C1.1 China NR4

Industrial Diesel Engines C1.1 China NR4


Key Specs

Maximum Power
24.6 hp
18.4 kW
Maximum Torque
63.4 lb-ft @ 1600 rpm
86 Nm @ 1600 rpm
Emissions
China Nonroad Stage IV
China Nonroad Stage IV

Overview

The C1.1 and C1.1T are indirect injection industrial diesel engines meeting China Nonroad Stage IV emission standards without the need for electronic control, aftertreatment or exhaust gas recirculation. Available as naturally aspirated or turbocharged for improved low speed torque, we also offer a range of factory configurable options to minimize the cost of machine development and of manufacturing if equipped with e-controller

Product Specifications for C1.1 China NR4

Maximum Power 24.6 hp 18.4 kW
Maximum Torque 63.4 lb-ft @ 1600 rpm 86 Nm @ 1600 rpm
Rated Speed 2400 rpm 2400 rpm
Minimum Power 24.6 hp 18.4 kW
Emissions China Nonroad Stage IV China Nonroad Stage IV
Engine Configuration In-line-3 In-line-3
Bore 3 in 77 mm
Stroke 3.2 in 81 mm
Displacement 67.1 in³ 1.13 l
Compression Ratio 22.1:1 22.1:1
Aspiration Naturally Aspirated (NA)/Turbocharged (T) Naturally Aspirated (NA)/Turbocharged (T)
Combustion System indirect injection indirect injection
Rotation from Flywheel End counterclockwise counterclockwise
Total Lubricating Oil Capacity 1.16 gal (US) 4.4 l
Length 19.6 in 500 mm
Width 20.1 in 513 mm
Height 23.1 in 588 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 211 lb 96 kg

C1.1 China NR4 Standard Equipment

Air inlet system

  • Inlet manifold with choice of inlets

Air Inlet System

  • Inlet manifold with choice of inlets.

Control System

  • Alternator 12 volt 65 amp
  • Starter motor 12 volt
  • Glow plug starting aid

Cooling System

  • Belt-driven coolant pump
  • Coolant temperature switch

Flywheel and Flywheel Housing

  • SAE No. 6 1/2 flywheel
  • Choice of SAE No. 5 or standard backplate flywheel housing
  • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel

Fuel System

  • Fuel injection pump
  • Spin-on fuel filter

Lube System

  • Low profile oil pan
  • Spin-on lube oil filter
  • Lube oil pressure switch

Power Take Off (PTO)

  • Provision for Power Take Off (PTO)

General

  • Cast iron, engine block
  • Cast iron exhaust manifold--side outlet
  • Cold start capability to -20° C (-4° F)
  • Paint: Caterpillar yellow, with optional colors available at request

See how C1.1 China NR4 compares against frequently compared products.

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

By sharing your information you’re giving Caterpillar permission to process your data to appropriately fulfill your request. Depending on your request, we may need to share your data with applicable dealers, within the Caterpillar group of companies, and applicable service providers operating on Caterpillar's behalf. Taking care of your information is a responsibility we take seriously. Our Website Privacy Notice details our data privacy practices and your rights to control your personal data.

*Marketing Consent

Check out current offers for the C1.1 China NR4

View More Offers