C2.8 Industrial Power Unit

Industrial Diesel Power Units C2.8

Request A Price Find Dealer

Key Specs

Maximum Power
74 HP
55 kW
Maximum Torque
221 lb-ft @ 1600 rpm
300 Nm @ 1600 rpm
Emissions
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)

Overview

The C2.8 and C3.6 IPU engines are common rail direct injection engines with a turbocharged or turbocharged aftercooled air system meeting EU Stage V, U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emission standards. For ease of installation, the IPU provides full aftertreatment mounting, an integrated cooling system, a full wiring harness and mounting for the ECM and fuel filter.

Product Specifications for C2.8

Maximum Power 74 HP 55 kW
Maximum Torque 221 lb-ft @ 1600 rpm 300 Nm @ 1600 rpm
Rated Speed 2200-2400 rpm 2200-2400 rpm
Minimum Power 74 HP 55 kW
Emissions EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final) EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
Number of Cylinders 4 inline 4 inline
Cycle 4 stroke 4 stroke
Bore 3.54 in 90 mm
Stroke 4.33 in 110 mm
Displacement 170.9 in³ 2.8 l
Compression Ratio 17.0:1 17.0:1
Aspiration Turbocharged Turbocharged
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Aftertreatment DOC+DPF DOC+DPF
Cooling System Liquid Liquid
Length 46.9 in 1191 mm
Width 31.9 in 809 mm
Height 38 in 966 mm
Dry Weight 1126 lb 511 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options

C2.8 Standard Equipment

Aftertreatment Equipment

  • Aftertreatment mounted on engine as standard

Air System

  • Standard and heavy duty air cleaners

Cooling System

  • 50:50 water glycol mix
  • Detailed guidance on cooling system design and validation available to ensure machine reliability
  • Engine mounted radiator with top tank temperature of 108°C (226°F)
  • Pusher or puller fan options
  • Radiator erosion screen is available

Electrical and Electronics

  • 12V system
  • Data interface via CANbus J1939
  • Instrument control panel available
  • Full electronic control
  • Glow plugs for best cold starting with minimum battery impact
  • High power alternator and starter motor options
  • Sensors and robust wiring harness included

Flywheel and Flywheel Housing

  • SAE3 flywheel housing and flywheel with pilot bore
  • Wide choice of interfaces for common transmissions and hydraulic pumps

Fuel System

  • Electronic high pressure common rail
  • Fuel filter - IOPU mounted
  • Standard and heavy duty fuel filtration
  • Water sensor included - early warning for operator

General

  • Cold-start capable with standard equipment to -25°C
  • Supplied painted or lacquered

Oil System

  • Oil filters - mounting options available on either side of the engine, plus remote
  • Dipsticks - choice of position and length
  • High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes

Power Take-Off (PTO)

  • SAE-A and SAE-B interfaces available

See how C2.8 compares against frequently compared products.

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

By sharing your information you’re giving Caterpillar permission to process your data to appropriately fulfill your request. Depending on your request, we may need to share your data with applicable dealers, within the Caterpillar group of companies, and applicable service providers operating on Caterpillar's behalf. Taking care of your information is a responsibility we take seriously. Our Website Privacy Notice details our data privacy practices and your rights to control your personal data.

*Marketing Consent

Check out current offers for the C2.8

View More Offers