Technical Summary
| Rating Range | 30-5000A 30-5000A |
| Transfer Type | Open / Closed / Delayed Open / Closed / Delayed |
| Switch Type | Molded Case and Power Breaker Molded Case and Power Breaker |
ATS ATC Breaker / Contactor ATC Service Entrance Rated MCCB & Power Breaker Based ATS
Request A Price Find DealerKey Specs
- Rating Range
- 30-5000A
- 30-5000A
- Transfer Type
- Open / Closed / Delayed
- Open / Closed / Delayed
- Switch Type
- Molded Case and Power Breaker
- Molded Case and Power Breaker
Overview
Cat® Service Entrance Rated (SER) automatic transfer switches (ATS) are designed to provide standby power emergency power to entire installation loads to protect against utility power interruption; yet allow the ATS to be as close as possible to the point of service entrance. By safely and in code compliance, integrating the necessary overcurrent protection and service disconnecting means into the automatic transfer switch, a single installation can be made at the service entrance. This design eliminates the need for a separate upstream fault protection and respective interconnections, which in turn reduces installation space, time, and cost. Breaker-based Service Entrance Rated transfer switches are available from 30A to 5000A.
Benefits
ATC-300+ or ATC-900 on MCCB & Power Breaker ATS products Keyed service entrance switch
Draw-out type breakers (available on Power Breaker ratings) UL 891 for 4000-5000A
All controls relays and industrial grade relays
Lugs are 90� rated and all control wire is #16 AWG, type XLPE with a 125� temperature rating
Durable powder-coated steel NEMA 1, 3R or 12 enclosures with three door hinges.
The hinges have removable hinge pins to facilitate door removal and are supplied with pad-lockable latches.
Features At A Glance
- ATC-100 on Residential & Light Commercial MCCB based, ATC-300+ or ATC-800 on MCCB & Power Breaker ATS products
- UL 1008 service entrance listed (up to 3200A)
- Service disconnect (both off) capability
- Integral over current protection
- Lockout when in disconnected position (only)
- Service entrance labeled
- Integrated Design
- Disconnecting neutral assembly
- Ground fault protection capability (all ratings)
(Required by code on rating 480V, and 1000A or higher) - Keyed service entrance switch
- Draw-out type breakers (available on Power Breaker ratings)
- UL 891 for 4000-5000A
- Loads protected against extended power loss
- Quick restoration of the circuit after a trip (versus a fused circuit that requires fuse availability)
- Trip on a fault prohibits transfer to the emergency source
- Fused circuit allows switch testing by simulating an actual power failure
- Lockable disconnect position permits safe downstream maintenance
Product Specifications for ATC Service Entrance Rated MCCB & Power Breaker Based ATS
Ratings
| MCCB | 30-1000A 2, 3, or 4 Pole 30-1000A 2, 3, or 4 Pole |
| Fixed Mount Power Breaker | 200-3200A 2, 3, 4-Pole 200-3200A 2, 3, 4-Pole |
| Drawout Power Breaker | 200-5000A 2, 3, or 4-Pole 200-5000A 2, 3, or 4-Pole |
| System Voltage Application | 120-600 Vac 50/60 Hz 120-600 Vac 50/60 Hz |
| Withstand | (Power Breaker) Up to 100 kAIC at 600V 3 cycles (Power Breaker) Up to 100 kAIC at 600V 3 cycles |
| Applicable Testing |
UL 1008 listed up to 3200A 4000A, and 5000A UL 891 listed UL 1008 listed up to 3200A 4000A, and 5000A UL 891 listed |
ATC Service Entrance Rated MCCB & Power Breaker Based ATS Standard Equipment
Controls and Wiring
- All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.
Enclosure
- Durable powder-coated steel NEMA 1, 3R or 12 enclosures with three door hinges to ensure proper support of the door and door mounted devices. The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.
ATC Service Entrance Rated MCCB & Power Breaker Based ATS Optional Equipment
Available Options
- 4-position test switch
- Remote communications
- Surge suppression
- Selectable automatic or non-automatic operation
- Seismic Zone 4 Qualified (BOCA, CBC, IBC, UBC and OSHPD)
- Communications for the ATC-300+ controller via RS-232 or Modbus through an integrated RS-485 port
- Field selectable, multi ratio, control voltage transformer 50/60 Hz
- Load sequencing contacts
- Multi-meter options available
- Open, closed or delayed transition
- Space heaters
- Integral overcurrent protection
Optional Delayed Transition includes:
- Pre-transfer signal with 1 N.O. and 1 N.C. contacts
- Time delay neutral
assignment Product Brochures and More Are Ready to Download!
Caterpillar product brochures and other informational documents are available for your growing business.
See how ATC Service Entrance Rated MCCB & Power Breaker Based ATS compares against frequently compared products.
Electric Power
ATC Service Entrance Rated MCCB & Power Breaker Based ATS
Selected
- Rating Range
- 30-5000A
- 30-5000A
- Transfer Type
- Open / Closed / Delayed
- Open / Closed / Delayed
- Switch Type
- Molded Case and Power Breaker
- Molded Case and Power Breaker
Electric Power
ATC Molded Case Circuit Breaker & Molded Case Switch ATS
- Rating Range
- 30-1000A
- 30-1000A
- Transfer Type
- Open transition
- Open transition
- Switch Type
- Molded Case
- Molded Case
Electric Power
ATC Contactor Based Bypass Isolation Automatic Transfer Switch
- Rating Range
- 100 to 3000A
- 100 to 3000A
- Transfer Type
- Bypass Isolation
- Bypass Isolation
- Switch Type
- Contactor Based
- Contactor Based
Check out current offers for the ATC Service Entrance Rated MCCB & Power Breaker Based ATS
View More Offers