Diesel Generator Sets 3516B (50 Hz)

Product Specifications for 3516B (50 Hz)

3516B (50 Hz) Standard Equipment

Air Inlet System

• Air cleaner; single element canister type

Cooling

• Package mounted radiator

Exhaust

• Exhaust flange outlet

Fuel

• Primary fuel filter with integral water separator

• Secondary fuel filters

Generator

• Matched to the performance and output characteristics of Cat engines

• IP23 Protection

Power Termination

• Busbar

Control Panels

• Engine cool-down timer

• Frequency (Hz)

• DC volts

• Volts (L-L & L-N)

• Customizable screens

• Limiter and exciter diode monitor

• Power factor (per phase & average)

• 1 Programmable relay outputs (Form C

• Text alarm/event descriptions

• Speed adjust

• 1 Programmable digital outputs

• Overspeed - Emergency stop

• 4 Programmable relay outputs (Form A)

• Emergency stop - Failure to start (overcrank)

• Reverse reactive power (kVAr) (32RV)

• 6 Customer programmable digital inputs

• Customer data link (Modbus RTU)

• Emergency stop pushbutton

• Environmental sealed front face

• kW-hr (total) - kVAr-hr (total)

• Cat connect

• Load histogram feature

• RPM - DC volts

• Failure to start (overcrank)

• Serial annunciator module data link

• Coolant temperature

• Operating hours

• kW (per phase, average & percent)

• IVR includes:

• Low coolant temperature

• Reactive droop capability

• Generator set packages include Caterpillar's voltage regulator

• Digital indication for:

• KVAR/PF modes

• Lamp test

• Controls:

• PLC functionality

• 0 True RMS AC metering, 3-phase, +/-2% accuracy

• Oil pressure (psi, kPa or bar)

• Generator mounted - rear facing

• Amps (per phase & average)

• Low coolant level

• 3 Analog inputs

• Reverse power (kW) (32)

• 24 Volt DC operation

• Over/under voltage (2 7/ 59)

• Over/under frequency (81 o/u)

• RFI suppression

• 3 Phase voltage sensing

• Cat ECS 100

• Alarm acknowledge

• Auto/start/stop control

• kVA (per phase, average & percent)

• Min / max exciter

• Engine cycle crank

• Low oil pressure

• Accessory module data link

• High coolant temperature

• Warning/shutdown with common LED indication of shutdowns for:

• Communications:

• Overcurrent (50 / 51)

• Number of I/O varies on options selected

• Programmable protective relaying functions:

Control Panel

• Cat ECS Genset controller

Cooling System

• Certified standard PGS provided

Exhaust System

• Dry exhaust manifold

• Flanged faced outlet(s)

Fuel System

• Secondary fuel filters

• Flexible fuel lines - shipped loose

• Fuel cooler; not included with packages without radiator

• Fuel priming pump

General

• Paint - Caterpillar yellow except rails and radiators gloss black

• Right hand servicing

• Flywheel and flywheel housing - SAE No. 00

• SAE standard rotation

• Caterpillar yellow with high gloss black rails and radiator

Generator and Attachments

• Busbar connections, right side extension box, bottom cable entry

• 3 Phase brushless, Salient pole

• Form wound - Permanent magnet excitation (PMG)

• Anti-condensation space heater

• Busbar connections, top center mounted, top cable entry

• 6 Leads

• Winding temperature detectors

• Class H temperature rise at 40C ambient (125C prime / 150C standby)

• Form wound

• Internal excitation (IE)

• NEMA Class H insulation

• Low voltage:

• Random wound

• High voltage:

• Medium voltage:

• Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby

• Permanent magnet excitation (PMG)

• NEMA standard hole pattern

Governing System

• ADEM A3

Literature

• Parts book

Lubrication System

• Fumes disposal

• Oil drain lines and valve

• Lubricating oil

• Integral lube oil cool

• Oil filter, filler and dipstick

• Gear type lube oil pump

Mounting System

• Rails - Engine/generator/radiator mounting

• Anti-vibration mounts (shipped loose)

• Rubber anti-vibration mounts - shipped loose

Starting System

• Battery and battery rack w/cables

• 24 Volt electric starting motor

• Battery disconnect switch

• 45 Amp Charging alternator

3516B (50 Hz) Optional Equipment

Control System

• EMCP 4.4

Exhaust

• Exhaust mufflers

Air Inlet System

• Single element filter

• Dual element air cleaner

Generator

• Oversize and premium generators

• Permanent magnet excitation (PMG)

• Anti-condensation heater

• Internal excitation (IE)

Cooling System

• Standard ambient radiators

• Coolant

• Optional installed radiators

• Optional installed ATAAC radiators

• Standard ambient ATAAC radiators

• Water level switch gauges

Power Termination

• Circuit breakers, IEC compliant

• Circuit breakers, UL listed

Crankcase System

• Ventilation system

• Explosion relief valves

• No explosion relief valves

Control Panels

• Remote monitoring software

• Load share module

• Digital I/O module

• Generator temperature monitoring & protection

Exhaust System

• Y Adapters

• Elbows

• Mufflers

• Flange and exhaust expanders

• Clean emission parts

• Tier 4 dosing cabinet

• Exhaust offset

• Flexible fittings

• Tier 4 clean emission MOD Kits

• Flanges

• Tier 4 clean emissions module

Fuel System

• Primary fuel filter

• Fuel priming pumps (Tier 4) - Manual or electric

Starting/Charging

• Air starting motor with control and silencer

• Charging alternator

• Oversize batteries

• Heavy duty starting system

Generators and Attachments

• Differential current transformers (DCT)

• Thermostat for space heater

• Differential current transformers (DCT) 8.7 kV and 15 kV classes

• Alternator air cleaner

• Generator conversion

• Space heater

• Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

• Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames

Instrumentation

• Pyrometer and thermocouples

General

• Special paint (Colors other than Caterpillar yellow or high performance paints)

• US aid emblem

• EEC Declaration of Conformity

• Automatic transfer switches (ATS)

• CSA Certification

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

• Enclosures: Sound attenuated, weather protective

• The following options are based on regional and product configuration:

• Integral & sub-base fuel tanks

• EU Certificate of Conformance (CE)

• Integral & sub-base UL listed dual wall fuel tanks

• UL 2200 package

Lubrication System

• Lube oil in standard sump

• Oil level regulator

• Prelube pumps

Mounting System

• IBC vibration isolators

• Spring type vibration isolators

• Puck style low efficiency isolators

Mounting

• IBC isolators

Power Connections

• Neutral ground connections

• Center post busbars

• Low voltage Circuit breakers

• 2700 Frame, four lead, four terminal

• Right side power connections

• Ground cables between generator and terminal box

• Rear power connections

• Left side power connections

Special Tests / Reports

• Standard engine test charge

• Torsional vibration analysis reports

• PGS Test report @ 1.0 power factor

• Fuel consumption test

• IBC Certification

• Canadian Standards Association certification

• PGS Test report @ 0.8 power factor

• Generator test report

• Generator set fuel consumption test

• OSHPD Certification

Starting and Charging

• Air starting motors

• Jacket water heaters

• Starter cover

• 10, 20, 35 and 50 Amp Battery chargers

• Air pressure regulator

• Electric starting motors

• Engine barring device

• 24 Volt battery set - Dry

Extended Service Coverage

• Platinum, Gold and Silver coverage