Manufacturing
Cat® G3412C CHP System Powers Connecticut Manufacturer PEPCO
Cat® dealer, H.O. Penn, partners with their customer, Plainville Electrical Products Company, to save on utility costs while developing new control systems in Bristol, Connecticut.
CHP SYSTEM PACKAGES
Caterpillar provides customized CHP system package proposals, including the required mechanical equipment and controls to capture and transfer the engine thermal energy to an industrial facility. In addition, Caterpillar offers exhaust emissions aftertreatment for highly regulated emission environments and utility grade Cat paralleling switchgear to sell excess electricity generated to the local electric grid.
GAS STANDBY POWER SYSTEMS
There has been an increasing move toward natural gas fueled standby power systems in recent years. Typically installed with an automatic transfer switch (ATS) or paralleling switchgear control for multiple generators, these power systems sense utility outages and automatically start the backup power system and transfer power to the emergency source. When normal grid power returns, the control system automatically shuts down the emergency generator.
Testimonials
-
Puratos Supports Corporate Sustainability Initiatives with Cogeneration
Puratos offers a full range of innovative products and application expertise for artisans, industry, retailers, and food service customers. To help minimize its impact on the environment, Puratos acquired a cogeneration system to supply power and heat for operations for its headquarters and manufacturing operations.
Learn More -
Cat® Generators Help Company Overcome Power Uncertainties
When Nexperia Philippines, Inc. began to worry about the damage a prolonged power outage could do to the materials in its warehouse, it looked to Cat® dealer Monark Equipment Corporation to install and commission two Cat C13 diesel generator sets to deliver reliable power to its facilities.
Learn More -
W.R. Grace Depends On Cogeneration To Offset Energy Costs
The W.R. Grace & Co. Curtis Bay facility runs 24/7, producing catalysts and silicas for a variety of applications. When aging infrastructure caused power to become unreliable at the plant, the company turned to its Cat® dealer to commission a combined heat and power (CHP) system powered by two Cat generator sets to supply reliable power and lower energy costs.
Learn More -
Zakrzewscy Controls Energy Costs With Cat® Power System
Based in Kosów Lacki, Poland, the Zakrzewscy Meat Processing Plant sought a new energy source after electricity prices on the Polish energy market skyrocketed. Working with local Cat® dealer Eneria Cat, Zakrzewscy installed a Cat generator set and combined heat and power system to insulate the plant from unstable utility costs.
Learn More
Products Featured in Customer Stories
-
- Standby Rating
- 3000 ekW
- 3000 ekW
- Prime Power Rating
- 2725 ekW
- 2725 ekW
- Emissions/Fuel Strategy
- Tier 2
- Tier 2
3516E (60 Hz)
The 3516E diesel generator sets have been developed to meet your standby and prime applications and match your power standards. Producing reliable power from 2725 to 3000 ekW at 60 Hz, each generator set has been designed to meet ISO 8528-5 transient response requirements and to accept 100 % rated load in one step. The generator set is US EPA Stationary Emergency Use Only (Tier 2) certified.
Learn More- Maximum Rating
- 400 ekW
- 400 ekW
- Minimum Rating
- 320 ekW
- 320 ekW
- Emissions/Fuel Strategy
- EPA Stationary Emerg Use
- EPA Stationary Emerg Use
C13 (60 Hz)
The C13 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 320 to 400 ekW at 60 Hz, each generator set has been designed to meet ISO 8528-5 transient response requirements and built to accept 100 % rated load in one step. Our C13 generator sets are certified to Low Fuel Consumption Emissions / Fuel Strategy.
Learn More- Maximum Rating
- 1250 ekW
- 1250 ekW
- Minimum Rating
- 830 ekW
- 830 ekW
- Emissions/Fuel Strategy
- Low Fuel, Tier 2 Nonroad Stds
- Low Fuel, Tier 2 Nonroad Stds
C32 (60 Hz)
Producing reliable power from 830 to 1250 ekW at 60 Hz, our C32 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. Generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certification.
Learn More- Continuous Rating
- 2519 / 2500 ekW @ 1.0pf
- 2519 / 2500 ekW @ 1.0pf
- Fuel Type
- Natural Gas, Hydrogen Blend (up to 25%)
- Natural Gas, Hydrogen Blend (up to 25%)
- Maximum Electrical Efficiency
- 45.30%
- 45.30%
G3520H
From natural gas to biogas, coal mine gases, or hydrogen fuel blends to support combined heat and power (CHP), emergency power, and local grid support applications, Caterpillar has a wide range of reliable gas power solutions.
Learn More
