Diesel Generator Sets C15 (50 Hz)

Product Specifications for C15 (50 Hz)

C15 (50 Hz) Standard Equipment

Air System

• Turbocharger

• Aftercooler core

• Air cleaner - Non canister disposable paper filter

Air Inlet

• Air cleaner

Control Panel

• GCCP 1.3

Cooling

• Package mounted radiator

Cooling System

• Caterpillar extended life coolant

• Radiator and cooling fan with guard

• Fan drive, battery charging alternator drive

• Coolant drain line with valve

Exhaust

• Base, formed steel with single wall integral 8-hour fuel tank

• Standard open set fuel tank/base supplied

Fuel

• Primary fuel filter with integral water separator

• Secondary fuel filters

• Fuel priming pump

Fuel System

• Engine fuel transfer pump

• Primary fuel filter w/integral water separator and secondary filter

• Fuel priming pump

• Flexible fuel lines

• Fuel cooler

Generator

• Matched to the performance and output characteristics of Cat engines

• IP23 Protection

• Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Power Termination

• Busbar

Generator and Attachments

• Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

• Optional LC Frame generator - IP23 Protection

• Segregated low voltage (AC/DC) wiring panel

• Integrated voltage regulator (IVR)

• Power center, IP22

Mounting

• Rubber vibration isolators

Governing System

• Cat electronic governor (ADEM A4).

Lube System

• Oil cooler

• Oil drain valves

Mounting System

• Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Starting/Charging

• 24 Volt battery with rack and cables

General

• Engine and alternator pre paint, Caterpillar yellow

C15 (50 Hz) Optional Equipment

Air Inlet System

• Single element air cleaner

• Dual element air cleaner

Exhaust

• Industrial, residential, critical mufflers

Certifications

• EU Certificate of Conformance (CE)

• Global certification for CIS

Generator

• Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

• Oversize and premium generators

• Anti-condensation heater

Power Termination

• Circuit breakers, UL listed

• Circuit breakers, IEC compliant

Circuit breakers

• Shunt trip for IEC circuit breaker

• 4 Pole (IEC-100% rated) Circuit breakers - Package mounted

• Auxiliary contacts, circuit breaker

• 3 Pole (IEC-100% rated) Circuit breakers - Package mounted

• 3 Pole (IEC-100% rated) Circuit breakers - Motorised

• Power terminal strip

• 4 Pole (IEC-100% rated) Circuit breakers - Motorised

• Padlockable circuit breaker device

Generator and Attachments

• Permanent magnet excitation (PMG) generator

• LC frame CIP generator

• Oversize LC frame generator

• Space heaters

• CIP A Frame generator

• Oversize A Frame generator

• Ingress protection

• A Frame generator - IP21 Protection

• LC frame generator

Control Panels

• Fuel level sensor

• Volt free contacts

• Oil temperature displays

• Local annunciator

• GCCP 1.4

• Local alarm horn

• Remote annunciator module

Starting/Charging

• Oversize batteries

• Battery chargers

• Jacket water heater

• Heavy duty starting system

• Charging alternator

Cooling System

• Low coolant temperature alarm

• Stone guards

• Radiator duct flange

General

• Narrow, wide or skid base

• Single or dual wall integral fuel tanks

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

• The following options are based on regional and product configuration:

• Automatic transfer switches (ATS)

• Integral & sub-base UL listed dual wall fuel tanks

• CSA Certification

• EEC Declaration of Conformity

• Single or dual wall sub-base fuel tanks

• UL 2200 package

• Sound attenuated, weather protective or high ambient weather protective enclosure

• EU Certificate of Conformance (CE)

Enclosures

• High ambient sound attenuated enclosures

• Sound attenuated enclosures

Exhaust System

• 6 and 8 inch elbow kit

• Manifold and turbocharger guards

• End in/end out mufflers - 10, 25 and 35 dBA attenuation

• Engine mounted muffler

• 6 and 8 inch flange GP

• Flexible exhaust fittings

Fuel System

• Fuel transfer system controls

• Manual fuel transfer pump

• Dual wall fuel tank base

Lube System

• Manual sump pump

Mounting System

• Narrow skid base - replaces standard fuel tank base

Special Test / Reports

• PGS Test report @ 1.0 power factor

• PGS Test report @ 0.8 power factor

Starting / Charging System

• 5 Amp single Battery charger

• Jacket water heater

• Battery disconnect switch