1of

Minexpo 2020 Postponed

Minexpo 2020 Postponed

Due to the COVID-19 pandemdic, Minexpo will be held one year later in September 2021

MORE DETAILS

Minexpo 2021 New Date

Minexpo 2021 New Date

New date for Minexpo 20201 is August 1-August 5 20201

MORE DETAILS2

Latest Offers 2021

Latest Offers 2021

See the Latest Offers from CAT

SEE OFFERS
C280-12 Offshore Generator Set

Offshore Drilling and Production Generator Sets C280-12

Request A Price Find Dealer

Key Specs

Minimum Rating
4640 kV·A
3460 ekW
Maximum Rating
5444 kV·A
4060 ekW
Emissions
IMO Tier II/EPA Marine Tier 2
IMO Tier II/EPA Marine Tier 2

Overview

The C280-12 generator set incorporates years of proven success of the 3600 engine with the latest technology in electronics. The result is a fully integrated solution that is ideal for offshore operations. Ideal applications for the C280-12 offshore generator set are main power on-board drilling and production vessels and platforms. These include jackup rigs, semi-submersible rigs, and production platforms. Complete package offerings are MCS type-approved and compliant with IMO Tier II emissions standards, making integration of the Cat C280-12 generator set into the vessel a simplified operation. The redundant ADEM A4 engine control system works together with the Cat Alarm and Protection to bring comprehensive generator set control, safety, and simple operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C280-12 offshore generator set. Ratings: 3300-3880 ekW @ 50/60 Hz (1000/900 rpm). IMO Tier II emissions compliant.

Product Specifications for C280-12

Minimum Rating 4640 kV·A 3460 ekW
Maximum Rating 5444 kV·A 4060 ekW
Emissions IMO Tier II/EPA Marine Tier 2 IMO Tier II/EPA Marine Tier 2
Weight 124561 lb 56500 kg
Bore 11 in 300 mm
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Generator Set Control Cat® Alarm and Protection System Cat® Alarm and Protection System
Fuel System EUI EUI
Oil Change Interval 1000 h 1000 h
Engine Control Dual ADEM™ A4 Dual ADEM™ A4
Displacement 13546 in³ 222 l
Stroke 11.8 in 300 mm
Length 319.9 in 8125 mm
Height 156.4 in 3973 mm
Width 101.1 in 2568 mm
Lube Oil System - Refill 339 gal (US) 1283 l
Cooling System - Engine 329 gal (US) 1245 l

C280-12 Standard Equipment

Product Consist

  • The engine is a turbocharged, aftercooled, four-strokecycle- diesel, electronic unit injection engine with a 280 mm (11 in) bore by 300 mm (11.8 in) stroke. SAE standard rotation is counterclockwise as viewed from the rear of engine flywheel.

Emissions Certifications

  • GL and CCS approved IMO certificate — includes statement of compliance or Engine International Air Pollution Prevention (EIAPP) certificate, supplied by the Recognized Organization (RO) where available, and technical file to be kept on board per IMO regulations.

Marine Certification Society type-approval

  • ABS, BV, CCS, DnV, GL, LRS
  • Spray shielding to meet SOLAS regulations for flammable fluids

European Certifications

  • Declaration of Incorporation for EU Machinery Safety
  • Directive and EU Low Voltage Safety Directive

Air Inlet System

  • Fresh water aftercooler, corrosion resistant coated (air side)
  • Air inlet shutoff
  • Turbochargers (2), rear-mounted, oil lubricated
  • 90° adapter and straight adapters for air inlet to turbocharger
  • Air cleaners
  • Air cleaners with Cat dry paper filter elements (approximately 99.9% efficient at filtering SAE fine dust)

Control System

  • Dual Cat ADEM A4 electronic engine control module with electronic unit injector fuel system, rigid wiring harness (10 amp 24V power required to drive electronic engine control modules), direct rack control

Cooling System

  • Gear-driven jacket water (JW) pump
  • Gear-driven separate-circuit aftercooler/oil cooler (AC/OC) pump
  • Front-mounted water connections: JW and AC/OC, 6" ANSI
  • Jacket Water Thermostat Options:
  • AC/OC Thermostat Options:
  • Expansion Tank Options:

Exhaust System

  • Dry, gas tight exhaust manifold
  • Dual turbocharger, rear-mounted
  • Dual wastegate; hard shielding - SOLAS compliant
  • Exhaust manifold shields

Fuel System

  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38°C); fuel pump, gear-driven; fuel transfer pump (mounted on left-hand side); duplex fuel filters, rear-engine-mounted; electronically controlled unit injectors
  • ; crankcase breathers, top-mounted; turbochargers (2), front-mounted, oil lubricated

Lube System

  • Centrifugal oil filters and lines with single shutoff - RH mounted on cylinder block inspection covers, serviceable with the engine running
  • Oil pump, gear-driven
  • Oil filler and dipstick - located in base integrated tank
  • Oil pressure regulating valve
  • Duplex oil filter - accessory module mounted
  • Off engine mounted oil cooler - DTO quote required for package connections
  • Base integrated tank - DTO required
  • Electric continuous prelube pump
  • Redundant prelube with continuous electric prelube
  • Intermittent air prelube backup

Protection System

  • Flywheel and damper guards
  • Crankcase explosion relief valves

Instrumentation

  • Cat Alarm and Protection System Features:

Starting System

  • TDI dual air starting motors, LH rear
  • Shutoff valve
  • Two integrated relay valves with built-in screen #40 mesh and solenoid
  • Air pressure sensor, monitored by Cat Alarm and Protection System - requires customer wiring
  • Maximum operating (dynamic) pressure: 10 bar (150 psi)
  • Maximum static pressure: 14 bar (200 psi)
  • 3-inch ANSI flange customer connection; requires customer-provided 3-inch supply air line from receiver or regulator to air starter and flex connection; if regulator is used, Cv of 40 or greater is required
  • Pressure reducing valve

Mounting System

  • Design-To-Order (DTO) base

General

  • Generator panel
  • Torsional coupling
  • Engine barring device options:

C280-12 Optional Equipment

Air Inlet System

  • Soot filter
  • Air cleaner support bracket

Cooling System

  • Jacket water heater
  • ANSI connection adapters

Exhaust System

  • Flexible exhaust fittings
  • Weld flanges

Fuel System

  • Manual fuel priming pump
  • Duplex primary fuel strainer

Lube System

  • Lube oil heater

Protection System

  • Cylinder pressure relief valve
  • Spray shielding
  • Oil mist detector

Mounting System

  • Vertically-restrained vibration isolators and weld plates

General

  • Accessory module - Front mounted for mounting expansion tank, heat exchanger, instrument panel, annunciator panel, alarm and shutdown contactors, and fuel strainer
  • Engine testing — certified dynamometer test, fuel consumption test, rated speed performance test, overload test, minimum power setting, peak firing pressure test, turbo work certificates, crankshaft work certificates, standard and project-specific witness testing
  • Spare parts kit
  • Engine lifting eyes

Literature

  • Project-specific installation drawings
  • Electrical schematics and P&ID drawings

See how C280-12 compares against frequently compared products.

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Product Brochures and More Are Ready to Download!

Media Gallery

C280-12 Offshore Generator Set

C280-12 Offshore Generator Set

Check out current offers for the C280-12

View More Offers
warning

Internet Explorer users may experience issues with certain features of our site.
Please try a current version of an alternate browser (i.e. Google Chrome, Microsoft Edge, Mozilla Firefox) for the full Cat.com experience.