3516C HD Well Servicing Engines

Well Service Engines 3516C HD

Request A Price Find Dealer

Key Specs

Maximum Rating
3300 BHP
2461 bkW
Emissions
EPA Non-Road Tier 2, IMO II and China Stage III
EPA Non-Road Tier 2, IMO II and China Stage III
Displacement
3173 in³
52 l

Overview

Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Product Specifications for 3516C HD

Maximum Rating 3300 BHP 2461 bkW
Displacement 3173 in³ 52 l
Minimum Rating 3000 BHP 2237 bkW
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Flywheel and Flywheel Housing SAE No. 0 SAE No. 0
Flywheel Teeth 151 151
Stroke 8.46 in 215 mm
Bore 6.69 in 170 mm
Emissions EPA Non-Road Tier 2, IMO II and China Stage III EPA Non-Road Tier 2, IMO II and China Stage III
Length 135.83 in 3450 mm
Width 66.5 in 1688 mm
Height 73.3 in 1862 mm
Weight 10590 lb 4803.6 kg

3516C HD Standard Equipment

Air Inlet System

  • Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)
  • Dual rear-mounted turbochargers

Control System

  • ADEM A3 ECU — LH
  • Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)

Cooling System

  • Torque converter connections
  • Thermostats and housing, jacket water pump, gear-driven centrifugal
  • Connections for radiator cooling
  • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
  • Separate Circuit Aftercooler (SCAC)

Exhaust System

  • Exhaust manifold — dry, stainless steel bellows
  • Dual turbochargers with watercooled bearings
  • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.

Flywheels and Flywheel Housing

  • Flywheel, SAE No. 0 — 151 teeth
  • Flywheel housing — SAE No. 0

Fuel System

  • Primary fuel filter
  • Fuel priming pump
  • Fuel filter — RH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors

Instrumentation

  • No standard instrumentation
  • Optional, remote instrumentation available
  • Service meter

Lube System

  • Crankcase breather — top-mounted
  • Oil cooler
  • Oil filler and dipstick — RH
  • Oil pump
  • Oil filter — RH spin-on type
  • Rear sump oil pan, 250-hour change interval
  • Oil pan drain valve — 3/4" NPT female connection

Mounting System

  • Trunion front support

Power Take-Offs

  • Front housing — two-sided

Protection System

  • ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40-pin customer interface connection
  • Air inlet shutoff

General

  • Paint — Cat yellow
  • Vibration damper and guard
  • Lifting eyes
  • B-Series LAND

3516C HD Optional Equipment

Air Inlet System

  • Air cleaner and air cleaner mounting
  • Remote air inlet adapters
  • Air inlet heater

Charging System

  • Battery chargers
  • Charging alternators

Control System

  • Local speed throttle control
  • Throttle position sensors
  • Load sharing modules
  • Governor conversion

Cooling System

  • High gloss black folded core radiators
  • Coolant regulator conversion
  • Belt guard and radiator guard
  • Blower fan
  • Radiator cover
  • Fan drive and fan pulleys
  • Water level switch gauge
  • Coolant level sensors
  • Coolant conditioner
  • Expansion tank
  • Heat exchanger cooling conversion
  • Auxiliary water pump
  • Air separator

Emissions Certifications

  • IMO Certification and European Union Certification

Exhaust System

  • Flexible exhaust fitting
  • Elbows and flange
  • Flange and exhaust adapters
  • Manifold and mufflers

Fuel Systems

  • Flexible fuel lines
  • Fuel cooler
  • Water/fuel separator
  • Fuel level switch

Instrumentation

  • Customer management device
  • Remote panel display and remote cylinder temperature display
  • Switches and contactors
  • Gauges and instrument panels

Lube System

  • Fumes disposal
  • Oil pans
  • Prelube options
  • Sump pumps
  • Oil Filters

Mounting System

  • Base remova
  • Vibration isolators
  • Rails

Power Take-Offs

  • Front housing
  • Flexible couplings
  • Coupling hub
  • Front accessory drives
  • Auxiliary drive shaft
  • Auxiliary drive pulleys
  • Front stub shaft
  • Damper guard removal
  • Pulleys
  • Flywheel stub shaft

Marine Society Requirements

  • Marine society conversion
  • Spray shielding

Protection System

  • Shutoffs
  • Switches and contractors
  • Explosion relief valve
  • Sensors
  • Oil pressure monitor
  • Shutoff controls
  • Corrosion protection

Starting System

  • Air starting motors — electric
  • Air pressure regulator
  • Air silencer
  • Hydraulic starter
  • Air start controls — manual, electric
  • Redundant start
  • Starting aids
  • Battery sets - 24V
  • Battery cable and battery rack

See how 3516C HD compares against frequently compared products.

Use the comparison tool to compare detailed specs of Cat and competitor models.

Compare All Models

Product Brochures and More Are Ready to Download!

Media Gallery

3516C HD Well Servicing Engines

3516C HD Well Servicing Engines

360 View

Check out current offers for the 3516C HD

View More Offers