Minimum	550 rpm 550 rpm
Standard - Fan Speed - Maximum	1,450 rpm 1,450 rpm
Emissions (3)	Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards â€“ depending on emission standards of specific country
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent	39% 39%
Emissions (1)	U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
VHP Range - Net	216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4)	12500 ft 3810 m
Optimized VHP Range - Net	216-259 kW (290-348 hp) 216-259 kW (290-348 hp)
Displacement	763 in³ 12.5 l
Number of Cylinders	6 6

Weights

Operating Weight - Typically Equipped

71454 lb 32411 kg

Moldboard

Blade Width	16 ft 4.9 m
Arc Radius	16.3 in 413 mm
Throat Clearance	5 in 126 mm
Thickness	1 in 25 mm
End Bit - Width	6 in 152 mm
*Blade Pull - Base GVW**	41039 lb 18615 kg
Cutting Edge Width	8 in 203 mm
Cutting Edge Thickness	1 in 25 mm
Down Force - Maximum GVW	43861 lb 19895 kg
Height	31 in 787 mm
Width	16 ft 4.9 m
Down Force - Base GVW	30743 lb 13945 kg
*Blade Pull - Maximum GVW**	52878 lb 23985 kg
End Bit - Thickness	0.75 in 19 mm
Note	Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

Service Refill

Fuel Capacity	131 gal (US) 496 l
Cooling System	18.5 gal (US) 70 l
DEF Tank	4.2 gal (US) 16 l
Hydraulic System - Total	38.6 gal (US) 146 l
Hydraulic System - Tank	18.5 gal (US) 70 l
Engine Oil	9.5 gal (US) 36 l
Transmission - Differential - Final Drives	34 gal (US) 98.5 l
Tandem Housing - Each	34 gal (US) 129 l
Front Wheel Spindle Bearing Housing	0.24 gal (US) 0.9 l
Circle Drive Housing	2.6 gal (US) 10 l

Power Train

Forward/Reverse Gears	8 Forward/6 Reverse 8 Forward/6 Reverse
Transmission	Direct drive, power shift, countershaft Direct drive, power shift, countershaft
Brakes - Dynamic Brake Torque per Wheel	27069.27 lb/ft 36701 N·m
Brakes - Secondary	Oil-actuated, oil-disc Oil-actuated, oil-disc
Brakes - Service	Oil-actuated, oil disc Oil-actuated, oil disc
Brakes - Parking	Spring applied, hydraulically released Spring applied, hydraulically released

Hydraulic System

Circuit Type	Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
Pump Type	Variable piston Variable piston
Maximum System Pressure	3590 psi 24750 kPa
Standby Pressure	856 psi 5900 kPa
Pump Output*	74 gal/min 280 l/min
Note	Pump output measured at 2,150 rpm. Pump output measured at 2,150 rpm.

Blade Range

Maximum Blade Position Angle	65° 65°
Maximum Lift Above Ground	15.7 in 400 mm
Maximum Depth of Cut	18.5 in 470 mm
Maximum Shoulder Reach Outside of Tires - Right	91 in 2311 mm
Moldboard Sideshift - Left	29.1 in 740 mm
Circle Centershift - Right	22 in 560 mm
Circle Centershift - Left	27.2 in 690 mm
Moldboard Sideshift - Right	31.1 in 790 mm
Maximum Shoulder Reach Outside of Tires - Left	91 in 2311 mm
Blade Tip Range - Forward	40° 40°
Blade Tip Range - Backward	5° 5°

Operating Specifications

Steering Range - Left/Right	47.5° 47.5°
Forward - 6th	16 mile/h 25.8 km/h
Forward - 4th	7.6 mile/h 12.3 km/h
Forward - 5th	11.8 mile/h 19 km/h
Turning Radius - Outside Front Tires	30.5 ft 9.3 m
Forward - 7th	22 mile/h 35.5 km/h
Top Speed - Forward	32.1 mile/h 51.7 km/h
Forward - 3rd	5.5 mile/h 8.9 km/h
Reverse - 6th	25.3 mile/h 40.8 km/h
Reverse - 5th	17.4 mile/h 28 km/h
Reverse - 2nd	4.1 mile/h 6.6 km/h
Reverse - 3rd	6 mile/h 9.7 km/h
Forward - 8th	32.1 mile/h 51.7 km/h
Reverse - 1st	2.2 mile/h 3.6 km/h
Forward - 1st	2.8 mile/h 4.5 km/h
Top Speed - Reverse	25.4 mile/h 40.8 km/h
Forward - 2nd	3.8 mile/h 6.1 km/h
Reverse - 4th	9.3 mile/h 15 km/h
Articulation Angle - Left/Right	20Â° 20Â°
Note	Calculated with no slip and 23.5 R25 L-3 tires. Calculated with no slip and 23.5 R25 L-3 tires.

Frame

Front Frame Structure - Height	18.1 in 460 mm
Front Frame Structure - Width	14 in 356 mm
Drawbar - Width	3 in 76 mm
Drawbar - Height	8 in 203 mm
Front Axle - Total Oscillation per Side	35° 35°
Circle - Diameter	71.7 in 1822 mm
Circle - Blade Beam Thickness	2 in 50 mm
Front Frame Structure - Thickness	0.6 in 14 mm
Front Axle - Wheel Lean	18° Left/17° Right 18° Left/17° Right
Front Axle - Height to Center	26.4 in 670 mm

Tandems

Tandem Oscillation - Front Up	15° 15°
Sidewall Thickness - Outer	0.9 in 22 mm
Sidewall Thickness - Inner	0.9 in 22 mm
Tandem Oscillation - Front Down	25° 25°
Height	25.5 in 648 mm
Width	9.3 in 236 mm
Drive Chain Pitch	2.5 in 63.5 mm
Wheel Axle Spacing	72.5 in 1841 mm

Ripper

Ripping Depth - Maximum	17.8 in 452 mm
Shank Holder Spacing - Minimum	17.5 in 445 mm
Shank Holder Spacing - Maximum	20 in 500 mm
Ripper Shank Holders	7 7
Penetration Force	30311 lb 13749 kg
Pry-Out Force	43700 lb 19822 kg
Machine Length Increase, Beam Raised	63.4 in 1610 mm

Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*

Gross Vehicle Weight - Maximum Tested - Total	84877 lb 38500 kg
Gross Vehicle Weight - Base - Total**	63528 lb 28816 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle	52201 lb 23678 kg
Gross Vehicle Weight - Typically Equipped - Total	71454 lb 32411 kg
Gross Vehicle Weight - Maximum Tested - Front Axle	26125 lb 11850 kg
Gross Vehicle Weight - Typically Equipped - Front Axle	19253 lb 8733 kg
Gross Vehicle Weight - Maximum Tested - Rear Axle	58753 lb 26650 kg
Gross Vehicle Weight - Base - Front Axle**	17932 lb 8134 kg
Gross Vehicle Weight - Base - Rear Axle**	45596 lb 20682 kg
Note (1)	For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note (2)	Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

Dimensions (Approximate)

Ground Clearance - Rear Axle	15.6 in 396 mm
Length - Counterweight to Ripper	474.4 in 12051 mm
Length - Front Axle to Moldboard	120.7 in 3066 mm
Length - Front Axle to Mid Tandem	290 in 7365 mm
Height - Top of Cylinders	121.6 in 3088 mm
Width - Tire Center Lines	106.4 in 2703 mm
Width - Outside Rear Tires	134.3 in 3411 mm
Length - Between Tandem Axles	72.5 in 1841 mm
Height - Top of Cab	146.4 in 3719 mm
Width - Outside Front Tires	134.3 in 3411 mm
Height - Front Axle Center	28.9 in 733 mm
Length - Front Tire to Rear of Machine - Including Tow Hitch	417 in 10593 mm
Height - Exhaust Stack	140 in 3557 mm

Standards

Steering	ISO 5010:2007 ISO 5010:2007
Brakes	ISO 3450:2011 ISO 3450:2011
Sound	ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
ROPS/FOPS	ISO 3471:2008/ISO 3449:2005 ISO 3471:2008/ISO 3449:2005
Note (1)	The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system. The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
Note (2)	The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system. The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net

Gear - Reverse 3rd-6th	298 hp 222 kW
Gear - Forward 8th	348 hp 259 kW
Gear - Forward 3rd	298 hp 222 kW
Gear - Forward 6th	320 hp 239 kW
Gear - Forward 5th	311 hp 232 kW
Gear - Reverse 1st	290 hp 216 kW
Gear - Reverse 2nd	290 hp 216 kW
Gear - Forward 4th	304 hp 227 kW
Gear - Forward 7th	328 hp 244 kW
Gear - Forward 1st	290 hp 216 kW
Gear - Forward 2nd	290 hp 216 kW

Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric

Gear - Forward 4th	309 hp 227 kW
Gear - Reverse 1st	294 hp 216 kW
Gear - Forward 3rd	302 hp 222 kW
Gear - Reverse 3rd-6th	302 hp 222 kW
Gear - Reverse 2nd	294 hp 216 kW
Gear - Forward 7th	332 hp 244 kW
Gear - Forward 6th	325 hp 239 kW
Gear - Forward 8th	353 hp 259 kW
Gear - Forward 1st	294 hp 216 kW
Gear - Forward 5th	315 hp 232 kW
Gear - Forward 2nd	294 hp 216 kW

Optional Tire Arrangements

Wheel Group - 19.5×25 MP (1)	Tires: 23.5R25 Bridgestone VKT 2 Star Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (2)	Tires: 23.5R25 Bridgestone VKT 1 Star Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (3)	Tires: 23.5R25 Bridgestone VJT 1 Star Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)	Tires: 23.5R25 Michelin XHA 2 Star Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)	Tires: 23.5R25 Michelin XLDD 2 Star L5 Tires: 23.5R25 Michelin XLDD 2 Star L5

Air Conditioning System

Air Conditioning

16 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Adjustable Electric Arm rest

Adjustable wrist rest

Air conditioner with heater

Articulation, automatic Return-to-Center

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)

Gauges, machine level

Information display touch screen

Joystick gear selection

Joystick hydraulic controls for implements, steering, transmission

Ladders, cab, left and right side

Lights, left and right side lights

Lights, night time cab

Meter, hour, digital

Mirror, inside rearview, wide angle

Power port, 12V

Radio ready, entertainment

ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)

Seat, cloth-covered, comfort air suspension

Storage compartments

Throttle control, electronic

POWER TRAIN

Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector

Air-to-air after cooler (ATAAC)

Auto Diff Lock

Belt, serpentine, automatic tensioner

Brake wear indication

Brakes, oil disc, four-wheel, hydraulic

Consistent Power to ground

Critically Low Fluid Level Monitoring System

Differential, lock/unlock

Drain, engine oil, high speed

Electronic over speed protection

Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards

Engine, compression brake

Ether starting aid

Fuel tank, fast fill, ground level

Fuel-water separator

Hydraulic Demand Fan

Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)

OK-to-Start

Optimized VHP

Parking brake – multi disc, sealed, oil-cooled

Priming pump, fuel

Rear axle, modular

Sediment drain, fuel tank

Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.

Transmission, 8F/6R, power shift

VIMS no telematics

ELECTRICAL

Alternator, 150 ampere, sealed

Batteries, maintenance free, heavy duty, 1,400 CCA

Breaker panel

Electrical system, 24V

Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front

Product Link

Starter, electric, heavy duty

SAFETY

Alarm, back up

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Lockout, hydraulic implement for roading

Operator not present monitoring System

Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders

Rearview camera

Seat belt indicator

Seat belt, retractable 76 mm (3 in)

Secondary steering

Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)

Windows, tempered: – Left and right side wipers – Rear with intermittent wiper

OTHER STANDARD EQUIPMENT

3-Bolt blade Bracket

AccuGrade ARO

Accumulators, blade lift

Brake accumulators, dual certified

Cat Grade Control Cross Slope

CD ROM Parts Book

Clutch, circle drive slip

Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts

Doors (four), engine compartment, (two left, two right hand) locking

Doors, two service, left and right side

Drawbar – six shoe with replaceable wear strips

End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts

Fast fill fuel, 567.8 L/min (150 gpm)

Fluid check

Frame, articulated, with safety lock

Hydraulics, load-sensing

Metallic Fuel tank, 496 L (131 gal)

Metallic DCM wear strips

Modular cooling package

Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip

Radiator, two cleanout access doors

Rear bumper

Rear tandem access steps and hand bars

S∙O∙S ports: engine, hydraulic, transmission, coolant

Tandem walkway

Top adjust circle wear strips

Tow hitch (not available with ripper)

TIRES, RIMS, AND WHEELS

A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

Extended Life Coolant to –35° C (–31° F)

WORK TOOLS/G.E.T.

4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

16 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Air horn

Comfort package

Heated door

Mirrors high visibility

Mirrors, outside heated 24V

Mirrors, outside mounted

Seat heated

Seat heated/ventilated

Windows cleaning platform and ladders left-right hand side

POWER TRAIN

Transmission, autoshift

GUARDS

Debris guard

Front axle cylinder guard

Rear fenders

Sound suppression, engine enclosure and transmission

Transmission guard

ELECTRICAL

Light, LED, warning strobe

Lights front LED

Lights, front headlights high

Lights, front headlights low

Mounting, for warning light

Service lights

Working lights halogen

Working lights LED

SAFETY

Additional monitor for rearview camera

Enhanced access platform

Fire suppression ready

Machine Security System Key

Service access platform

OTHER ATTACHMENTS

Auto-lube, Centro-matic

Auto-lube, ripper enhancement

Control, blade, variable float

Heater, engine coolant, 120V

Heater, engine coolant, 240V

Hydraulic arrangements with additional hydraulic valves Base+1

Hydraulic arrangements with additional hydraulic valves Base+5

Product Link Elite dual

Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)

Weather, Cold Plus package

WORK TOOLS/G.E.T.

4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)

Push block, counterweight

Ripper, rear

Tooth, ripper

FLUIDS

Coolant, –51° C (–60° F)

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Edge

Equipment Management

Fleet

Grade

Health

Terrain

Cat MineStar Edge

Cat® MineStar Edge™ is a technology platform that delivers more connected, integrated, scalable and intuitive products that extend further up and down the value chain. Edge makes it possible for you to use proven MineStar technologies across your entire mining organization and creates an operational ecosystem that provides visibility to every aspect of your operation. Edge delivers near-real-time access to data that was up to 98% accurate and enables you to make changes in-shift while already knowing the impact those changes will have further down the value chain?

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® MineStar Edge™ is a technology platform that delivers more connected, integrated, scalable and intuitive products that extend further up and down the value chain. Edge makes it possible for you to use proven MineStar technologies across your entire mining organization and creates an operational ecosystem that provides visibility to every aspect of your operation. Edge delivers near-real-time access to data that was up to 98% accurate and enables you to make changes in-shift while already knowing the impact those changes will have further down the value chain?

Explore Technology

Cat Inspect

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
Cat Product Link

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology
Cat Remote Flash

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology
VisionLink®

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology

Remote Flash sends an alert from your Cat dealer, prompting you to update the software on your machine. To minimize downtime, updates can be deployed while on the jobsite without having to wait for a dealer technician to arrive. Remote flash decreases maintenance time and keeps your asset running with maximum efficiency.

Explore Technology

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Fleet for Surface

Cat® MineStar Fleet is the single best source for fleet management information. An integrated fleet monitoring and management system, it can be used with any machine or system to measure, manage and maximize every facet of an operation, no matter the size or type. Fleet provides real-time visibility to cycle time, payload and other key operational parameters. It monitors machine locations and material movement and provides alerts of misroutes to ensure material is moved to the proper location.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® MineStar Fleet is the single best source for fleet management information. An integrated fleet monitoring and management system, it can be used with any machine or system to measure, manage and maximize every facet of an operation, no matter the size or type. Fleet provides real-time visibility to cycle time, payload and other key operational parameters. It monitors machine locations and material movement and provides alerts of misroutes to ensure material is moved to the proper location.

Explore Technology

Cat Grade with Cross Slope for Motor Graders

Cat® Grade with Cross Slope is an integrated system that enables motor grader operators to achieve grade faster and more accurately by automating the cross slope of the blade, allowing the operator to do more in the same amount of time. Other cost-saving benefits of the system include lower fuel consumption and up to 40% less material usage.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Grade with Cross Slope is an integrated system that enables motor grader operators to achieve grade faster and more accurately by automating the cross slope of the blade, allowing the operator to do more in the same amount of time. Other cost-saving benefits of the system include lower fuel consumption and up to 40% less material usage.

Explore Technology

Cat Health

Through regular monitoring of machine conditions, mines can adopt a more proactive approach to maintenance and repair. Equipment health data is a key contributor to that approach. Data helps mines identify equipment problems long before failure.

Accessing the right data at the right time is critical to improving operational intelligence and machine predictive analysis. Cat® MineStar™ Health helps you meet that need by connecting you to your machines and delivering that important information. The MineStar Health portfolio set consists of Connectivity Enablers that collect, convert and transmit equipment data; and Applications that visualize, analyze and report health equipment data.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Through regular monitoring of machine conditions, mines can adopt a more proactive approach to maintenance and repair. Equipment health data is a key contributor to that approach. Data helps mines identify equipment problems long before failure.

Accessing the right data at the right time is critical to improving operational intelligence and machine predictive analysis. Cat® MineStar™ Health helps you meet that need by connecting you to your machines and delivering that important information. The MineStar Health portfolio set consists of Connectivity Enablers that collect, convert and transmit equipment data; and Applications that visualize, analyze and report health equipment data.

Explore Technology

Cat Terrain for Grading

Grading is a vital but less visible function that provides essential support for loading and hauling operations. Cat® MineStar™ Terrain for grading helps make dozer and motor grader operations safer and more efficient, which can make a significant difference to a mine site’s bottom line. Terrain for grading helps operators get to the specified grade more quickly without surveying, guesswork or rework.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Grading is a vital but less visible function that provides essential support for loading and hauling operations. Cat® MineStar™ Terrain for grading helps make dozer and motor grader operations safer and more efficient, which can make a significant difference to a mine site’s bottom line. Terrain for grading helps operators get to the specified grade more quickly without surveying, guesswork or rework.

Explore Technology