C2.2 Turbocharged Industrial Power Unit

Industrial Diesel Power Units C2.2

Request A Price Find Dealer

Key Specs

Maximum Power
74 HP
55 kW
Maximum Torque
199 lb-ft @ 1600 rpm
270 Nm @ 1600 rpm
Emissions
EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)

Overview

The Cat?� C2.2 IPU is available as a turbocharged or turbocharged aftercooled, common rail direct injection engine meeting EU Stage V, U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emission standards. For ease of installation, the IPU provides full aftertreatment mounting, an integrated cooling system, a full wiring harness and mounted air filter.

Product Specifications for C2.2

Maximum Power 74 HP 55 kW
Maximum Torque 199 lb-ft @ 1600 rpm 270 Nm @ 1600 rpm
Rated Speed 2800 rpm 2800 rpm
Minimum Power 49 HP 36.4 kW
Emissions EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final) EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
Engine Configuration In-Line 4, 4-Stroke-Cycle Diesel In-Line 4, 4-Stroke-Cycle Diesel
Bore 3.3 in 84 mm
Stroke 3.9 in 100 mm
Displacement 135 in³ 2.2 l
Compression Ratio 17.0:1 17.0:1
Aspiration Turbocharged or Turbocharged Aftercooled Turbocharged or Turbocharged Aftercooled
Combustion System Direct Injection Direct Injection
Rotation from Flywheel End Counterclockwise Counterclockwise
Aftertreatment DOC+DPF DOC+DPF
Length 39.1 in 992 mm
Width 23.7 in 602 mm
Height 38.8 in 985 mm
Weight 721 lb 327 kg

C2.2 Standard Equipment

Control System

  • Alternator 12 volt 85 amp
  • Starter motor 12 volt
  • Glow plug starting aid, delivers heat directly to cylinder for best starting performance in cold weather
  • Electronic control unit - chassis mounted
  • Flexible and configurable software features and well supported SAE J1939 CAN bus enables highly integrated machines
  • Wiring harness connectors and sensors are waterproof and designed to withstand harsh off-highway environments

Flywheels and Flywheel Housing

  • SAE No. 4 standard flywheel housing
  • Choice of flywheel weight and bolting pattern to accommodate a range of industry-standard hydraulic pumps and transmissions

Fuel System

  • 2000 bar high-pressure common rail system
  • Proprietary fuel filters to ensure engine protection through correct service procedures, along with water-in-fuel detection, ensures maximum machine up-time for the operator

Lube System

  • Alternative oil fillers
  • Spin-on lube oil filter

Power Take Off (PTO)

  • SAE A PTO drive

General

  • Cast iron engine block
  • Cast iron exhaust manifold
  • Gradeability 35° continuous
  • Paint: Cat yellow

Aftertreatment/Clean Emissions Control Equipment

  • Diesel Oxidation Catalyst (DOC)
  • Diesel Particulate Filter (DPF)

See how C2.2 compares against frequently compared products.

Product Brochures and More Are Ready to Download!

Media Gallery

C2.2 Turbocharged Industrial Power Unit

C2.2 Turbocharged Aftercooled Industrial Power Unit

C2.2 Turbocharged Industrial Power Unit
C2.2 Turbocharged Aftercooled Industrial Power Unit

Check out current offers for the C2.2

View More Offers