Diesel Generator Sets 3516C Tier 4 Final (60 Hz)

Product Specifications for 3516C Tier 4 Final (60 Hz)

3516C Tier 4 Final (60 Hz) Standard Equipment

Air Inlet System

• Air cleaner; single element canister type

Cooling

• Package mounted radiator

Exhaust

• Exhaust flange outlet

Control Panels

• Generator phase sequence

• 1 Programmable digital outputs

• KAR / PF modes

• Low coolant temperature

• PLC functionality

• Generator mounted - Rear facing

• Environmental sealed front face

• Generator set packages include:

• Auto/start/stop control

• Customer data link (Modbus RTU)

• High coolant temperature

• Warning/shutdown with common LED indication of shutdowns for:

• 0 True RMS AC metering, 3-phase, +/-2% accuracy

• Low coolant level

• Operating hours

• kVAr (per phase, average & percent)

• RFI suppression

• Emergency stop

• Digital indication for:

• Amps (per phase & average)

• Min / max exciter

• Number of I/O varies on options selected

• Load histogram feature

• Frequency (Hz)

• Overcurrent (50/51)

• Oil pressure (psi, kPa or bar)

• Lamp test

• Engine cool-down timer

• Cat connect

• kW-hr (total) - kVAr-hr (total)

• Limiter and exciter diode monitor

• Communications:

• Over/under frequency (81 o/u)

• 6 Customer programmable digital inputs

• Controls:

• Overspeed

• IVR includes reactive droop capability

• Low oil pressure

• RPM

• 24 Volt DC operation

• Volts (L-L & L-N)

• Text alarm/event descriptions

• 1 Programmable relay outputs (Form C)

• Controls: Speed adjust

• Reverse reactive power (kVAr) (32RV)

• Power factor (per phase & average)

• High coolant temperature

• Accessory module data link

• Customizable screens

• 4 programmable relay outputs (Form A)

• Caterpillar's voltage regulator

• Programmable protective relaying functions

• Alarm acknowledge

• Over/under voltage (27/59)

• DC volts

• kVA (per phase, average & percent)

• Failure to start (overcrank)

• Engine cycle crank

• 3 Phase voltage sensing

• Coolant temperature

• Serial annunciator module data link

• Emergency stop pushbutton

• Reverse power (kW) (32)

• kW (per phase, average & percent)

• 3 Analog inputs

Fuel

• Primary fuel filter with integral water separator

Generator

• Matched to the performance and output characteristics of Cat engines

• IP23 Protection

Power Termination

• Busbar

Control Panel

• Cat ECS Genset controller

Cooling System

• Certified standard PGS provided

Exhaust System

• Flanged faced outlet(s)

• Dry exhaust manifold

Fuel System

• Fuel cooler; not included with packages without radiator

• Secondary fuel filters

• Fuel priming pump

• Flexible fuel lines - shipped loose

General

• Right hand servicing

• Caterpillar yellow with high gloss black rails and radiator

• Paint - Caterpillar yellow except rails and radiators gloss black

• Flywheel and flywheel housing - SAE No. 00

• SAE standard rotation

Generator and Attachments

• Form wound

• High voltage:

• NEMA standard hole pattern

• Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)

• Low voltage: Random wound - Internal excitation (IE) - Winding temperature detectors - NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby) - Busbar connections, top center mounted, top cable entry - NEMA standard hole pattern

• Permanent magnet excitation (PMG)

• Medium voltage:

• 6 Lead

• 3 Phase brushless, Salient pole

• Busbar connections, right side extension box, bottom cable entry

• NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)

• Permanent magnet excitation (PMG)

• Anti-condensation space heater

• Winding temperature detectors

Governing System

• ADEM A3

Literature

• Parts book

Lubrication System

• Integral lube oil cool

• Oil drain lines and valve

• Gear type lube oil pump

• Fumes disposal

• Lubricating oil

• Oil filter, filler and dipstick

Mounting System

• Rails - engine/generator/radiator mounting

• Anti-vibration mounts (shipped loose)

• Rubber anti-vibration mounts - shipped loose

Starting System

• Battery and battery rack w/cables

• 45 Amp Charging alternator

• 24 Volt electric starting motor

• Battery disconnect switch

3516C Tier 4 Final (60 Hz) Optional Equipment

Control System

• EMCP 4.4

Air Inlet System

• Single element filter

• Dual element air cleaner

Exhaust

• Exhaust mufflers

Generator

• Internal excitation (IE)

• Anti-condensation heater

• Oversize and premium generators

• Permanent magnet excitation (PMG)

Cooling System

• Coolant

• Water level switch gauges

• Standard ambient radiators

• Optional installed ATAAC radiators

• Optional installed radiators

• Standard ambient ATAAC radiators

Power Termination

• Circuit breakers, UL listed

• Circuit breakers, IEC compliant

Crankcase System

• No explosion relief valves

• Explosion relief valves

• Ventilation system

Control Panels

• Remote monitoring software

• Digital I/O module

• Generator temperature monitoring & protection

• Load share module

Exhaust System

• Tier 4 clean emissions module

• Flexible fittings

• Flanges

• Tier 4 clean emission MOD Kits

• Mufflers

• Tier 4 dosing cabinet

• Flange and exhaust expanders

• Clean emission parts

• Exhaust offset

• Y Adapters

• Elbows

Mounting

• IBC isolators

Starting/Charging

• Battery chargers

• Heavy duty starting system

• Charging alternator

• Air starting motor with control and silencer

• Oversize batteries

Fuel System

• Primary fuel filter

• Fuel priming pumps (Tier 4) - Manual or electric

General

• Automatic transfer switches (ATS)

• The following options are based on regional and product configuration:

• EEC Declaration of Conformity

• Enclosures: Sound attenuated, weather protective

• UL 2200 package

• US aid emblem

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

• EU Certificate of Conformance (CE)

• Integral & sub-base UL listed dual wall fuel tanks

• CSA Certification

• Special paint (Colors other than Caterpillar yellow or high performance paints)

• Integral & sub-base fuel tanks

Generators and Attachments

• Low / Medium voltage: 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 Phase 1800 RPM, FW, PM, No. of Leads = 6, Pitch = .6667: 1600, 1800 Frame

• Generator conversion

• Thermostat for space heater

• Alternator air cleaner

• Differential current transformers (DCT) 8.7 kV and 15 kV classes

• Space heater kit

• High voltage: 6300, 6600, 6900 volts, 3 phase 1800 rpm, FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

• High voltage: 12470, 13200, 13800 volts, 3 phase 1800 rpm,FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

• Low / Medium voltage: 380, 440, 480, 600 volts, 3 phase 1800 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

Instrumentation

• Pyrometer and thermocouples

Lubrication System

• Lube oil in standard sump

• Prelube pumps

• Oil level regulator

Mounting System

• IBC vibration isolators

• Spring type vibration isolators

• Puck style low efficiency isolators

Power Connections

• Ground cables between generator and terminal box

• Right side power connections

• 2700 Frame, four lead, four terminal

• Neutral ground connections

• Center post busbars

• Rear power connections

• Left side power connections

• Low voltage Circuit breakers

Special Tests / Reports

• PGS Test report @ 1.0 power factor

• IBC Certification

• Canadian Standards Association certification

• PGS Test report @ 0.8 power factor

• Generator set fuel consumption test

• Generator test report

• Torsional vibration analysis reports

• Standard engine test charge

• OSHPD Certification

• Fuel consumption test

Starting and Charging

• Jacket water heaters

• Electric starting motors

• Air starting motors

• 10, 20, 35 and 50 Amp Battery chargers

• Air pressure regulator

• 24 Volt battery set - Dry

• Engine barring device

• Starter cover

Extended Service Coverage

• Platinum, Gold and Silver coverage