C13 ACERT™ Dry Manifold Engine

Well Service Engines C13 ACERT™ (Dry Manifold)

Request A Price Find Dealer

Key Specs

Maximum Rating
520 BHP
387 bkW
Emissions
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Displacement
760 in³
12.5 l

Overview

Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.

Product Specifications for C13 ACERT™ (Dry Manifold)

Maximum Rating 520 BHP 387 bkW
Displacement 760 in³ 12.5 l
Minimum Rating 385 BHP 287 bkW
Governor and Protection Electronic (ADEM™ A3) Electronic (ADEM™ A3)
RPM 2100 r/min 2100 r/min
Aspiration Turbocharged-Aftercooled Turbocharged-Aftercooled
Flywheel and Flywheel Housing SAE 1 SAE 1
Flywheel Teeth 113 113
Rotation from Flywheel End Counterclockwise Counterclockwise
Stroke 6.2 in 157 mm
Bore 5.1 in 130 mm
Emissions EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Length 47.3 in 1201 mm
Width 39.9 in 1013 mm
Height 46.7 in 1186 mm
Weight 1976 lb 896 kg
Lube Oil System - Refill 9 gal (US) 34 l
Cooling System 3.8 gal (US) 14.4 l

C13 ACERT™ (Dry Manifold) Standard Equipment

Air Inlet System

  • Turbocharger, mid-mounted
  • Air inlet elbow 90°, 104.5 mm (4.11" OD) hose connection

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Engine monitoring system — speed, temperature, pressure
  • J1939 Broadcast — diagnostic and engine status

Cooling System

  • Thermostats and housing
  • Jacket water pump — gear-driven
  • Front water pump inlet

Exhaust System

  • Exhaust manifold — dry
  • Front turbo exhaust

Flywheels and Flywheel Housings

  • See Mandatory Options

Fuel System

  • Electronic unit injector
  • Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
  • Fuel transfer pump — front
  • Fuel priming pump — LH mid-mount
  • Fuel fitting — fuel return connection: straight No. 8, 5/8-18

Lube System

  • Crankcase breather
  • Oil cooler
  • Oil filter — RH
  • Oil pan — front sump, 40 L capacity
  • Oil filler — LH front
  • Oil dipstick — LH front
  • Oil pump
  • Oil valve sampling — RH rear engine side

Power Take-Offs

  • Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
  • Hydraulic pump drive — SAE A, 11-tooth
  • 1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)

General

  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit (connectors, pins, sockets)
  • Literature

Mandatory Options

  • Flywheel housing or rear PTO
  • Throttle position sensor
  • Primary filter/water separator

C13 ACERT™ (Dry Manifold) Optional Equipment

Air Compressor

  • Air compressors
  • Air chambers
  • Air compressor governors

Air Inlet System

  • Air cleaners
  • Precleaners
  • Air lines
  • Air inlet gasket

Belt-Driven Accessories

  • Refrigerant compressor and mounting

Charging System

  • Charging alternators
  • Alternator mountings
  • Alternator guard
  • Alternator accessories

Control System

  • Connection

Cooling System

  • Radiator — installed
  • Fan drive f/u/w Caterpillar installed radiator
  • Fan drive pulleys f/u/w customer-supplied radiators
  • Coolant conditioner
  • Water lines — pump inlet
  • Fan drive mountings
  • Fan height instructions
  • Fan adapters for suction fans and blower fans
  • Suction fans and blower fans
  • Coolant level sensor
  • Aftercooler lines

Exhaust System

  • Muffler
  • Flexible fitting
  • Elbows, flange, pipe, clamp
  • Straight exhaust adapter

Fuel System

  • Fuel lines for fuel filter
  • Fuel cooler
  • Fuel fitting — fuel return connection
  • Flexible fuel lines

Instrumentation

  • Gauges and instrument panels
  • Voltmeters
  • Gauge mounting
  • Ammeter

Lube System

  • Oil pan
  • Oil pan drain
  • Oil level gauges
  • Oil filter — bypass and remote
  • Lubricating oil
  • Oil filler
  • Fumes disposal

Mounting System

  • Front and rear engine supports
  • Structural steel base

Power Take-Offs

  • Crankshaft pulleys
  • Crankshaft pulley — stack-on
  • Output flange
  • Flywheel stub shaft
  • Front stub shaft
  • Hydraulic pump drive
  • Hydraulic pumps — front and rear
  • Enclosed clutch
  • Clutch support

Protection System

  • Air shutoff
  • Air shutoff switch

Starting System

  • Starting System
  • Starting aids
  • Battery sets — 24 Volt, dry
  • Battery cable
  • Battery rack

Transmission Arrangement

  • Transmission cooler

See how C13 ACERT™ (Dry Manifold) compares against frequently compared products.

Product Brochures and More Are Ready to Download!

Media Gallery

C13 ACERT™ Dry Manifold Engine

C13 ACERT™ Dry Manifold Engine

Check out current offers for the C13 ACERT™ (Dry Manifold)

View More Offers