Diesel Generator Sets 3516 (60 Hz)

Product Specifications for 3516 (60 Hz)

3516 (60 Hz) Standard Equipment

Air Inlet System

• Air cleaner; single element canister type

Control Panels

• Accessory module data link

• Low coolant level

• Environmental sealed front face

• EMCP 4.2B

• 6 Customer programmable digital inputs

• Communications:

• Load histogram feature

• Overspeed

• Alarm acknowledge

• kW-hr (total)

• 24 Volt DC operation

• Over/under voltage (27/59)

• 1 programmable relay outputs (Form C)

• kVAr-hr (total)

• Emergency stop pushbutton

• PLC functionality

• Speed adjust

• Lamp test

• Auto/start/stop control

• Over/under frequency (81 o/u)

• Generator phase sequence

• Revers Power (kW) (32)

• Oil pressure (psi, kPa or bar

• Coolant temperature

• RPM

• Overcurrent (50/51)

• IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min / max exciter. Limiter and exciter diode monitor

• Controls:

• Number of I/O varies on options selected

• Power factor (per phase & average)

• 0 True RMS AC metering, 3-phase, +/-2% accuracy

• kVA (per phase, average & percent)

• Serial annunciator module data link

• Customizable screens

• Generator mounted - rear facing

• kW (per phase, average & percent)

• Text alarm/event descriptions

• DC volts

• Low oil pressure

• Controls: Speed adjust - Auto/start/stop control - Engine cool-down timer - Engine cycle crank - Alarm acknowledge - Lamp test - Load histogram feature - PLC functionality - Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy

• Reverse reactive power (kVAr) (32RV

• Frequency (Hz)

• Low coolant temperature

• 3 Analog inputs

• Cat connect

• kVAr (per phase, average & percent)

• Warning/shutdown with common LED indication of shutdowns for:

• Engine cycle crank

• Failure to start (overcrank)

• Programmable protective relaying functions:

• Emergency stop

• Customer data link (Modbus RTU

• Engine cool-down timer

• Volts (L-L & L-N)

• Amps (per phase & average)

• Operating hours

• High coolant temperature

• Digital indication for:

• 1 programmable digital outputs

• 4 programmable relay outputs (Form A)

Cooling System

• Certified standard PGS provided

Exhaust System

• Flanged faced outlet(s)

• Dry exhaust manifold

Fuel System

• Secondary fuel filters

• Fuel cooler; not included with packages without radiator

• Flexible fuel lines - shipped loose

• Fuel priming pump

General

• Right hand servicing

• Flywheel and flywheel housing - SAE No. 00

• SAE standard rotation

Generator and Attachments

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)

• Winding temperature detectors

• Winding temperature detectors

• Permanent magnet excitation (PMG)

• Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)

• Six lead

• Permanent magnet excitation (PMG)

• Internal excitation (IE)

• 3 Phase brushless, Salient pole

• Winding temperature detectors

• Medium voltage:

• Random wound

• Anti-condensation space heater

• Low voltage:

• High voltage:

• Busbar connections, top center mounted, top cable entry

• Form wound

• Busbar connections, right side extension box, bottom cable entry

• Form wound

• NEMA standard hole pattern

• NEMA standard hole pattern

Governing System

• ADEM A3

Literature

• Parts book

Lubrication System

• Fumes disposal

• Lubricating oil

• Gear type lube oil pump

• Oil filter, filler and dipstick

• Oil drain lines and valve

• Integral lube oil cool

Mounting System

• Rails - engine/generator/radiator mounting

• Anti-vibration mounts (shipped loose)

• Rubber anti-vibration mounts - shipped loose

Starting System

• Battery and battery rack w/cables

• 45 Amp Charging alternator

• Battery disconnect switch

• 24 Volt electric starting motor

3516 (60 Hz) Optional Equipment

Control System

• Controller: EMCP 4.2B

• Local annunciator module: [ ] NFPA 110 [ ] Custom

Air Inlet System

• Dual element air cleaner

• Single element filter

Cooling System

• Standard ambient radiators

• Coolant

• Optional installed ATAAC radiators

• Optional installed radiators

• Water level switch gauges

• Standard ambient ATAAC radiators

Engine Options

• Starting motors: [ ] Standard [ ] Heavy duty

• Batteries: [ ] Standard (1400 CCA) [ ] Heavy Duty (2800 CCA)

• Starting aids: [ ] 220V 50 Hz Jacket water heater

• Battery charger: [ ] 10A [ ] 20A [ ] 35A

• Air cleaner: [ ] Single element air cleaners [ ] Dual element air cleaners [ ] Heavy duty air cleaners

• Muffler: [ ] Industrial Grade

Crankcase System

• No explosion relief valves

• Ventilation system

• Explosion relief valves

Alternators

• Temperature rise (over 40°C ambient): [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C

Exhaust System

• Y Adapters

• Tier 4 clean emissions module

• Tier 4 dosing cabinet

• Elbows

• Tier 4 clean emission MOD Kits

• Exhaust offset

• Flanges

• Flange and exhaust expanders

• Flexible fittings

• Mufflers

• Clean emission parts

Fuel System

• Fuel priming pumps (Tier 4) - Manual or electric

• Primary fuel filter

General

• US aid emblem

• Special paint (Colors other than Caterpillar yellow or high performance paints)

• The following options are based on regional and product configuration:

• UL 2200 package

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Generators and Attachments

• High voltage: 12470, 13200, 13800 volts, 3 phase 1800 rpm,FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

• Generator conversion

• Low / Medium voltage: 380, 440, 480, 600 volts, 3 phase 1800 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

• Thermostat for space heater

• Low / Medium voltage: 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 Phase 1800 RPM, FW, PM, No. of Leads = 6, Pitch = .6667: 1600, 1800 Frame

• Alternator air cleaner

• Differential current transformers (DCT)

• High voltage: 6300, 6600, 6900 volts, 3 phase 1800 rpm, FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

• Differential current transformers (DCT) 8.7 kV and 15 kV classes

• Space heater kit

Power Termination

• Circuit breaker operation: [ ] Electrical

• Circuit breaker rating: [ ] 2000A [ ] 2500A [ ] 3200A [ ] 4000A

• Circuit breaker trip unit: [ ] LSI [ ] LSIG [ ] LSIG-P

• Power termination: [ ] Busbar [ ] Circuit breaker

Extended Service Contract (ESC)

• Extended Service Contract (ESC): [ ] 2 Year [ ] 3 Year [ ] 5 Year

Instrumentation

• Pyrometer and Thermocouples

Lubrication System

• Lube oil in standard sump

• Prelube pumps

• Oil level regulator

Mounting System

• Puck style low efficiency isolators

• Spring type vibration isolators

• IBC vibration isolators

Power Connections

• Ground cables between generator and terminal box

• Neutral ground connections

• 2700 Frame, four lead, four terminal

• Rear power connections

• Right side power connections

• Left side power connections

• Low voltage Circuit breakers

• Center post busbars

Special Tests / Reports

• Generator test report

• OSHPD Certification

• Canadian Standards Association certification

• PGS Test report @ 1.0 power factor

• IBC Certification

• Fuel consumption test

• Generator set fuel consumption test

• PGS Test report @ 0.8 power factor

• Standard engine test charge

• Torsional vibration analysis reports

Starting and Charging

• Electric starting motors

• Air pressure regulator

• Starter cover

• Air starting motors

• 24 Volt battery set - Dry

• 10, 20, 35 and 50 Amp Battery chargers

• Jacket water heaters

• Engine barring device

Extended Service Coverage

• Platinum, Gold and Silver coverage