Technical Summary
| Rating Range | 30 - 3000 A 30 - 3000 A |
| Transfer Type | Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT) Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT) |
| Switch Type | Contactor Contactor |
HMI unit, type CS color touchscreen with Ekip Programming module
Contact wear monitoring, including real-time status and predicted contact end-of-life
Fast controller response to outage recovery and fast switching (<50ms)
ATS TruOne - TruControl Cat® CS Series
Request A Price Find DealerKey Specs
- Rating Range
- 30 - 3000 A
- 30 - 3000 A
- Transfer Type
- Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
- Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
- Switch Type
- Contactor
- Contactor
Overview
Cat® CS Series
The CS Series – Contactor-type, Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT) ATS is equipped with an intuitive full-color touchscreen HMI and is compatible with Ekip Connect software for commissioning and operation.
The CS Series has an array of standard programmable functions and is built for high performance and service with proactive outage mitigation that monitors temperature and contact health.
Benefits
HMI unit, type CS color touchscreen with Ekip Programming module
Contact wear monitoring, including real-time status and predicted contact end-of-life
Fast controller response to outage recovery and fast switching (<50ms)
Features At A Glance
- Voltage and frequency sensing of both sources and load
- USB port to upload/download settings
- Available Bluetooth connection and enhanced communication capabilities
- Password protection color touchscreen HMI
- Integrated help button and menu
- Five programmed packages and IO
- Contact wear monitoring including real-time status and predicted contact end-of-life (30-1200A only)
- Fast controller response to outage recovery and fast switching (<50ms)
- TruOne L4 - color touchscreen HMI compatible with Ekip Connect software, with standard programmable functions and IO, and fast controller response to outage recovery and fast switching (<50ms).
- High current protection and alarm
- Wide 200-480V range with auto-configuration of system settings for 30-1200A range
- High time-based withstand and closing ratings (WCR)
- Short-time withstand ratings in every frame (CS, CSD, and CSCT models)
- UL 1008, NFPA 70, 99, 101 and 110
- NEMA ICS 10
- cUL
- Conducted and radiated emissions - CISPR 11:2009, Class A
- ESD immunity test - IEC/EN 61000-4-2 Class B
- Radiated RF, electromagnetic field immunity test - IEC/EN 61000-4-3 10 V/m
- Electrical fast, transient/burst immunity test - IEC/EN 61000-4-4
- Surge immunity test - IEC/EN 61000-4-5 0.5 to 2 kV
- Conducted immunity test - IEC/EN 61000-4-6
- Voltage dips and interruption immunity - IEC/EN 61000-4-11
- Harmonic voltage immunity test - IEC/EN 6100-4-13
Product Specifications for Cat® CS Series
System Information
| Product nodes | UL: 30-200 A, 260-1200 A, 1600-3000 A UL: 30-200 A, 260-1200 A, 1600-3000 A |
| Rated Voltage and Frequency | 200-480VAC, 50/60 Hz 200-480VAC, 50/60 Hz |
| Phase system | Single and Three Single and Three |
| Number of poles | 2, 3 and 4 2, 3 and 4 |
| Neutral configuration | Solid neutral, Switched neutral, (Optional) Overlapping neutral Solid neutral, Switched neutral, (Optional) Overlapping neutral |
| Product type | Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II) 1600-3000A only Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II) 1600-3000A only |
Cat® CS Series Standard Equipment
Control
- Color touchscreen
- Voltage and frequency settings: Pick up and Drop out
- Time Delay Settings: Override momentary, Transfer, Generator stop, Center-OFF (Delayed Transition Type), Pre-transfer, Post-transfer, Elevator Pre-signal, Elevator Post-signal, and Load shead.
- Source failure detections: No Voltage, Under/Over Voltage, Phase missing, Voltage unbalance, Invalid frequency, and Incorrect phase sequence
Additional Features
- LED indications for ATS, S1 and S2 status
- Programmable digital inputs/outputs
- Auto config (voltage, frequency, phase system)
- Source priority (Source 1/2, No priority)
- Manual re-transfer
- In-phase monitor (synchro check)
- Genset exercising: on-load, off-load
- In-built power meter module
- Load shedding
- Real time clock
- Event log
- Predictive maintenance
- Voltage and current harmonics measuring
Accessories
- Auxiliary contacts for position indication
- Digital input/output modules (factory programmed)
- 12-24 VDC aux supply module for controller
- Communication modules
Connectivity Capability
- Modbus RTU (RS-485)
- Modbus/TCP
- Profibus DP
- ProfiNet Yes
- DeviceNet
- Ethernet IP
Applications
- Utility - Utility
- Utility - Generator
UL short circuit withstand ratings
- Coordinated breaker WCR
- Time-based WCR
- Short-time ratings
assignment Product Brochures and More Are Ready to Download!
Caterpillar product brochures and other informational documents are available for your growing business.
See how Cat® CS Series compares against frequently compared products.
electric-power
Cat® CS Series
Selected
- Rating Range
- 30 - 3000 A
- 30 - 3000 A
- Transfer Type
- Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
- Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
- Switch Type
- Contactor
- Contactor
electric-power
Cat® CG Series
- Rating Range
- 30 - 3000 A
- 30 - 3000 A
- Transfer Type
- Open Transition (CG), Delayed Transition (CGD)
- Open Transition (CG), Delayed Transition (CGD)
- Switch Type
- Contactor
- Contactor
electric-power
Cat® CBS Series
- Rating Range
- 100 - 3000 A
- 100 - 3000 A
- Transfer Type
- Open Transition (CBS), Delayed Transition (CBSD), Closed Transition (CBSCT), with Bypass Isolation
- Open Transition (CBS), Delayed Transition (CBSD), Closed Transition (CBSCT), with Bypass Isolation
- Switch Type
- Contactor
- Contactor
