Diesel Generator Sets 3512 (50 Hz)

Product Specifications for 3512 (50 Hz)

3512 (50 Hz) Standard Equipment

Air Inlet System

• Air cleaner; single element canister type with service indicator

Control Panel

• EMCP4.2B controls includes: Emergency stop pushbutton

• RPM

• Engine cool-down timer

• EMCP4.2B controller includes:

• Accessory module data link

• 4 programmable relay outputs (Form A)

• Communications:

• Volts (L-L & L-N)

• Over/under frequency (81 o / u)

• Text alarm/event descriptions

• Auto/start/stop control

• Speed adjust

• kVA (per phase, average & percent)

• Overcurrent (50 / 51)

• Alarm acknowledge

• Environmental sealed front face

• 6 programmable digital inputs

• Oil pressure (psi, kPa or bar)

• Amps (per phase & average)

• Generator phase sequence

• 2 Programmable digital outputs

• Low coolant temperature

• Controls:

• Serial annunciator module data link

• Reverse power (kW) (32)

• Lamp test

• Coolant temperature

• Engine cycle crank

• kVAr-hr (total)

• 2 Programmable relay outputs (Form C)

• Generator mounted - rear facing

• 24 Volt DC operation

• kVAr (per phase, average & percent)

• Warning/shutdown with common LED indication of shutdowns for:

• kW (per phase, average & percent)

• Reverse reactive power (kVAr) (32RV)

• Programmable protective relaying functions:

• Digital indication for:

• High coolant temperature

• Low oil pressure

• Overspeed

• Over/under voltage (27 / 59)

• Customer data link (Modbus RTU)

• DC volts

• Operating hours

• Low coolant level

• kW-hr (total)

• Frequency (Hz)

• Emergency stop

• Power factor (per phase & average)

• Failure to start (overcrank)

• True RMS AC metering, 3-phase, +/-2% accuracy

Cooling System

• JWAC

• Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)

• Radiator fan and fan drive

• Fan and belt guards

• Coolant drain line with valve

• Coolant level sensors (Not included with packages without radiator)

Exhaust System

• Dry exhaust manifold

• Flanged faced outlet(s)

Fuel System

• Fuel cooler; not included with packages without radiator

• Flexible fuel lines - shipped loose

• Fuel priming pump

• Secondary fuel filters

Generators and Attachments

• Generator set packages include: Regulator (CDVR)

• 6 Lead

• Min / max exciter limiter

• LV

• Reactive droop capability

• Random wound

• Exciter diode monitor

• KVAR/PF modes

• NEMA Class H insulation

• 50 Hz models: IEC standard hole pattern

• Caterpillar's digital voltage regulator (CDVR) includes:

• Note: 1800 Frames are form wound, permanent magnet excitation (PMG), with winding temp detectors

• Busbar connections, top center mounted, top cable entry

• Internal excitation (IE)

• Winding temperature detectors

• Class H temperature rise at 40C ambient (125C prime/150C standby)

• 3 Phase brushless, Salient pole

• 3 Phase voltage sensing

• RFI suppression

Governing System

• Woodward 2301A isochronous governor

Lube System

• Oil drain lines and valve

• Gear type lube oil pump

• Fumes disposal

• Oil filter, filler and dipstick

• Lubricating oil

• Integral lube Oil cooler

Mounting System

• Rubber anti-vibration mounts - shipped loose

• Rails - engine/generator/radiator mounting

Starting / Charging System

• 24 Volt electric starting motor

• Battery and battery rack w/cables

• Battery disconnect switch

General

• Paint - Caterpillar yellow with high gloss black rails & radiator

• SAE standard rotation

• RH service

• Flywheel and Flywheel housing - SAE No. 00

3512 (50 Hz) Optional Equipment

Air Inlet System

• Remote air inlet adaptors

• Air inlet protection

• Dual element air cleaners

Circuit breakers

• EMAX Circuit breakers

• Center posts busbars

• EMAX breakers connections

• Breaker harnesses

• 2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated Circuit breakers

• Controls packaging - Enclosures

• Cable entry options

• 2000, 2500, 3200 and 4000 Amp, 3 pole, IEC rated Circuit breakers

• Optional busbar power connections

• Busbar connections

Control Panel

• Auxiliary boxes

• Customer connection mounting locations

• Ground (Automatically selected)

• Vandle proof panel door

• Customer Interface options

• Mounting group - External box clips

• Remote speed adjust

• Generator temperature monitoring

• Governors

• Annunciator Modules

• Local PC monitoring

Cooling System

• Water level switch gauges

• Heat exchangers

• Optional radiator arrangements

European Certifications

• EU Declaration of Conformity

• Eurasian Conformity (EAC) mark

• European Directive genset, DoI (Declaration of Incorporation)

• European Union Certification

Exhaust System

• Through-wall installation kit

• Muffler mounting kits

• Mufflers

• Flexible fittings

Fuel System

• Primary fuel filter

Generators and Attachments

• 380 / 400 / 415 Volts @ 50 Hz, 3 phase, Form wound, Permanent magnet excitation (PMG), No. of leads = 6, pitch= 0.6667

• 380/400/415volts @ 50 Hz, 3 phase, random wound, Permanent magnet excitation (PMG), No. of leads = 6, pitch= 0.6667

• Generator conversion

• 380/400/415volts @ 50 Hz, 3 phase, random wound, Internal excitation (IE), No. of leads = 6, pitch= 0.6667

• Space heater

Instrumentation

• Pyrometer and thermocouples

Lube System

• Electric prelube pumps

• Oil level reg-1 shallow pan

• Manual prelube sump pumps

Mounting System

• Spring type vibration isolators

• IBC vibration isolators

Protection System

• Explosion relief valves

Special Tests / Reports

• Neutral grounding connection

• IBC seismic Certifications

• Neutral ground-LV

• PGS Test report @ 1.0 power factor

• PGS Test report @ 0.8 power factor

Starting / Charging Systems

• Ether starting aid

• 24 Volt dual electric starting motor

• 20 Amp Battery charger

• Oversize battery set

• Jacket water heaters

• 10 Amp Battery chargers

General

• Engine barring group