C9 ACERT™ Water-Cooled Manifold

Well Service Engines C9 ACERT™ (Hazardous Location)

Request A Price Find Dealer

Key Specs

Maximum Rating
340 BHP
254 bkW
Emissions
EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
Displacement
537.96 in³
8.82 l

Overview

Cat C9 ACERT hazardous location engines are the ideal solution for specialized and demanding operations in the oilfield. Engines are hazardous-location certified from the factory to minimize installation design, time, and cost. Decades of field operation and intense research and development allow Cat C9 ACERT hazardous location engines to deliver excellent performance with low operating costs and emissions.Hazardous location engines are certified to operate in potentially explosive environments. Applications powered by C9 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C9 ACERT hazardous location engines, with ratings 254 bkW (340 bhp) @ 2200 rpm meet IMO Tier II, EPA Non-road Tier 3 equivalent and EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Product Specifications for C9 ACERT™ (Hazardous Location)

Maximum Rating 340 BHP 254 bkW
Displacement 537.96 in³ 8.82 l
Minimum Rating 325 BHP 242 bkW
Governor and Protection Electronic (ADEM™ A4) Electronic (ADEM™ A4)
RPM 2200 r/min 2200 r/min
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Flywheel and Flywheel Housing SAE 1 or 2 SAE 1 or 2
Flywheel Teeth 113 (SAE 1), 134 (SAE 2) 113 (SAE 1), 134 (SAE 2)
Rotation from Flywheel End Counterclockwise Counterclockwise
Stroke 5.8 in 149 mm
Bore 4.4 in 112 mm
Emissions EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
Length 43 in 1092 mm
Width 32.6 in 828 mm
Height 40.3 in 1024 mm
Weight 1578 lb 716 kg
Lube Oil System - Refill 8 gal (US) 30.3 l
Cooling System 3.7 gal (US) 13.9 l

C9 ACERT™ (Hazardous Location) Standard Equipment

Air Inlet System

  • Turbocharger, separate circuit (SCAC) or remote (REMAC) aftercooler
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Air inlet 101.6 mm (4 in) connection type

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Fuel cooled ECU
  • Power compensation for fuel temperature
  • Programmable low and high idle
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speed, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Certified electrical control system (hazardous environment only)
  • Derated engine: automatic ambient temperature compensation

Cooling System

  • Thermostats and housing, RH forward-facing outlet — 51 mm (2.01 in) connection
  • Jacket water pump — belt-driven, centrifugal
  • Water pump — inlet RH facing downward 63 mm (2.48 in)

Exhaust System

  • Exhaust manifold — wet
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Rear facing turbo exhaust 81.8 mm (3.22 in.) connection, non V-band clamp

Flywheels and Flywheel Housing

  • Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation

Fuel System

  • HEUI fuel system
  • Fuel filter — secondary, LH (2-micron high performance)
  • Fuel transfer pump — left front
  • Fuel priming pump — left front

Lube System

  • Crankcase breather — LH
  • Crankcase fumes disposal — with integrated service indicator, LH
  • Oil cooler — RH
  • Oil filter — RH
  • Oil pan — front sump
  • Oil filler — top mounted
  • Oil level gauge — LH side
  • Oil pump — gear-driven
  • Oil valve sampling
  • Preservation of turbocharger, flywheel, and crankcase

Power Take-Offs

  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (7/8 in) wide

General

  • Vibration damper
  • Lifting eyes
  • Automatic variable timing — electronic
  • Literature

Mandatory Options

  • Flywheel housing and flywheel
  • Primary filter/water separator
  • Turbo orientation

C9 ACERT™ (Hazardous Location) Optional Equipment

Air Inlet System

  • Air inlet elbow
  • Air shutoffs

Cooling System

  • Water outlet elbow
  • Coolant conditioner

Flywheels and Flywheel Housing

  • Crankshaft seal

Instrumentation

  • Gauges and instrument panels
  • Interconnect harness

Lube System

  • Oil pans
  • Drain and cover
  • Remote oil filters
  • Lubricating oils

Mounting System

  • Structural steel base
  • Engine support — front and rear

Power Take-Offs

  • Rear enclosed clutches
  • Hydraulic pump drives
  • Hydraulic gear pumps
  • Clutch supports
  • Crankshaft pulleys
  • Transmission Arrangement
  • General

See how C9 ACERT™ (Hazardous Location) compares against frequently compared products.

Product Brochures and More Are Ready to Download!

Media Gallery

C9 ACERT™ Water-Cooled Manifold

C9 ACERT™ Water-Cooled Manifold

Check out current offers for the C9 ACERT™ (Hazardous Location)

View More Offers